XRocker 4.1 Wireless & Bluetooth with Vibration User Manual

XRocker 4.1 Wireless & Bluetooth with Vibration

Welcome to X Rocker!

Thank you for purchasing this X Rocker gaming chair. You are now close to enhancing your favourite games with glorious audio!
To get started, please assemble the chair using the assembly instructions on the separate leaflet and then follow the instructions in this manual to get rocking!

Box contents

• B1 – 3m 3.5mm to 3.5mm Audio cable
• B2 – 15cm RCA to female 3.5mm audio cable
• B3 – RCA female to female adapters
• B4 – Power supply Cable
• B5 – Wireless DAC Transmitter
• B6 – 1m Optical Toslink Audio Cable
• B7 – Micro USB Cable

Control panel overview

PS4

Step 1: Make sure that the PS4™ system is switched OFF. Insert the micro USB cable
into the X Rocker DAC converter and the other end into one of the front USB ports on the PS4™ system. Remove the clear plastic covers from both ends of the optical cable. Input one end of the optical cable into the X Rocker Wireless DAC (Slot titled SPDIF) and the other into the Optical SPDIF connector on the PS4™ system.

Step 2: Turn the PS4™ system back on. Select one of the wireless bands (1,2,3) on the wireless DAC and then switch to the corresponding band on the chair.

Step 3: On the main PS4™ menu screen Select (Settings) [Sound and Screen]

[Audio Output Settings] >
[Primary Output Port] Change this to [Digitial Optical] > choose AAC.

Save, exit and enjoy!

Xbox One

Step 1: Make sure that the Xbox One™ system is switched OFF. Insert the micro USB cable into the X Rocker DAC converter and the other end into one of the back USB ports on the Xbox One™ system. Remove the clear plastic covers from both ends of the optical cable. Input one end of the optical cable into the X Rocker Wireless DAC Slot (labelled SPDIF) and another into the Optical SPDIF connector on the Xbox One™ system.

Step 2: Turn the Xbox One™ system back on. Select one of the wireless bands (1,2,3) on the wireless DAC and then switch to the corresponding band on the chair.

Step 3: On the Xbox One™ menu screen, Select (Settings) > [All Settings] [Display and Sound] > [Audio Output] > under [Digital Audio], select [Optical Audio] and set it to [Stero Uncompressed]

Save, exit and enjoy!

TV (All systems)

1. Connect B6 Optical Cable to the B3 Wireless DAC transmitter’s SPDIF Port.
2. Connect another end of the B6 Optical Cable to the TV Optical socket.
3. Connect Micro USB Cable to the transmitter and other ends to an available USB socket on the TV.
4. Once connected to your TV, increase the volume to 50% of the maximum for the best sound level.**

* N.B: If your TV does not feature a SPDIF or OPTICAL OUT Socket then you can instead use the 3.5mm audio connection to connect to a headphone socket.
** Depending on your TV you may need to enable the Optical output separately.

 TV (All consoles)

1. Connect B1 Cable to X Rocker control panel MP3 INPUT sockets.
2. Connect the other ends of the B1 3.5mm ends into the headphone socket of your television.
3. Once connected to your TV, increase the volume to 50% of the maximum for the best sound level. **

** Depending on your TV you may need to increase the headphone volume separately in the TV sound settings.

PS4 Controller only

1. Connect the Bl cable to the bottom of the PS4 controller via the headset socket.
2. Connect the other end of the Bl cable to the chair via the green port.
3. With the PS4 turned on, go to the main menu (or locate the main menu screen). Press and hold the PS button on the PS4 controller until the quick menu appears on screen.
4. In this menu select [Adjust sound and devices]
5. Then select [output to headphones]
6. Change the setting from [Chat Only] to [All audio]
7. Make sure the volume in the previous menu is set to the maximum.
8. Set the control panel Wireless switch to the ‘OFF position.

Bluetooth connection guide

Step 1: Switch the X Rocker’s wireless switch to the Bluetooth position.

Step 2:
On the Audio output device go into its Bluetooth settings, turn Bluetooth on if it is not on already and search for XROCKER. Upon finding this, select the XROCKER option. If a passcode is required the four digit code will be ‘0000’.

Troubleshooting tips

Issue & Troubleshooting steps 

• No power going to control panel

  • Make sure that the power cable is connected correctly.
  • Make sure that the power supply at the power source is working correctly.
  • With the chair turned to the ON position, give the power cable a slight wiggle in the port. If any lights flicker (or not)
    then please contact support (details below).

• No sound

  • Review the connection methods on the previous page and try alternative connection methods if possible.
  • Confirm that the device/system is correctly configured as per previous connection guide.
  • Make sure that the wireless channel switcher is in the corresponding position that suits your connection method.
    (1,2,3 for wireless and AUX for wired connections).

• Wireless transmitter cuts out during gameplay/No vibration or subwoofer sound via analogue connection

  • Please make sure that the volume of the source device is at a higher level to strengthen the audio signal.

• The cables connected to my X Rocker have been broken accidentally

  • Please contact X Rocker support (support@xrockergaming.com) regarding this issue.

• Interference over wireless connection

  • In this case, try another of the three wireless bands to isolate the signal.

Health and safety information

• Avoid immersing or allowing the X Rocker to come into contact with liquids.
• Please consult X Rocker Support before unscrewing any of the electrical components on the chair.
• Please be mindful of any cabling laid out between the X Rocker and power source/audio device.
• Please be mindful of cabling attached when moving/swivelling the X Rocker.
• If the cables or electrical equipment are broken then this may present a choking risk, please contact Support for replacements and dispose of these parts safely.
• Do not stand on the X Rocker or exceed the 250lbs weight limit via other means.
• Do not lean back on the chair to the point in which the pedestal would lift off the ground.
• X Rocker armrests are designed for support and comfort during gameplay, please do not use these as support for getting in/out of the chair.
• Playing audio for long periods at loud volumes may contribute to difficulties in hearing.
• Please be considerate to others when playing audio through the X Rocker speakers at higher volumes.

Power supply safety information

ATTENTION:

A. For Power Adapter, the apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus;
B. For Power Adapter, the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable;
C. Only use the attachments/accessories specified by the manufacturer.

• Power Supply unit trademark: BIr on;
• Model name: Bl24-1 20200-AdU;
• Input: 1 00-240 VAC,50/60Hz,0.8A;
• Output:DC 1 2V-2 A

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Need Help?
Email: support@xrockergaming.com www.xrockergaming.com
IMPORTANT: You must keep your original retail receipt as proof of purchase.

References

• X Rocker Gaming | Gaming Furniture Built For All Gamers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>