Redmi Airdots 2 User Manual
- June 4, 2024
- Redmi
Table of Contents
Redmi Airdots 2
User Manual
Read this manual carefully before use, and retain it for future reference.
Description
As a new of Redmi AirDots series, Redmi AirDots 2 is a true wireless BT headset with high performance, low latency, long battery life, and compared to the previous Redmi AirDots earphones, it optimizes the interconnection method of the left and right ears, no longer restricts the master and slave devices, and realizes seamless switching between single and double ears.
The AirDots 2 is equipped with a BT 5.0 chip allowing to connect more smoothly when listening to music, watching movies, and playing games. Only 4.1g, three models (S/M/L) of earplugs are included with the headset, which is comfortable to wear.
A 7.2mm moving coil unit with built-in physical buttons designed on the AirDots 2 supports one-button control of music playback and calls, and supports calling AI voice assistants. In terms of battery life, the AirDots 2 can be used continuously for about 4 hours with a single full , and can be used for about 12 hours with the charging box.
Packing List
- 1 * Pair of Earphones
- 1 * Box
- 2 * Pairs of Eartips
Features
- BT v5.0 chipset, stable and fast transmission, low latency in game.
- DSP noise reduction technology, HD call.
- Only 4.1g lightweight for comfortable wear
- 7.2mm dynamic drive unit offers premium stereo sound.
- S/M/L in three sizes eartips provided
- Support Master-slave auto switch mode, either is master.
- Max. 12H continuous playtime
- Automatic quick pairing, start the music show.
- One button control of music, call and voice assistant, easy to operate.
Product Overview
Charging Case
Earbuds
The earbuds come with the size M of ear tips installed, you can switch to size S or L if the installed size does not suit your ear.
Wearing
Gently insert the earbud into the ear canal, make sure it is not easy to sway when shaking your head.
Please pay attention to adjust the earbud to expose the microphone during calls.
Charging
Before using the device, please tear off the protective film from the earbuds’ contact points to fully charge them and their charging case.
Connect the charging cable to charge the earbuds and the charging case
simultaneously.
The indicator is red while charging, and changes to white once fully charged,
then goes off after 1 minute.
Turning On
Once you remove the earbud from the charging case, it automatically turns on.
In case the earbuds are not in the charging case and turned off, press and hold
the multi-function button for 1 second till the indicator turns white.
Turning Off
Once you place the earbud into the charging case, it automatically turns off.
When the earbud is turned on, press and hold the multi-function button for 5
seconds till the indicator turns red.
Connection
Automatic Connection:
- Remove both earbuds from the charging case simultaneously, and wait for the earbuds to automatically turn on. The indicator turns white and then changes into quickly blinking white and red alternately, which means the earbuds are connecting with each other. When the indicator of left/right earbud slowly blinks white, please enable the Bluetooth function on your device and search for “Mi True Wireless EBs Basic 2” to connect.
- Once your device and earbuds are successfully connected, your earbuds will automatically connect to the previously paired device (the Bluetooth is enabled) when they are turned on.
Note: If you cannot pair the earbuds, place them back in the case and repeat the previous steps.
Switch between single and dual earbud:
When both earbuds are connected successfully, they are in dual-earbud mode.
Place one of the earbuds back into the charging case and close its lid, the
other earbud will automatically enter the single-earbud mode. Remove the
earbud from the charging case, the dual-earbud mode will automatically be
restored again.
Reset Earbuds
If the earbuds cannot connect properly, please carry out the following steps to reset: Remove the earbuds from the charging case, and make sure they are turned off. Press and hold the multi-function buttons on both earbuds for about 15 seconds until the indicator alternately blinks red and white three times, then release the buttons and place the earbuds back in the charging case. Once the earbuds are reset successfully, the connection between your device and the earbuds are cleared, you should pair them with your device again.
Function Overview
The following functions can be used on both earbuds:
Answer/End calls
Gently press the multi-function button to answer/end calls.
Reject a call
Press and hold the button for 1 second to reject a call.
Play/Pause Music
Press the multi-function button to play/pause the music while using the
earbuds.
Turn On Voice Assistant
Double press the multi-function button to enable the voice assistant while
using the earbuds. Note: The function of voice assistant and quick wake-up
must be supported and enabled on your device.
Answer a Second Call/Switch between Calls
Press the multi-function button to answer the second incoming call during an
ongoing call. Double press the multi-function button to switch between the two
calls.
Switch between Earbuds and Device
During a call, press and hold the multi-function button for 1 second to switch
between the earbuds and your phone.
Mute/Unmute
Double press the multi-function button to mute/unmute the earbuds during an
ongoing call.
Precautions
Warning
-
Do not disassemble, repair or modify the product for any reason, as this may cause fire or even completely destroy the product.
-
Do not expose the product to environments where the temperature is too low or too high (below 0°C or above 45°C).
-
Keep the indicators away from the eyes of children and animals while using the earbuds.
-
Do not use this product during thunderstorms.
Thunderstorms may cause the product to malfunction and increase the risk of electric shocks. -
Do not wipe and clean the earbuds or their case with alcohol or other volatile liquids.
-
Avoid any contact with liquids.
-
Excessive sound pressure from the earbuds can cause hearing loss.
Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.
Specifications
- Name: Mi True Wireless Earbuds Basic 2
- Model: TWSEJ061LS
- Bluetooth Operating Frequency: 2402-2480 MHz (For EU)
- Max RF Output Power: < 20 mW
Earbuds
- Dimensions: 26.65 × 16.4 × 21.6 mm
- Net Weight: Approx. 4.1 g (per earbud)
- Wireless Range :10 m (in an obstacle-free environment)
- Battery Capacity: 43 mAh (per earbud)
- Charging Time: Approx. 1.5 h
- Music Playback Time: Approx. 4 h (earbuds only); approx. 12 h (charging case)
- Standby Time: Approx. 150 h
- Input: 5 V 100 mA
- Battery Type: Lithium-ion Battery
- Wireless Connectivity: Bluetooth 5.0
- Bluetooth Profiles: HFP/A2DP/HSP/AVRCP
Charging Case
- Dimensions: 62 × 40 × 27.2 mm
- Input: 5 V 500 mA
- Output: 5 V 150 mA
- Charging Time: Approx. 2 h
- Battery Capacity: 300 mAh
- Battery Type: Lithium-ion Battery
- Storage Temperature: 0 °C to 45 °C
- Operating Temperature: 0 °C to 45 °C
- Service Life: 1 year
EU DECLARATION OF CONFORMITY
Hereby, Qianxing Inc., declares that the radio equipment type TWSEJ061LS is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://www.mi.com/global/service/support/declaration.html
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Direct current
To indicate on the rating plate that the equipment is suitable for direct
current only; to identify relevant terminals.
To prevent possible hearing damage， do not listen at high volume levels for long periods.
WEEE Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical and electronic equipment should understand the meaning of the crossed out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately.
EAC
Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching fire, explosion, leakage of corrosive electrolyte etc);
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
For further information, please go to www.mi.com
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Chongqing Qianxing Technology Co., Ltd.
( a Mi Ecosystem company)
Address: No. 60 Industrial Main Avenue, Pulv Sub-district, Tongliang District, Chongqing Municipality, China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>