XRocker 5140301 2.0 Bluetooth with RGB LED Light User Manual

2.0 BLUETOOTH
with RGB LED

NEED HELP?
EMAIL: SUPPORT@XROCKERGAMING.COM

IMPORTANT: You must keep your original retail receipt as proof of purchase.

WELCOME TO X ROCKER!

Thank you for purchasing this X Rocker gaming chair. You are now close to enhancing your favorite games with audio! To get started, please assemble the chair using the assembly instructions on the separate leaflet and then follow the instructions in this manual to get rocking!

Table of contents
4 Box contents and control panel overview
5 Wired Connection guide: TV (All consoles)
6 Connect by controller (PS4 only)
7 Bluetooth connection guide
8 Troubleshooting tips
9 Health and safety information
10 Power supply safety information

Control panel overview

1. Volume + On/Off| Rotate this dial to switch the chair on/off and increase the speaker volume
---|---
2. Colour Mode Button| Press this button to toggle between 30 different color modes
3. Output Socket| Allows you to connect multiple chairs or audio devices together
4. Input Socket| Plug the 3.5mm cable into here for audio from your TV or your controller.
5. Power Input| Plug your power supply into this socket

WIRED CONNECTION GUIDE: TV (ALL CONSOLES)

1. Connect B1 Cable to X Rocker control panel 3.5mm INPUT socket
2. Connect another end of the B1 cable to the TV headphone socket.
3. Once connected to your TV, increase volume to 50% of the maximum for the best sound level.**

*Note: If your TV does not feature a headphone socket then you may need to purchase an additional TOSlink adapter to get connected directly
to a console for audio.
**Depending on your TV you may need to Increase the headphone volume separately in the TV sound settings.

CONNECT BY CONTROLLER (PS4 systems only)

1. Connect the B1 cable to the bottom of the PS4 controller via the headset socket.
2. Connect the other end of the B1 cable to the chair via the green port.
3. With the PS4 turned on and in the main menu, press and hold the black PS button until the quick menu appears.
4. In this menu select [Adjust sound and devices]
5. Then select [output to headphones]
6. Change the setting from [Chat Only] to [All audio]
7. Make sure the volume in the previous menu is set to the maximum.

BLUETOOTH CONNECTION GUIDE

Step 1:
On the Audio output device go into its Bluetooth settings, turn Bluetooth on if it is not on already and search for XROCKER. Upon finding this,
select the XROCKER option. If a passcode is required the four digit code will be ‘0000’.

Step 2:
Once you’re connected, the Bluetooth indicator on the panel will light up.

TROUBLESHOOTING TIPS

correctly.
• Make sure that the power supply at the power source is working correctly.
• With the chair turned to the ON position, give the power cable a slight wiggle in the
port. If any lights flicker (or not) then please contact support (details below).
No sound| • Connect a mobile phone to the X Rocker using the phone connection guidelines in
the manual to test the chair for sound.
• Confirm that the device/system is correctly configured as per previous connection guide.
• Make sure that you indeed have a headphone socket on your TV. This will typically be marked with a headphone symbol or “H/P OUT”
Stereo speakers do not produce
sound / sound is faint| • Please make sure that the volume of the source device is at a higher level to strengthen the audio signal.
The cables connected to my
X Rocker have been broken
accidentally| • Please contact X Rocker support regarding this issue.
Don’t have a headphone socket
on your TV?| • You may need to purchase a TOSlink adapter. If you are unsure as to which to purchase then please contact X Rocker Support regarding this issue.

HEALTH AND SAFETY INFORMATION

• Avoid immersing or allowing the X Rocker to come into contact with liquids.
• Please consult X Rocker Support before unscrewing any of the electrical components on the chair.
• Please be mindful of any cabling laid out between the X Rocker and power source/audio device.
• Please be mindful of cabling attached when moving/swiveling the X Rocker.
• If the cables or electrical equipment are broken then this may present a choking risk, please contact Support for replacements and dispose of these parts safely.
• Do not stand on the X Rocker or exceed the 250lb weight limit via other means.
• Do not lean back on the chair to the point in which the pedestal would lift off the ground.
• X Rocker armrests are designed for support and comfort during gameplay, please do not use these as support for getting in/out of the chair.
• Playing audio for long periods at loud volumes may contribute to difficulties in hearing.
• Please be considerate to others when playing audio through the X Rocker speakers at higher volumes.

Power supply safety information

ATTENTION:
A. For Power Adapter, the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus;
B. For Power Adapter, the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable;
C. Only use the attachments/accessories specified by manufacturer.

Power Supply unit trademark: BI
Model name: BI12T-120100-BdU
Input: AC 100-240V~50/60Hz 0.5A
Output: DC 12V / 1A

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>