dyson Supersonic Nural Hair Dryer User Manual
- June 22, 2024
- dyson
Table of Contents
dyson Supersonic Nural Hair Dryer
Product Information
Product Specifications:
- Model: HD16 JN.00000 PN.000000-00-00
- Version: 01
- Power Settings: Fast/High, Gentle/Medium, Mild/Low
- Heat Settings: 4 precise heat settings
- Attachments: Gentle air attachment, Styling concentrator, Smoothing nozzle, Diffuser, Flyaway smoother
- Sensors: NuralTM sensors, Time of Flight sensor, Hall sensor
- Features: Capsule illumination, Scalp protect mode, Pause detect
Product Usage Instructions
Getting Started:
- Ensure Scalp protect mode is activated by default.
- Adjust airflow control to the desired setting: Fast/High, Gentle/Medium, Mild/Low.
- Power on/off using a sliding switch.
- Use the Cold Shot feature to deactivate heat and set style.
NuralTM Sensors:
A network of NuralTM sensors enhances hair care routine by optimizing settings
based on hair type.
Capsule Illumination:
The suspended capsule changes color to indicate the current heat setting; and
auto-adapts in Scalp protect mode.
Styling Attachments:
Intelligent attachments with Heat Shield technology for cool surfaces;
magnetic for easy rotation and fitting.
LEDs:
- Settings: LED lights indicate current settings.
- Diagnostics: Flashing LEDs signal the need for attention – clean
filter or contact the Dyson Helpline if necessary.
Frequently Asked Questions
How do I clean the filter cage?
To clean the filter cage, gently remove it from the hair dryer and wash it with mild soap and water. Ensure it is completely dry before reattaching it.
How do I know if the Pause detect feature is activated?
Wait for the motor sound to ramp down before lifting your hand off the hair dryer. The Capsule illumination will pulse blue to indicate activation.
What should I do if all three red LEDs are flashing continuously?
If all three red lights are flashing, it indicates that your machine needs attention. Clean the filter as instructed or contact the Dyson Helpline for further assistance.
In the box
Getting started
Nural sensors
A network of Nural™ sensors helps the Dyson Supersonic Nural™ hair dryer enhance and optimize your hair care routine.
Scalp protect mode
A Time of Flight sensor measures distance, automatically reducing heat as it
moves closer to your hair. To maintain a comfortable, consistent scalp
temperature.
Pause detect
A motion-sensing accelerometer knows when it’s put down, automatically
deactivating the heater, and decreasing airflow and noise. Capsule
illumination will pulse blue.
Tip:
To be sure the Pause detect has activated, wait for the motor sound to ramp
down before lifting your hand off the hair dryer. Capsule illumination will
pulse blue.
Attachment learning
A Hall sensor recognizes which styling attachment is connected, automatically
switching to its last-used settings.
Capsule illumination
The suspended capsule changes color to show the current heat setting. Heat, and colour, will auto-adapt in Scalp protection mode.
Offering and small details may vary to those shown.
Styling attachments
-
Attachment learning recognizes your Intelligent attachments and learns your go-to styling preferences for each.
-
All attachments are magnetic, for easy rotation and fitting.
-
Heat Shield technology keeps the surface of your styling attachments cool. Remove your attachments using the cool edges.
-
Gentle air attachment follows the same default presets as the hair dryer with n no attachment connected.
LEDs
Settings
The LED lights indicate which settings you are using.
Airflow
Temperature
- Maximum operating temperature in normal working conditions: 105°C.
- Maximum thermistor temperature at safety shut down: 145°C.
Diagnostics
- The LEDs will flash continuously to let you know that your machine needs attention.
- Clean the filter. Follow the instructions or watch the video at https://www.dyson.my/products/hair-care/hair-dryers/supersonic-nural/owners.
- If all three red lights continue to flash, contact the Dyson Helpline.
- Don’t turn it back on.
Regular filter cleaning
Check your filter is clear of debris and hair product residue every month, or when the LED lights alert you.
Maintaining performance
- Unplug your machine from the mains electricity supply and allow it to cool down before cleaning your filter.
- The Dyson Supersonic Nural™ hair dryer has highly tuned technology to give outstanding performance.
- This technology needs to be kept free from debris and hair product residue. Regular maintenance is required to maintain performance.
-
Step 1
Hold the handle of your machine firmly and gently rotate the filter cage anti- clockwise. -
Step 2
Pull down and away from the machine. Use a lint-free cloth or soft brush to remove any dust or debris from both the filter cage and the filter mesh. -
Step 3
Do not use water to clean the filter mesh and avoid applying too much pressure. -
Step 4
- Rotate the filter cage back into position until correctly aligned.
- Rotate clockwise to lock before use.