Orchard Audio Starkrimson Stereo Ultra Amplifier Instructions
- June 5, 2024
- Orchard Audio
Table of Contents
Instructions
Thank you for your support!
Starkrimson® Stereo Ultra Instructions
Danger High Voltage:
The amplifier outputs (speaker terminals) can be up to 80V, do not touch while the amplifier is on.
Notes:
-
Do not make or break the connections to the amplifier while it is on.
-
Due to the bridged amplifier design both speaker terminals are hot when the amplifier is on.
• Do not connect any of the speaker terminals to ground/earth ground. -
There are no user-serviceable parts, opening the amplifier will void the warranty.
To turn the amp on:
- Connect Speakers.
- Connect Input (XLR or RCA).
- Plug the power cord into the amplifier.
- Turn it on by pushing the power button on the front, the blue light will illuminate.
• It may take up to 30 seconds for both amplifier channels to become active.
To turn the amp off:
- Turn off by pressing the power button on the front (blue light will turn off), and wait at least 1 minute for capacitors to discharge before removing connections.
12V Trigger Operation (Optional)
When your order the amplifier with this option it will not function without a
12V trigger.
To turn the amplifier on first push the button on the front and then have the
trigger (12V) activate it. Both a button press (blue light) and trigger must
be present for the amplifier to turn on.
- It may take up to 30 seconds for both amplifier channels to become active.
How do you like them apples?
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>