Insta360 4K120 Ace 8K Pro Action Camera User Manual

Insta360 4K120 Ace 8K Pro Action Camera

Specifications

• Indicator Light
• Front Screen
• Shutter Button
• Microphone
• Lens
• Quick Button
• Power Button
• USB Port Cover
• USB Type-C Port
• MicroSD Card Slot
• Battery Cover
• Battery
• Release Switch
• Flip Touchscreen
• Speaker
• Mounting Latch

Product Usage Instructions

Standard Accessories

Standard Mount:
Description: Secure your camera to any accessory for stable shots. Magnetic design for quick assembly and disassembly.

How to Use:

1. Align camera lens with icon on Standard Mount and attach mount.
2. Press mount against camera until it clicks. Pull away gently to ensure proper installation.
3. To remove the camera, press and hold buttons on both sides of the mount simultaneously.

Flexible Adhesive Mount:
Description: Flexible design with a strong adhesive base for flat, curved surfaces. Heat and humidity resistant.

How to Use:

1. Peel off red sticker from bottom of mount and clean base before use.
2. Stick to surface and press for 30 seconds.
3. Attach Standard Mount and tighten screw for stability. Then attach camera.

First Use

Insert the Battery:

1. Press and hold latch of Battery Cover, slide downwards, open cover outward.
2. Insert battery as indicated on the battery.
3. Close cover ensuring waterproofing is maintained.

Insert the MicroSD Card:

1. Press and hold latch of USB Port Cover, slide downwards.
2. Insert MicroSD Card in the indicated direction.

FAQ

• Can the adhesive base of the Flexible Adhesive Mount be reused?
  The adhesive base is one-time use only. It cannot be reused if detached from the surface.

• What surfaces are suitable for mounting the product?
  The product should be mounted on smooth, clean surfaces like glass, ceramic, plastic, painted surfaces, and metal. It should not be used with selfie sticks.

Product Introduction

Insta360 Ace Introduction

1. Indicator Light
2.  Front Screen
3. Shutter Button
4. Microphone
5. Lens
6. Quick Button
7. Power Button
8. USB Port Cover
9. USB Type-C Port
10. MicroSD Card Slot
11. Battery Cover
12. Battery
13. Release Switch
14. Indicator Light
15. Flip Touchscreen
16. Speaker
17. Mounting Latch

Standard Accessories

Insta360 Aceincludes two in-the-box accessories for flexible shooting wherever you go.

First Use

Insert the Battery

1. Press and hold the latch of the Battery Cover and slide it downwards.
2. When you see the yellow indication mark, open the cover outward.
3. Insert the battery in the direction indicated on the battery.
4. Close the cover and ensure the yellow indication mark is completely covered to ensure waterproofing is not affected.

Insert the MicroSD Card

1. Press and hold the latch of the USB Port Cover and slide it downwards.
2. Insert the MicroSD Card in the direction indicated on the card.

Note:
Please use exFAT format microSD cards of speed classes UHS-I and V30 or above to ensure normal recording. The maximum supported storage spInsta360 Aceis 1TB.

External Devices

1. Hold the protective cover of the camera’s MicroSD card slot against the protruding part of the cover in the direction shown in the illustration, and pull out the cover completely in the direction indicated by the arrow;
2. Open the cover outward and pull it out firmly;
3. After pulling out the cover, you can insert the flash companion and audio adapter;
4. After use, align the inner notch on the top of the protective cover with the silver metal snap above the slot compartment.

Charging
Open the camera’s USB Port Cover. Use the Type-A to Type-C charging cable included in the box to connect the Type-C port of Insta360 Aceto a Type-A charger.

Insta360 Ace Charging Time:
70 minutes – 100%
The Indicator Lights will be solid red when charging and will turn off once the battery is fully charged.

Activation
You need to activate Insta360 Acein the app before using it for the first time. Steps:

1. Download the app. Alternatively, search “Insta360” in any major app store or scan the QR code on the box.
2. Press the Power Button to turn on Ace.
3. Enable Wi-Fi and Bluetooth on your smartphone.
4. Open the app and click the camera at the bottom of the page. Select the device you want to connect to in the pop-up window, then follow the on-screen instructions to complete the connection. The name of your camera is “Insta360 Ace**” by default, where ** is the last six digits of the serial number on the box your Insta360 Acecame in. The first time you connect to Ace, you will need to confirm the connection on the touchscreen.
5. After successfully connecting the camera, follow the on-screen instructions to activate your camera. The app will prompt you to update the firmware if a new version is available. Please follow the on-screen prompts to update the firmware of Ace.

Basic Use

Button Instructions

Power Button

•            5 seconds: Force shutdown.

Shutter Button

*This function must be enabled in the camera first.

Powered on| Press once| •            During Preview:

￮       Take a photo or start recording a video.

￮       Stop recording.

•            In other pages:

￮       Return to the preview page.

Long press| •            During recording：

￮       Quickly cancel recording.

Quick Button

switch shooting modes.Press again to switch between different modes or presets.

•            When recording, press to mark clips as important. You can find then find marked clips quicker when you are editing.

Release Switch

Change the angle of the touchscreen.

Using the Screen

Front Screen
Once the camera is turned on, the front screen will display the following information:

shooting mode.
Shooting| Shooting status i.e., paused, pre-recording, countdown, etc.
Other| Footage saving, connecting to app, firmware upgrade, etc.

Flip Touchscreen
The touchscreen’s main display shows the current camera shooting mode. The menu bar shows battery level, storage capacity, and current shooting parameters. By swiping or tapping the screen, you can achieve the following:

Shortcut Menu

1. Storage: Shows the remaining number of photos or the length of video footage that can be stored on the microSD card.
2. Battery Status: Current battery level of Ace.
3. Shooting Mode: Click the icon and swipe to select a different shooting mode.
4. Shooting Specifications: See the current shooting mode settings.
5. Field of View: Change the Field of View.

Shooting Mode
Click the icon and swipe or swipe left and right in the center of the screen to select a different shooting mode.

adjustable aspect ratio in post via the app or Studio.
Active HDR| Record stabilized high dynamic range video.
PureVideo| PureVideo improves image quality in low light environments.
TimeShift| TimeShift video can be used while moving to create a hyperlapse effect.
Timelapse| Suitable for shooting static timelapse videos.
Loop Recording| Record continuously and save only the last fixed-length segment.
Slow Motion| Shoot Slow Motion video with a high frame rate.
Starlapse| Shoot and store multiple photos and automatically combine Starlapse effects.
Burst Photos| Take multiple photos in a short spInsta360 Aceof time.
Interval| The camera automatically takes continuous photos at a specific time interval.
HDR Photo| For high dynamic range photos. Please keep the camera still while shooting.
Photo| Take a single photo.

Camera Settings
Swipe down on the touchscreen to view the camera settings.

1. Prompt Sound: Set the camera speaker volume. There are four options: High, Medium, Low, and Mute.
2. Indicator Light： Turn on/off.
3. Grid: Turn on/off.
4. Audio: Switch audio mode. Choose between Stereo, Wind Reduction or Direction Focus.
5. Timed Capture: Use the Timed Capture function.
6. Bluetooth Remote: Search for and connect a Bluetooth remote.
7. AirPods: Search for and connect AirPods.
8. Settings: See camera settings.
9. QuickCapture: Turn on/off. Once enabled, press the Shutter Button when the camera is powered off to turn it on and start recording.
10. Rotation Lock : Turn on/off.
11. Gesture Control : Turn on/off.
12. Voice Control: Turn on/off.
13. Pre-recording : Turn on/off. Save 15 or 30 seconds of footage before you start recording.
14. AI Highlights Assistant: Turn on/off. The camera finds the best moments from a single video and shows you the highlights to review. Merge them into one video or save each of them as new files. View them on the Album page.
15. Adjust Brightness: Slide the bar to adjust the screen brightness.
16. Lock Screen: Tap to lock screen. Swipe up on the touchscreen to unlock.

Shooting Specification Settings
Swipe up from the bottom of the touchscreen to view shooting specification settings.

Shooting Parameter Settings
Swipe left from the right edge of the touchscreen to see the shooting parameter settings.

shutter speed, the clearer the image.
Sensitivity (ISO)| Reflects how sensitive the sensor is to light. A higher sensitivity means the camera can capture more light for a brighter image.
Exposure Compensation Value (EV)| In Auto Mode, you can adjust the EV to help with overexposure or underexposure.
White Balance (WB)| Removes unrealistic colors and tones so colors are accurately captured in the image.
Low Light Stabilization| Improves motion blur and stabilization in low light environments. In extreme environments, the image will be darker and may have some flickering.
Filter| Add different color tones and effects.
FInsta360 AcePriority| Prioritizes the fInsta360 Acefor brightness.
Shooting Mode| Parameters
---|---
Auto| Manual
Video| Filters, EV, FInsta360 AcePriority, Low Light Stabilization, WB| Filters, Shutter, ISO, EV, WB
FreeFrame Video| Filters, EV, FInsta360 AcePriority, Low Light Stabilization, WB| Filters, Shutter, ISO, EV, WB
PureVideo| EV, Low Light Stabilization, WB| Shutter, ISO, EV, WB
Active HDR| FInsta360 AcePriority, Low Light Stabilization, WB| FInsta360 AcePriority, Low Light Stabilization, WB
TimeShift| Filters, EV, WB| Filters, Shutter, ISO, EV, WB
Timelapse| Filters, EV, WB| Filters, Shutter, ISO, EV, WB
Loop Recording| Filters, EV, FInsta360 AcePriority, Low Light Stabilization, WB| Filters, Shutter, ISO, EV, WB
Slow Motion| Filters, EV, WB| Filters, Shutter, ISO, EV, WB
Starlapse| Filters, Shutter, ISO, WB, EV| Shutter, ISO, EV, WB
Burst Photo| Filters, EV, WB| Filters, Shutter, ISO, EV, WB
Interval| Filters, EV, WB| Filters, Shutter, ISO, EV, WB
HDR Photo| FInsta360 AcePriority, WB| FInsta360 AcePriority, WB
Photo| Filters, EV, FInsta360 AcePriority, WB| Filters, Shutter, ISO, EV, WB

Album Page
Swipe right from the left of the touchscreen to enter the Album page.

Indicator Lights
Insta360 Acehas two LED Indicator Lights, one on the front of the camera and one on the back. Both display the same information. You can turn the Indicator Lights on/off in Settings > General.

Low battery/temperature is too high and camera will start auto shutdown countdown| Continuously flashing yellow
Camera Status| Indicator Light Status
Powered on| Solid cyan

File Storage
Please use exFAT format microSD cards of speed classes UHS-I and V30 or above to ensure normal recording. The maximum supported storage spInsta360 Aceis 1TB.
We recommend using the official memory card available on the Insta360 Store. If you wish to use another memory card, the following have also been tested to be compatible with Ace:

Exclusive Features

Gesture Control
You can control the camera with gestures, perfect for group selfies or noisy environments. Enable Gesture Control on your camera, then give the sign to start/stop recording or take a photo. Swipe down on the touchscreen and turn on Gesture Control.

Cancel Recording
In camera settings, turn on Cancel Recording. You can then long press the Shutter Button to instantly cancel the current recording and start again.

Pause Recording
Pause and resume recording in the same file. There are three ways to use this feature:

recording for the first time.

To resume or pause your recording again, tap the button or press the Shutter Button once.

Click the red button at the bottom right of the screen to save your footage to the camera’s album.

Turning off (while video recording is paused)| You can continue to record in the same file the next time you turn on the camera.

Tap the red button at the bottom of the screen and turn off your camera. Turn the camera back on and continue to record/pause recording in the same way as normal.

Click the red button at the bottom right corner to save your clip to an album.

On Album Page| Click the red button in the lower right corner of the album to continue recording in that file.

Photo Grab

• Take a high quality photo even when you’re recording a video in 4K60fps or below in Video and FreeFrame Video mode. All parameters are supported.
• Tap the circle button in the bottom left corner to take a HD photo whilst recording.
• After recording, the video and photo will both be saved.

Auto Dash

• In camera settings, tap “Power Off Charging Settings” and choose”Charge and Record”. You can adjust the shooting settings and mode here. When the camera is connected to an external power source, it will automatically power on and start shooting in the set shooting mode and parameters.
• This function is ideal for cars or motorcycles as it acts as a dashcam.
• Once the camera is disconnected from the power source, the camera will automatically stop recording, save the file and start counting down to power off.

AI Warp
Add a dynamic twist to your videos with AI Warp. Search for a filter in the app and apply premium AI effects to the whole clip or specific parts.

AI Selfie Stick Eraser
Choose the AI Selfie Stick Eraser effect in Shot Lab for epic third-person perspectives. If you have used the selfie stick in your video, AI will automatically detect and remove it from your clips.

Motion ND
By adding Motion ND directly to the image in the app, you can create visual blockbusters with a cinematic sense of speed even without an ND filter. Ideal for shots in the forward direction while riding or driving.

AI Highlights Assistant

You can use this feature on the camera or in the app.

In-Camera:

• Swipe down from the top of the touchscreen and enable AI Highlights Assistant.
• Go to the Album Page to view the footage after recording.
• AI will automatically analyze a single video and show you the highlights to review.
• Choose the highlight clips and save them separately or merge them into one video.
• You can then delete the rest to quickly free up storage space.

In the app:

• Once the camera is connected to the app, go to the album page and open your clip. Pause the video and you can see your highlights in the ‘Highlights’ section.
• You can edit the clip duration and choose the highlights you want to export, or make more clips. In addition, AI will automatically create and edit a highlight reel for you.
• You can also view them in the new Memories section of the app.

app Background Downloading

• You can now download your clips to the app as it runs in the background.
• As they download, you can exit the app and keep using your phone until they’re ready.
• The app will notify you once the download is complete.

GPS Preview Remote

Preview your footage in real-time and adjust camera settings with the GPS Preview Remote. Record precise GPS information and other data to add to your footage in post.

Overview

Charging

1. Put the remote on the charging base, ensuring that the charging points are in full contact.

2. Then, connect the charging base to the charger and the power supply. An indicator will appear on the touch screen to confirm the remote is charging.
   Note:

   • Please use a 5V/1.5A power adapter to charge the Remote.
   • Keep the remote and the charging base clean and dry.

Install
You can attach the GPS Preview Remote in three ways. It has two straps for flexible mounting.

How to Use

Power on/off

off the remote.
Powered on (camera connected)| Long press Power Button| •            Power the remote/the camera/both (you can select this function).

Connecting the Camera

1. Long press the Power Button to turn on the remote.
2. Power on the camera.
3. Click “Insta360 GPS Preview Remote” on the camera’s Bluetooth Remote interface. When the camera’s screen displays Connected, it has been paired successfully.

Notes:

• For the best experience, update your camera’s firmware to the latest official version.
• The optimal range for live preview is up to 26.2ft (8m) and 65.6ft (20m) for remote control, measured in an open environment without interference.
• Please pay attention to the Insta360 official website for future camera compatibility and firmware updates.
• After connecting to the remote for the first time, the device can wake up the camera within range without pairing.

Connecting Multiple Cameras
Swipe down from the top of the remote’s watch dial to enter the connecting interfInsta360 Aceand tap the camera button.The remote will be ready to pair. Enter the Bluetooth Remote feature on your camera and connect to the remote. Repeat the process as needed.
Notes:

• The remote can control up to four cameras at a time. Each camera only recognizes one remote at a time.
• The remote will only show the number of connected cameras and no other camera information.

Wake up a Camera
You can use the remote to wake up your camera. After connecting to the camera for the first time, swipe down on the remote touchscreen to enter the connection interface, and choose one of the following two ways to wake up the camera:

• Connect: Wake up the last connected camera. The camera will automatically connect to the remote once powered on.
• QuickCapture: Wake up the last connected camera. The camera will automatically connect to the remote and enter QuickCapture.

Notes:

• Enable “Bluetooth Wakeup” on the camera to use this feature.
• The feature must be set on the camera before waking up, even if the remote is connected.
• To use QuickCapture, make sure it is enabled on your camera.
• Press the remote’s Shutter Button once to enter QuickCapture. Long press the Shutter Button to connect to the camera.

Control the Camera
When the camera is connected, use the remote’s touchscreen or press its buttons to control the camera.

Preview Page
When the camera is connected, the remote will display the following camera information on the preview page:

1. Camera Storage
2. GPS Signal
3. Camera Battery Status
4. Preview Page
5. Shooting Mode
6. Shooting Specifications

Switch Shooting Modes

• Touchscreen: Swipe left or right on preview page to switch shooting mode.
• Power Button: Press repeatedly to switch shooting modes.

Shooting Specifications
On the preview page, tap the shooting specifications button or swipe from the bottom upwards to enter and adjust shooting specifications.

Shooting Parameters
On the preview page, swipe right to left to enter and adjust shooting parameters.

Take Photos or Videos

recording a video.
Recording| Press the Shutter Button| •            Stop recording.

application Center

Dashboard and Compass
Swipe left or right on the remote’s watch dial screen to enter Dashboard, Compass or Settings.

Settings
You will find the following in Settings: Display and Brightness, Direction of Display, Sound, Time, Language, About and Factory Data Reset.

Firmware Update
Open the app > Settings > Update GPS Remote Control. Search and connect to the remote. Once connected, the app will prompt you to update if there is a new firmware version. Please follow the on-screen instructions to update the remote’s firmware.

File Transfer

Connect Insta360 Aceto a mobile phone or computer with the included Type-C cable for file transfer. You can download Ace’s files to your phone or PC, then use the app or Insta360 Studio to edit and export.

Download files from Insta360 Aceto the app

1. Connect Insta360 Aceto your phone via the app.
2. Enter the Album page, then select Camera.
3. Tap the multi-select icon in the upper right corner of the page and select the files you want to download. Tap the download icon in the bottom right corner to download. You can use other apps or lock your phone as you wait for footage to download to the app.

Download files from Insta360 Aceto your computer

1. Connect Insta360 Aceto your PC via the official cable.
2. Open the DCIM > Camera01 folder, then copy the photos/videos you want to your PC.

Transfer files between the app and your Windows computer

iPhone

1. Install iTunes on your PC. Connect your iPhone to your PC, open iTunes, then complete the authorization process according to the instructions.
2. After successful authorization, click the iPhone icon in the top left corner, and the iPhone’s files will appear.
3. Click “File Sharing” and choose “Insta360” from the list. Then do one of the following:
   • Transfer from iPhone to Windows PC: Find the DCIM folder, then click Save. Choose your desired path and click Save.
   • Transfer from Windows PC to iPhone: Create a new folder and name it IMPORT, then copy the photos/videos to the IMPORT folder. ReplInsta360 Acethe IMPORT folder in the app.

Android

1. Connect your Android phone to your PC, then choose “Manage Files” under “USB Connected” on the phone.
2. Click “My Computer/This Computer”, find your phone model, and click “Internal Storage”.
3. Find “/Android/data/com.arashivision.insta360akiko > files > Insta360OneR > galleryOriginal”, then do one of the following:
   • Transfer from Android to Windows PC: Copy the folder or files to your PC.
   • Transfer from Windows PC to Android: Copy files to this folder from your PC.

Transfer files between the app and your Mac

iPhone

1. Connect iPhone to your Mac.
2. In the Finder window on your Mac, select your iPhone.
3. At the top of the Finder window, click Files, then do one of the following:
   • Transfer from Mac to iPhone: Drag a file or a selection of files from your Mac onto the app in the list.
   • Transfer from iPhone to Mac: Click the small triangle beside the app to see its files on your iPhone, then drag the desired files to a folder on your Mac.

Android

1. Install Android File Transfer on your Mac.
2. Connect your Android phone to Mac.
3. Open Android File Transfer.
4. Browse the files and folders on your Android device, then copy and paste them to a folder on your Mac.

Insta360 App

Connect to the app

1. Download the app . Alternatively, search “Insta360” in any major app store or scan the QR code on the box.

2. Press the Power Button to turn on Ace.

3. Enable Wi-Fi and Bluetooth on your smartphone.

4. Open the app and click the camera icon at the bottom of the page. Follow the on-screen instructions to activate your camera.

5. If you connect to the app for the first time, you need to authorize the connection on the touchscreen.
   If you are unable to connect to the app, go to your smartphone’s Wi-Fi settings, find your Ace, enter the password and return to the app.
   Note: You can change the camera’s Wi-Fi password on the app settings page.

Still can’t connect to the app?

1. Check if the app has permission to access the following: network permission, Bluetooth permission, or local network permission.
2.  Check if the Wi-Fi option is enabled and turned on on your camera.
3. Make sure Insta360 Aceis close enough to the phone.

Android Mode

1. Connect Insta360 Aceto your Android phone with the USB-C cable.
2. A notification for Android Mode will pop up.
3. Open the app to control the camera and access the camera’s footage.

App Interface
Enter the shooting interfInsta360 Aceof the app and you will see the following icon functions. Some of the icon functions are only available in some shooting modes.

Stats Dashboard(With Garmin/Apple Watch)

• The Stats Dashboard feature supports adding real-time stats such as speed, elevation, direction, cumulative distance, incline, and motion trajectory to your video when you export.
• The Stats Dashboard does not support the following shooting modes: Timelapse, Starlapse, Dynamic Timelapse, Slow Motion, and Bullet Time.
• You can also integrate data from your Garmin Device or Apple Watch.

Garmin Device

How to connect:

1. Connect the camera to the Insta360 app, open a video on the album page of the app, pause the playback and click “Stats” in the lower menu.
2. Select “Garmin Connect” as the data source.
3. If you have not yet registered/logged into the Insta360 app, you will need to complete your account registration/login.
4. Log in to your Garmin account and agree to authorize the Insta360 app;
5. Garmin data will be automatically synchronized to the Insta360 app.

Notes:

• For accurate timecodes between the GPS data and the video, it is recommended to connect the camera to the Insta360 app before recording to obtain the accurate timecode from your phone.
• Garmin Device Compatibility: Insta360 Insta360 Ace supports any Garmin device that shares data with Garmin Connect, including cycling odometers and smartwatches.
• You must upload data from your Garmin device to your Garmin Connect before the data can be synchronized to the Insta360 app.
• You can switch data sources by clicking the icon on the dashboard page.
• Data can be synced to multiple devices that are logged into the Insta360 app.

Apple Watch

How to connect:

1. Connect the camera to the Insta360 app, open a video on the album page of the app, pause the playback and click “Stats” in the lower menu.
2. Select “Apple Health” as the data source.
3. If you have not yet registered/logged in to the Insta360 app, you need to complete the registration/login first.
4. Authorize the Insta360 app;
5. Apple Health data will be automatically synchronized to the Insta360 app.

Notes:

• The Insta360 app does not support Apple Health on Android devices.
• For accurate timecodes between the GPS data and the video, it is recommended to connect the camera to the Insta360 app before shooting to obtain the accurate timecode from your phone.
• Before recording, you need to start a workout on your Apple Watch and save it to record your exercise data and GPS information. You can also manually add a workout in the Apple Health app to synchronize your data.
• You can switch between data sources by tapping the icon on the dashboard page.

Gyro Data and Gyroflow Stabilization
Insta360 Acecan import gyroscope data from Gyroflow for footage recorded in FreeFrame Mode, making your shots even more stable.

How to use:

1. Record in FreeFrame Video.
2. Download the latest version of Gyroflow from the official website, then import the FreeFrame footage shot to preview the stabilization effect.
3. You can adjust the FOV, stabilization smoothing, resolution and other parameters according to your preferences, then export the video.

Maintenance

Firmware Update

• Firmware updates will be regularly available for Insta360 Aceto ensure it runs efficiently. Please update to the latest version for optimal results.
• Before updating, ensure Insta360 Acehas at least 20% battery remaining.

Update via app:
Connect Insta360 Aceto the app. The app will notify you if there is a new firmware update available. Follow the on-screen instructions to update the firmware.

If the camera firmware update fails, check the following and try the update again:

1. Ensure the camera is close to your phone.
2. Keep the app running and do not exit or minimize it.
3. Ensure your phone has a strong and stable network connection.

Update via Computer

1. Make sure Insta360 Aceis powered on.

2. Connect the camera to the computer using the USB Type-C cable and select USB Mode.

3. Download the latest firmware version from the official Insta360 website on your computer.

4. Once the computer has recognized Ace, copy the “Insta360AceFW.bin” file to Ace’s root directory.
   Note: Do not change the file name.

5. Disconnect Insta360 Acefrom the computer. Insta360 Acewill automatically power off. The Indicator Lights will slowly flash blue.

6. Insta360 Acewill automatically restart once the update is complete.

Waterproofing

1. Insta360 Insta360 Acecamera is waterproof up to 33ft (10m) without a Dive Case. For extended underwater use, use the Dive Case. The Dive Case is waterproof to 96ft (60m).
2. Check that the battery compartment is free from dirt or foreign objects. Once the battery is inserted, close the Battery Cover and ensure the yellow indication mark is completely covered to ensure waterproofing is not affected.
3. Ensure the USB Port Cover is free from dirt or foreign objects. Ensure it is completely closed before using the camera underwater.
4. After every use in seawater, soak the camera in fresh water for 15 minutes, gently rinse it with the flip screen open, and then dry it thoroughly with a soft cloth. Wait until it is completely dry before using it again.

To maintain the waterproofing of Ace:

• Do not use a hair dryer to dry the camera, as it may affect the microphone and speaker and damage the internal waterproofing ability.
• Avoid operating the camera for extended periods (>1 hour) outside the recommended temperature range (-4°F to 104°F/-20℃ to 40℃) or in humid environments.
• Do not store the camera in high-temperature or high-humidity environments.
• Do not disassemble the camera.
• Avoid entering water at high speeds. Excessive water impact may damage the device.
• Ensure the camera’s Battery Cover, USB Port Cover and Lens Cover are installed and securely closed, or the camera will not be waterproof.

Cleaning

1. If there are foreign objects, such as dirt or hair, on the Lens Cover, clean it with clean water or use a lens pen, air blower or cloth.
2. If there are foreign objects, such as dirt or hair, on the lens, use a lens pen, air blower or cloth to clean it.
3. Ensure the Battery and Battery Cover is free of dirt and foreign objects like sand or hair. Clean it with a soft, dry cloth or paper if necessary.
4. Ensure the MicroSD Card Slot is free of dust, dirt and sand to ensure the camera works properly.

Battery Precautions

• Only use batteries provided by Insta360 designed for Ace. Insta360 is not responsible for any accidents or failures that occur by using unofficial batteries. If you need to replInsta360 Acethe battery, please purchase it from the Insta360 official store.
• Avoid using the battery outside the recommended temperature range (-4°F to 104°F/-20℃ to 40℃). Temperatures outside of this may cause the battery to expand, catch fire or even explode. Before using the camera in a low-temperature environment, fully charge the battery in a regular- temperature environment first to extend the battery life.
• If the battery is not used for a long time, its performance will be affected.
• Recharge and discharge the battery every three months to maintain optimal working conditions.

ABOUT COMPANY

• Arashi Vision Inc.
• ADD: 11th Floor, Building 2, Jinlitong Financial Center, Bao’an District, Shenzhen, Guangdong, China
• WEB: www.insta360.com
• TEL: 400-833-4360 +1 800 6920 360
• EMAIL: service@insta360.com
• V1.0

References

• Insta360 | Action Cameras | 360 Cameras | VR Cameras

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>