Orchard Audio Starkrimson Mono Ultra Premium Amplifier Instructions
- June 22, 2024
- Orchard Audio
Table of Contents
Orchard Audio Starkrimson Mono Ultra Premium Amplifier
Thank you
Thank you for your support!
Starkrimson® Mono Ultra Premium Instructions
Danger High Voltage
The amplifier outputs (speaker terminals) can be up to 80V, do not touch while the amplifier is on.
Notes
- Do not make or break the connections to the amplifier while it is on.
- Due to the bridged amplifier design both speaker terminals are hot when the amplifier is on.
- Do not connect either of the speaker terminals to ground/earth ground.
- There are no user-serviceable parts, opening the amplifier will void the warranty
To turn the amp on
- Connect Speaker.
- Connect XLR Input.
- Plug the power cord into the amplifier.
- Turn it on by firmly pressing switch into the ON (I) position, the switch will make a click when fully engaged.
- It may take up to 30 seconds for the amplifier to become active.
To turn the amp off
- Turn off by pressing the switch into the OFF (0) position, the switch will make a click when fully disengaged.
Amplifier Protection Circuits
- Thermal – If the amplifier overheats it will turn off until it is cool enough to continue operation.
- Overload – If overload occurs, the amplifier will turn off for 20 seconds and then turn back on.
- Circuit Breaker – The On/OFF switch is also a circuit breaker, in a scenario where it turns itself OFF (0), wait at least 5 minutes before turning back on. If it turns OFF (0) a second time please contact us.
How do you like them apples?
Rev 1.0
Read User Manual Online (PDF format)
Loading......