veho MZ-9 Bluetooth Wireless Speaker User Manual
- June 23, 2024
- veho
Table of Contents
veho MZ-9 Bluetooth Wireless Speaker
Multi-lingual manual download
veho-world.com/downloads
Hello
IMPORTANT! How to get the most out of your speaker To prolong the life of
your MZ-9 speaker the battery should be fully discharged and recharged every
few months. Leaving the battery for long periods without use could reduce
battery efficiency until it no longer holds a charge. Always charge the
speaker with the supplied cable and a compatible power source, failure to do
so could invalidate the warranty.
Charging
Charging the MZ-9 We recommend fully charging the speaker before using it for the first time. While charging, the power LED indicator light will flash white, turning solid when fully charged.
Controls
- Previous track (-)
- Bass boost
- Power / Play / Pause
- Volume dial
- Power LED indicator
- TWS pairing
- Light mode
- Next track (+)
- AUX jack (3.5mm)
- USB-A drive port
- TF card port
- USB-C port
- Reset button
Pairing
Pairing with a device Power on the speaker by pressing and holding the power button for 3 seconds, the speakers will automatically enter into pairing mode. Next, on your device, select ‘Veho MZ-9’ from the Bluetooth® menu.
AUX/USB/TF Card
AUX line-in Connect your device to the speaker using a compatible 3.5mm
jack. The speaker will automatically enter into AUX mode and detect your
device.
USB drive Insert a compatible USB drive, the speaker will automatically
enter into USB mode to detect the drive.
TF card Insert a compatible TF card, the speaker will automatically enter
into TF mode to detect the card.
Functions
- Power Press and hold the power button for 3 seconds to turn it on. Press and hold the power button for 3 seconds again to turn it off.
- Bass Boost Press the button once to turn Bass Boost on, press again to turn it off.
- Play/Pause Press the power button once to pause the audio, press again to restart the audio.
- Previous Track Press the (-) button to restart or play the previous track.
- Next Track Press the (+) button to skip to the next track.
- Volume Turn the dial to the right to increase volume, and to the left to decrease volume.
- Pairing two speakers (TWS) Power on both MZ-9 speakers and press the TWS button on one of the speakers. The speaker will ‘beep’ to indicate entering searching mode. The connection prompt sounds to indicate they have paired successfully. Once connected, the main speaker will flash, and the second speaker will light up. Audio will now play automatically through both speakers.
- Speaker lights Press and hold to turn the speaker lights on, and press and hold again to turn the lights off.
Specifications
- Chipset JL
- Speaker size 119mm (50W), 78mm (15W), 66mm (10W)
- Speaker output 100W (1x50W, 2x15W, 2x10W)
- Frequency 80Hz-15KHz
- Battery capacity 15,600mAh
- Input voltage DC 5V/2A
- Play back time Up to 10 hours
- Charging time Up to 5 hours
- Bluetooth version V5.1
- Wireless working range Up to 10m/32ft (without obstacles)
- Support Bluetooth / AUX / TF Card (up to 32GB) / TWS
- Charging interface USB-Type C
- Water resistant IPX6
- Dimensions 507mm x 188mm x 223mm
Troubleshooting
The speaker has shutdown The speaker will automatically shut down after
15 minutes of inactivity. Or, if the battery is low, the speaker will give a
series of warning ‘beeps’ (up to 20 mins battery life remaining). The speaker
will automatically turn off after a second series of warning ‘beeps’. Charge
as usual for up to 5 hours.
Unable to play music from a storage drive Ensure the music file is stored
in the root directory of the removable device.
The speaker is functioning abnormally Firstly, try shutting down the
speaker. If this does not fix the issue, perform a reset by pressing the
‘RESET’ button.
Support
For product support, please visit our Tech Support page at: veho-world.com
/product-support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>