TCL-RSA-7KW Electric Vehicle Charger Instruction Manual
- June 22, 2024
- TCL
Table of Contents
TCL-RSA-7KW Electric Vehicle Charger
Specifications
- Charging Mode: Mode 3 (IEC 7kW / 32A max)
- Input/Output Power & Current Rating: 7kW / 32A
- Input/Output Voltage Rating: 184-264Vac, single phase
- Grid Type: L+N+PE TN-S, TN-C-S, TT, IT(L1+L2 230Vac Single phase)
- Charging Interface: IEC 62196-2 Type 2 tethered plug (Case C)
- Metering: Onboard metering chip 4W Type A
- Power Consumption: 30mA + DC 6mA
- Residual Current Protection: Yes
- Protection: Overcurrent, Overvoltage, Undervoltage, Residual current, Short circuit, Over temperature, Grounding fault
Product Usage Instructions
Installation
The electric vehicle charger is designed for easy installation. It can be
wall-mounted or pole-mounted (pole is optional).
User Interface
The user interface includes LED indicators for status indication. There are no
emergency buttons; instead, a rotary switch is provided inside for setting
output current limitation.
User Authentication
User authentication can be done using RFID cards or through the dedicated
mobile app.
Communication
The charger supports communication via Bluetooth and RS485. The TCL-RSAS-7KW
model also supports Wi-Fi, Ethernet, and 4G connectivity.
Environmental Conditions
Ensure that the charger is operated within the specified temperature range of
-30 to 50 degrees Celsius and stored within -40 to 85 degrees Celsius. The
charger is designed for altitudes up to 3000m above sea level.
Mechanical Specifications
- IP Rating: IP65
- IK Rating: IK10
- Cooling: Natural cooling
- Charging Cable Length: 5m
- Dimensions (WxHxD): 280280148 mm (without Pole), 2801210201mm (with Pole)
- Weight: Approximately 4kg
Certification and Compliance
The electric vehicle charger complies with various standards including IEC,
LVD, RED, and CE-RED. It meets certification requirements such as IEC 61851-1
and EN 50470-3:2022.
TCL-RSA-7KW
Main Features
- Excellent industrial design brings more aesthetic experience.
- Connect to any backend based on OCPP 1.6J protocol.
- The bottom wiring window is easy for installation.
Specifications
TCL-RSAS-7KW
Main Features
- Excellent industrial design brings more aesthetic experience.
- Connect to any backend based on OCPP 1.6J protocol.
- The bottom wiring window is easy for installation.
- Support local dynamic load management(Additional meter is required).
Specifications
TCL-RTA-11KW
Main Features
- Excellent industrial design brings more aesthetic experience.
- Connect to any backend based on OCPP 1.6J protocol.
- The bottom wiring window is easy for installation.
Specifications
TCL-RTAS-11KW
Main Features
- Excellent industrial design brings more aesthetic experience.
- Connect to any backend based on OCPP 1.6J protocol.
- The bottom wiring window is easy for installation.
- Support local dynamic load management(Additional meter is required).
Specifications
Frequently Asked Questions
Q: Can the charger be used with all types of electric vehicles?
A: The charger is compatible with most electric vehicles that support the IEC
62196-2 Type 2 tethered plug standard (Case C).
Q: Is professional installation required?
A: While the charger is designed for easy installation, professional
installation is recommended to ensure proper setup and safety.
Q: How can I monitor charging status?
A: You can monitor the charging status through the LED indicators on the
charger or through the mobile app when connected via Bluetooth or Wi-Fi.