Zigbee ZWSM16-2 Switch Module User Manual
- June 22, 2024
- zigbee
Table of Contents
ZWSM16-2 Switch Module
User Manual ZWSM16-2
ZWSM16-2 Switch Module
Dear customer,
Thank you for purchasing our product. Please read the following instructions
carefully before first use and keep this user manual for future reference. Pay
particular attention to the safety instructions. If you have any questions or
comments about the device, please contact the customer line.
****www.alza.co.uk/kontakt
+44 (0)203 514 4411
Importer Alza.cz a.c., Jankovcova 1522/53, Holešovice, 170
00 Prague 7, www.alza.cz
Technical Specifications
Product Type | 2 Gang Zigbee Switch Module |
---|---|
Voltage | AC100-240V 50/60Hz |
Max. load | LED 4x150W 2x5A |
Operation frequency | 2.405GHz – 2.480GHz IEEE802.15.4 |
Operation temp | -10°C + 40°C |
Protocol | Zigbee 3.0 |
Operation range | <100m |
Dims (WxDxH) | 39x39x20 mm |
IP rating | IP20 |
Certificates | CE ROHS |
Global international operation Whenever & Whenever You are, All-in-one Mobile
App.
Inhouse local operation
Installation
Warnings:
- Installation must be carried out by qualified electrician in accordance with local regulations.
- Keep the device out of reach of children.
- Keep the device away from water, damp, or hot environment.
- Install the device away from strong signal sources such as microwave oven that may cause signal interruption resulted to abnormal operation of the device.
- Obstruction by concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided.
- Do NOT attempt to disassemble, repair or modify the device.
Manual Override
The switch module terminal reserves the access of manual override function for
the end-user to switch on/off.
Switch on/off for permanent on/off function. Notes:
- Both the adjustment on App and switch can overwrite each other, the last adjustment remains in memory.
- The App control is synchronized with the manual switch.
Single Control
Without Switch
Double Switch
Wiring Instructions and Diagrams
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the wiring diagram.
- Insert the module into the junction box.
- Turn on the power supply and follow switch module configuration instructions.
FAQ
Q1: What should I do if I can’t configure the switch module?
Please check whether device is powered on. Make sure the Zigbee Gateway is available. Whether it’s in good internet conditions. Make sure the password entered in App is correct. Make sure the wiring is correct.
Q2: What device can be connected to this Zigbee switch module?
Q3: What happens if the WIFI goes off?
Most of your household electrical appliances, such as lamps, laundry machine, coffee maker, etc. You can still control the device connected the switch module with your traditional switch and once WIFI is active again the device connected to module will connect automatically to your WIFI network.
Q4: What should I do if I change the WIFI network or change the password?
You have to re-connect our Zigbee switch module to the new Wi-Fi network accordingly as per the App User.
Q5: How do I reset the device?
1. Power on/off device for 5 times until the indicator light flashes. 2. Switch on/off the traditional switch for 5 times until the indicator light flash. 3. Press the reset key for about 10 seconds until the indicator light flash.
App User Manual
|
---|---
<https://smartapp.tuya.com/tuyasmart>
|
<http://e.tuya.com/smartlife>
- Scan the QR code to download Tuya Smart App, or you can also search keyword “Tuya Smart” and “Smart Life” at App Store or Google play to download App.
- Log in or register your account with your mobile number or e-mail address. Type in the verification code sent to your mobile or mailbox, then set your login password. Click “Create Family” to enter into the APP.
- Before making the reset operation, please make sure the Zigbee Gateway is added and installed to the WiFi network. Ensure that the product is within the range of Zigbee Gateway Network.
- After the wiring of switch module is done, press the reset key for about 10 seconds or turn on/off the traditional switch for 5 times until the indicator light inside the module is flashing quickly for pairing.
- Click “+” (Add sub-device) to select the suitable product gateway and follow the on-screen instruction for paring.
- The connecting will take about 10-120 seconds to complete depending on your network condition.
- Finally, you can control the device via your mobile phone.
- Finally, you can control the device via your mobile phone.
System Requirements
- WIFI Router
- Zigbee gateway
- iPhone, iPad (iOS 7.0 or higher), Android 4.0 or higher
Warranty Conditions
A new product purchased in the Alza.cz sales network is
guaranteed for 2 years. If you need repair or other services during the
warranty period, contact the product seller directly, you must provide the
original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions,
for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other relevant provisions of EU directives.
WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.
References
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- alza.at
- Alza | Alza.co.uk
- Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
- Alza.cz
- alza.de
- alza.hu
- alza.sk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>