anko 406465 Rechargable Fabric Shaver Instruction Manual

anko 406465 Rechargable Fabric Shaver

Specifications

• Model Number: 406465
• Dimensions: 105mm x 155mm
• Power Source: Rechargeable

Product Information
The Rechargeable Fabric Shaver Model no. 406465 is designed to remove lint, fuzz, and pills from various fabric surfaces, keeping your clothes and fabrics looking fresh and new. The product includes parts such as a cap, screw cap, stainless steel mesh board, blade, on/off switch, rotation handle, Type C cable, and cleaning brush for easy maintenance.

Dimensions

• Height: 16.4cm
• Width: 8.5cm
• Length: 8.5cm
• Power Details
• 5V 1A
• Ta: 25°C
• Protection Class: III
• Rechargeable Battery
• 3.7V 1200mAh 18650 li-
• battery

Description

1. Cap
2. Screw Cap
3. Stainless Steel
4. Mesh Board
5. Blade
6. On/Off Switch
7. Rotation Handle
8. Type C cable
9. Cleaning Brush

Warnings and Safety Instructions:
Always ensure the device is disconnected from the power source before cleaning or performing maintenance on the inner parts of the fabric shaver.

WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED:

• IT MUST ONLY BE SUPPLIED AT SAFETY EXTRA LOW VOLTAGE CORRESPONDING TO THE MARKING ON THE APPLIANCE .
• WARNING: KEEP THE APPLIANCE DRY
• READ ALL INSTRUCTIONS BEFORE USE.
• FOR DOMESTIC INDOOR USE ONLY.
• DO NOT USE OUTDOORS OR FOR COMMERCIAL USE.
• THIS APPLIANCE CONTAINS BATTERIES THAT ARE NON-REPLACEABLE.
• FOR CHARGING, REFER TO THE PREPARATIONS FOR USE SECTION.
• BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE FOUND. TAKE CARE NOT TO DROP THE APPLIANCE AS HEAVY IMPACTS MAY CAUSE INTERNAL DAMAGE.
• BEFORE CONNECTING THE APPLIANCE, CHECK IF THE VOLTAGE INDICATED ON THE BOTTOM OF THE APPLIANCE IS IN ACCORDANCE WITH THE MAINS VOLTAGE IN YOUR HOME.
• CHECK THE APPLIANCE AND POWER CABLE CAREFULLY FOR DAMAGE BEFORE EACH USE.
• THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES, OR LACK OF EXPERIENCE AND KNOWLEDGE, UNLESS THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING THE USE OF THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR SAFETY.
• CHILDREN SHALL NOT PLAY WITH THE APPLIANCE.
• SOME PARTS OF THIS PRODUCT CAN BECOME VERY HOT AND CAUSE BURNS. PARTICULAR ATTENTION HAS TO BE GIVEN WHERE CHILDREN AND VULNERABLE PEOPLE ARE PRESENT.
• THE USE OF ANY ACCESSORY ATTACHMENTS NOT RECOMMENDED MAY CAUSE INJURIES AND INVALIDATE ANY WARRANTY YOU MAY HAVE.
• DO NOT LET THE POWER CABLE HANG OVER THE EDGE OF A TABLE OR COUNTER, OR TOUCH HOT SURFACES.
• DO NOT PLACE ON OR NEAR HEAT SOURCES.
• USE ON A LEVEL, STABLE SURFACE.
• DO NOT COVER THE ITEM IN ANY WAY WHEN IN USE AS THIS MAY CAUSE OVERHEATING.
• DO NOT USE THIS APPLIANCE FOR ANY OTHER USE THAN THE INTENDED USE IT IS DESIGNED FOR.
• ENSURE THERE IS SUFFICIENT DISTANCE BETWEEN THIS APPLIANCE AND OTHER ITEMS ON THE WORK SURFACE OR WORK STATION, OR SUFFICIENT DISTANCE BETWEEN THE APPLIANCE AND THE CONFINES OF THE AREA IN WHICH IT IS SITUATED. WE RECOMMEND A MINIMUM CLEARANCE AROUND ALL FACES OF AT LEAST 10CM.
• TO PROTECT AGAINST ELECTRIC SHOCK, DO NOT IMMERSE POWER CABLE, PLUG OR APPLIANCE, IN WATER OR ANY OTHER LIQUID.
• UNPLUG FROM OUTLET WHEN NOT IN USE AND BEFORE CLEANING.
• DO NOT OPERATE ANY APPLIANCE WITH A DAMAGED POWER CABLE OR PLUG OR AFTER THE APPLIANCE
  • MALFUNCTIONS, OR HAS BEEN DAMAGED IN ANY MANNER. WE RECOMMEND THAT THE POWER CABLE IS
  • NOT KINKED OR STORED IN A TWISTED MANNER, AND THAT YOU REGULARLY CHECK ITS CONDITION.
• ANY REPAIRS MUST BE CONDUCTED BY A QUALIFIED ELECTRICIAN OR ELECTRICAL SERVICE AGENT.

Care and Cleaning:
Regularly clean the blade and mesh board using the provided cleaning brush to maintain optimal performance.

• Use a damp cloth to wipe the surface of your fabric shaver. Do not allow water or other liquid to enter the inner parts of this device.
• To clean the shaving head or blades, switch off and unplug your fabric shaver. Unscrew the shaving head and use the cleaning brush provided to remove any bobbles or lint pieces then screw the shaving head back on. Blades are sharp so please use cau?on.
• If the screen cover is loose or open when the power is on the motor will shut down.

Warnings

• Use this fabric shaver only as recommended in this manual.
• Use this fabric shaver on fabric only; it is not to be used on skin, hair or any other material.
• This fabric shaver is equipped with a sharp cung blade, do not leave it una-ended.
• Tuck in any loose threads before shaving.
• Do not use this fabric shaver on delicate easily damaged fabrics. If unsure test the fabric’s suitability on an unexposed area first.
• Do not use it when it’s charged.

Preparations for Use:
Before using the fabric shaver, ensure it is fully charged using the Type C cable provided. Make sure to remove any protective coverings from the blade before operation.

• Plug the small end of the USB cable into the port located at the end of the handle. Charge only with the supplied USB cable.
• Ensure the charging adapter used is compatible with a 5V 1A.
• Charging time: 6-8 hours, the charging indicator will be red while the fabric shaver is charging and will change to green when fully charged.
• No loading working time: Approx. 2 hours in green light. If the power is less than 10%, blinking red light.
• Take off the guard cap before using it.
• Place fabric on a flat surface such as an ironing board and pull it as straight as possible.
• Tuck in any loose threads before shaving and test the fabric’s suitability on an unexposed area first.
• Gently glide the shaving head over the fabric in an up and down motion.
• Do not press down heavily in order to prevent possible damage to the fabric.
• Rotation the handle for comfortable using.
• Empty the fabric shaver after each use.

Troubleshooting:

Charge the appliance as guided

FAQ

Where can I contact for Kmart purchases?
Kmart Australia Ltd. C/- Customer Service Centre 690 Springvale Road, Mulgrave Vic 3170 Customer Service: 1800 124 125 (Australia) or 0800 945 995 (New Zealand).

Where can I contact for Target purchases?
Target Australia Pty Ltd C/- Customer Service Centre 2 Kendall Street, Williams Landing, Vic, 3027 Custome r Service: 1300 753 567.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>