xo poppy PYTYPKBMS Wireless Keyboard and Mouse User Guide
- June 23, 2024
- xo poppy
Table of Contents
xo poppy PYTYPKBMS Wireless Keyboard and Mouse
PRODUCT SPECIFICATIONS
- Transmission Mode: 2.4g
- Port Usb
- Battery Requirement: 2 X Aaa (Not Included)
- Keycaps: 75 Keys
- Size: 30.5cm W X 15.7 cm H X 3.5cm D
- FCC Id: 2BBPLPYTYPKBMS
KEYBOARD SETUP
- Remove the battery cover at the rear, topside of the keyboard.
- Insert 2 x aaa batteries and place cover back on.
- Insert the usb receiver (found in the packaging, underneath the keyboard) into your computer/device.
- The keyboard will automatically install and begin working.
To ensure a strong connection between the usb receiver and the wireless keyboard, keep them within 50cm distance from one another.
AUTO SLEEP FUNCTION
If the keyboard is not in use for 15 minutes, it will automatically begin sleep mode to save energy. To re-engage, press any key.
MOUSE SETUP
FCC Id: 2BBPLPYTYPKBMS2
- Connect the mouse to the computer via the USB port.
- Insert two AAA batteries.
SETUP PROCEDURE
-
Ensure that your device has a battery and is charged.
Locate the USB port on the back or side panel of your computer, then connect the mouse to it. -
After connecting the mouse, the operating system should automatically detect and install the appropriate driver. If you have an internet connection available, this process will be quicker and more efficient.
PRODUCT DISPOSAL
Where you see either symbol on any of our electrical products, batteries or packaging, it indicates that the relevant electrical product or battery should not be disposed of as general household waste in europe. To ensure the correct waste treatment of the product and batteries, please dispose of them in accordance with any electrical equipment/batteries. By disposing of batteries and electrical waste correctly, you will help to conserve natural resources and improve standards of environmental protection.
XO POPPY© COPYRIGHT ALL RIGHTS RESERVED. XO Poppy is an innovative brand of Truststone Group LLC. No portion of this design may be reproduced without express written permission. Other trademarks and trade names are those of their respective owners. All rights reserved.
Distributed by Truststone Group LLC. New York, NY10018
MADE IN CHINA
FCC STATEMENT
Changes or modifications not approved by the party responsible for compliance
could void the user’s authority to operate equipment.
This device complies with part 15 of the fee rules. Operation is subject to
the following two conditions: (1) this device may not cause undesired
operation, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fee rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connected the equipment into an outlet on a circuit different from which the receiver is connected to.
- Consult the dealer or an experienced radio/tv technician for help.
WIRELESS KEYBOARD & MOUSE
Model: PY-TYPKBMS
FCC ID:2BBPLPYTYPKBMS
Rating: 3.0 V /≤5mA
2.4 GHZ Wireless Keyboard
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation
MADE IN CHINA
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>