Insta360 Invisible Drone 360 Camera for DJI Mavic AIR 2 Instruction Manual

June 3, 2024
Insta360

Insta360 Invisible Drone 360 Camera for DJI Mavic AIR 2

Insta360 Invisible Drone 360 Camera for DJI Mavic AIR
2-fig1

Important: Only suitable for experienced and highly skilled drone pilots

* Disclaimer

  • This product is not a toy and should be used with extreme care and caution under controlled conditions. It should not be operated by people under 18 years of age, and it is not recommended for use when children are nearby.
  • Please read this disclaimer carefully. Using the product and its relevant accessories means that you acknowledge and accept the terms of this disclaimer.
  • By using this product, you hereby acknowledge and agree that you are solely responsible for your own conduct when using this product and any consequences thereof. You agree to use this product only for proper and lawful purposes.
  • You understand and agree that Arashi Vision Inc. (hereinafter referred to as ‘Insta360’) accepts no liability for any and all misuse, consequences, damages, injuries, penalties, or any other legal responsibility directly or indirectly incurred by your using this product and associated accessories. Before every use, make sure that your product and accessories are functioning properly. If there’s any damage or irregularity, stop using them immediately.
  • Within the scope of state laws and regulations, Insta360 reserves the right of final explanation and revision for the commitment.

What’s Included

Open the package and verify you have the following items:

  • Invisible Drone 360 Camera * 1
  • Sticky Lens Guard * 2
  • Lens Cap * 2
  • Battery * 1
  • Charge Cable * 1
  • Lens Cloth & User Manual

Names of Parts

Insta360 Invisible Drone 360 Camera for DJI Mavic AIR
2-fig2

  • Flashing red: recording. Solid cyan: standby. Flashing blue: no SD card or SD card error.

Notes

  1. The Invisible Drone 360 Camera is not water resistant. Do not use the camera in or around water, including in the rain.
  2. This product is only suitable for experienced and highly skilled drone pilots. Users are fully responsible for the risk of using this accessory during drone operation (unless risks are caused by a product defect).
  3. Be sure to take off in an open outdoor area, and keep the distance between pilot and drone above 5 meters (16.4 feet) and within 10 meters (32.8 feet). Do not use your hand as a take-off or landing platform.
  4. To ensure flight safety, please keep the drone within visual distance, staying away from obstacles, crowds and bodies of water. For detailed flying guidance, please strictly follow official operation guidelines and instructional materials from the drone manufacturer.
  5. Check that all parts are firmly connected before use.
  6. Check the drone’s blades before flight. The appearance should not be noticeably worn.
  7. Only fly at an altitude of 1000 meters above sea level or below. High altitude environments will reduce the power redundancy and safety of the aircraft.
  8. Do not fly in harsh or unpredictable environments. Do not fly on windy days. Do not fly in extremely cold environments, or the battery may be damaged irreversibly.
  9. As the Invisible Drone 360 Camera records video in all directions at once, users do not need to adjust the orientation of the drone to control the filming angle. To be safe, the user should be facing the drone’s tail when controlling it.

Before You Fly

  1. Before use, open the battery door ( ① ) and insert the battery ( ② ). Please charge the Invisible Drone 360 Camera via the included Charge Cable in case of low or depleted battery.

  2. Before use, insert a MicroSD card.

Insta360 Invisible Drone 360 Camera for DJI Mavic AIR
2-fig4
Note:
Please use exFAT formatted microSD cards with the UHS-I bus interface and Video Speed Class V30 rating to ensure normal recording. The maximum supported storage space is 1TB.

  1. Before use, stick the double-sided adhesive to the inner side of the Sticky Lens Guard, then stick the Sticky Lens Guards (with the double-sided adhesive) onto the lens.

Insta360 Invisible Drone 360 Camera for DJI Mavic AIR
2-fig5

Assemble

  • Step 1: Open the Lock Lever to open the mounting bracket.

Insta360 Invisible Drone 360 Camera for DJI Mavic AIR
2-fig6

  • Step 2: As shown below, lock the mounting bracket’s connection buckle onto the bottom of the drone.

Insta360 Invisible Drone 360 Camera for DJI Mavic AIR
2-fig7
Insta360 Invisible Drone 360 Camera for DJI Mavic AIR
2-fig8

  • Step 3: Lock the Lock Lever well and ensure that the yellow mark of the Lock Lever is not showing.

Insta360 Invisible Drone 360 Camera for DJI Mavic AIR
2-fig9
Insta360 Invisible Drone 360 Camera for DJI Mavic AIR
2-fig10

Button Instructions

Insta360 Invisible Drone 360 Camera for DJI Mavic AIR
2-fig11

Important:
When recording long videos, please wait until the flashing red light turns to a solid cyan light when stopping recording, otherwise a video saving error may occur.

Downloading the App & Setup

The Invisible Drone 360 Camera’s default shooting mode is 5.7K 30fps 360° video. If you need to adjust and set shooting modes and settings, please scan the QR code below (https://www.insta360.com/download) or search “Insta360” in the App Store/Google Play Store to download and connect to the Insta360 app.

Specs

  • Aperture: F2.0
  • 35mm Equivalent Focal Length: 7.2mm
  • Battery Capacity: 1050mAh
  • Charging Method: Type-C
  • Use Environment: -5℃ to 40℃ (23° F to 104° F)*
  • Dimensions: 110×125×63mm (4.33×4.92×2.48in)
  • Weight: 192g (battery included)
  • It’s not suggested to use the camera in low temperature environments, or the battery’s endurance performance may be reduced.

After-Sales Service

The warranty period of the attached product is 1 year from the original retail purchase. Warranty service may vary according to the applicable laws of your state or jurisdiction. For detailed warranty policies, please visit http://insta360.com/support

FCC Compliance Information

  • This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
    1. This device may not cause harmful interference.
    2. This device must accept any interference received, including interference that may cause undesired operation.
  • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information

  • This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.
  • This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
    NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

ABOUT COMPANY

  • Arashi Vision Inc.
  • Add: Foresea Life Center, Tower 2, 11F, 1100 Xingye Road, Haiwang Community,
  • Xin’an Street, Bao’an District, Shenzhen, China
  • Web: www.insta360.com
  • Tel : 400-833-4360 +1 800 6920 360
  • Email: [email protected]
  • Insta360 GmbH
  • Ernst-Augustin-Str. 1a, 12489 Berlin, Germany
  • +49 177 856 7813
  • [email protected]

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Insta360 User Manuals

Related Manuals