Redmi N83R Pad Pro Keyboard User Guide

: June 22, 2024
: Redmi

Table of Contents

Redmi N83R Pad Pro Keyboard
Specifications
Product Usage Instructions
FAQs
Product Information
Pairing and Charging
Important Safety Information
Declaration of Conformity
FCC
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Redmi N83R Pad Pro Keyboard

Specifications

Product Name: Redmi Pad Pro Keyboard
Compatibility: Redmi Pad Pro / Redmi Pad Pro 5G
Connection: Bluetooth
Charging Port: USB Type-C
Power Switch: Yes

Product Usage Instructions

Pairing and Charging:
- To pair your device with the Redmi Pad Pro Keyboard, follow these steps:
- Turn on the power switch on the keyboard.
- Enable Bluetooth on your device.
- In your device’s Bluetooth settings, select the Redmi Pad Pro Keyboard to pair.
To charge the Redmi Pad Pro Keyboard:
- Connect the USB Type-C charger to the keyboard.
- Charge the keyboard until fully powered.

FAQs

How do I know if the Redmi Pad Pro Keyboard is compatible with my device?
- The Redmi Pad Pro Keyboard is compatible with Redmi Pad Pro and Redmi Pad Pro 5G. For more compatibility information, visit our official website.
How can I get more information about regulatory compliance?
- For detailed regulatory compliance information, including EU and UK declarations of conformity, visit our official website or refer to the user manual.
What should I do if I encounter pairing issues with the keyboard?
- If you experience pairing issues, make sure the keyboard is charged and within range of your device. Restart both devices and try pairing again.

Product Information

Thank you for choosing the Redmi Pad Pro Keyboard

This product is compatible with Redmi Pad Pro / Redmi Pad Pro 5G
For more compatibility information, visit our official website: www.mi.com/global/service/userguide.

Pairing and Charging

Pair your device and tablet using Bluetooth.
Charge your device with a USB Type-C charger.
For more information, visit our official website: www.mi.com/global/service/userguide.

WEEE

Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU.
To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly.
To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.
Additional safety information and precautions can be accessed at the following link: www.mi.com/en/certification.

Important Safety Information

Read all the safety information below before using your device:

Input: 5V⎓500mA.
Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks.
Use only authorized accessories that are compatible with your device.
After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device for more than 12 hours.
This device’s operating temperature range is 0°C to 40°C. The storage temperature range of the equipment is -20°C to 45°C. Using this device in an environment outside of this temperature range may damage the device.
If your device is provided with a built-in battery, to avoid damaging the battery or the device, do not attempt to replace the battery yourself.
The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery, and accessories according to your local regulations.
Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.
- Do not short-circuit the battery, as this may cause overheating, burns, or other injury.
- Do not place the battery in a high-temperature environment.
- Overheating may cause an explosion.
- Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode.
- Do not burn the battery, as this may cause fire or explosion.
- If the battery appears deformed or damaged, stop using it immediately.
The user shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer.
Keep your device dry.
Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair centre.
Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.
Your device is not a toy. As with all electrical products, precautions should be observed during the handling and use of electrical products to reduce the risk of electric shock. If parents choose to allow children to use the device, they should caution his or her children about the potential hazards while using and handling the device.
For AC/DC adapters, the socket outlet shall be installed near the equipment and shall be easily accessible.

Safety Precautions

Observe all applicable laws and rules restricting the use of devices in specific situations and environments.
Do not use your device in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all rules and regulations of hospitals and health centres.
If you have a medical device, please consult your doctor and the device manufacturer to determine whether your device may interfere with the device’s operation.
To avoid potential interference with a pacemaker, always maintain a minimum distance of 15 cm between your device and the pacemaker.
To avoid interference with medical equipment, do not use your device near hearing aids, cochlear implants, or other similar devices.
Do not use your device in places with high humidity, such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage.
The power delivered by the charger shall be between min [0.075] Watts required by the radio equipment, and max [2.5] Watts to achieve the maximum charging speed.

Declaration of Conformity

EU Regulations RED Declaration of Conformity

Xiaomi Communications Co., Ltd. hereby declares that this product 24042KBD5G complies with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU and RoHS Directive 2011/65/EU.
The full text of the EU Declaration of Conformity is available at the following internet address: www.mi.com/en/certification
Manufacturer’s Authorized EU Representative
Name: Xiaomi Technology Netherlands B.V
Address: Prinses Beatrixlaan 582, 2595BM, The Hague, The Netherlands

RF exposure information

This equipment complies with radiation exposure limits and has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

Legal Information

This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.

Restrictions in the 2.4 GHz band:

Norway: This subsection does not apply to the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Frequency Bands and Power

This device offers the following frequency bands in EU areas only and maximum radio-frequency power:
2.4GHz Bluetooth: 6 dBm

UK Regulations

Xiaomi Communications Co., Ltd. hereby declares that this product 24042KBD5G complies with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017 No. 1206 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 No.3032.
The full text of the UK Declaration of Conformity is available at the following internet address: www.mi.com/en/certification.
Manufacturer’s Authorized UK Representative
Name: Xiaomi Technology UK Limited
Address: 100 Brook Drive Green Park, Unit Part Ground Floor, North Wing, Reading, England, RG2 6UJ

FCC

REGULATORY STATEMENT

Federal Communications Commission(FCC) notice: This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines.
This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

Disclaimer

This quick start guide is published by Xiaomi or its local affiliated company.
Improvements and changes to this guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice.
Such changes will, however, be incorporated into new online editions of the Quick Start guide (please see details at www.mi.com/global/service/userguide).
All illustrations are for illustration purposes only and may not accurately depict the actual device.
Manufacturer: Xiaomi Communications Co., Ltd.
Manufacturer postal address: #019, 9th Floor, Building 6, 33 Xi’erqi Middle Road, Haidian District, Beijing, China, 100085
Brand: Redmi
Model: 24042KBD5G
© Xiaomi Inc. All rights reserved.