Orchard Audio PecanPi Streamer Hi-Fi Networked Music Player Instructions
- June 9, 2024
- Orchard Audio
Table of Contents
Orchard Audio PecanPi Streamer Hi-Fi Networked Music Player
moOde Audio Instructions
moOde’s interface can be accessed by using a web browser.
- Open browser and go to http://moode.local
Powering Up the PecanPi™ Streamer
-
Make all audio connections to the device.
-
Connect ethernet.
-
Connect power.
-
The device can take up to 60 seconds to boot up.
-
Once the device is booted up, access its interface using a web browser as
described above. -
For further moOde usage follow their instructions see their website at this link: https://moodeaudio.org/
Powering Down the PecanPi™ Streamer
To power down, do a shutdown of moOde in the menu, wait 30 seconds and then unplug the power cord.
PecanPi™ Streamer Volume Control
The knob on the front of the unit controls volume.
- Knob fully clockwise – volume at 0dB (max volume)
- Knob fully counter-clockwise – device muted
If using the knob, set moOde’s volume to 100% for best performance.
If you want to use the software volume control built into moOde, turn the knob fully clockwise.
S/PDIF Operation
The S/PDIF input has an automatic switch over that takes audio from the S/PDIF connection when there is a valid signal. When no valid signal is available on the S/PDIF interface the device defaults back to taking streaming data from moOde.
When operating from the S/PDIF interface the volume can only be controlled using the knob.
Wi-Fi Instructions
If you don’t have an ethernet connection next to the streamer adding one is
easy with either of these products that many of my customers use:
TP-Link AC750 Wi-Fi Bridge and Extender – For 5G
TP-Link 300Mbps Wi-FI Bridge and Extender – For 2.4G
References
- moodeaudio.org
- TL-WR802N | 300Mbps Wireless N Nano Router | TP-Link
- TL-WR902AC | AC750 Wireless Travel Router | TP-Link
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>