Silverlit EI-10365 Little RC Racers Car Instruction Manual

**Silverlit EI-10365 Little RC Racers Car Instruction Manual

**

Product Instruction

Safety Precautions:

• Parents, this toy is recommended for children. To ensure that your child’s play time is both safe and fun, please review the operating instructions with your children.
• Do not pick up the toy when it is moving.
• Keep hands, hair and loose clothing away from any moving parts when the toy is turned ON.
• Remove battery from the toy when not in use.
• Do not operate the remote controlled vehicle on street. Avoid hitting people, pets or home furnishings.
  Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Cautions:

• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable battery should be charged under adult supervision.
• Different types of batteries or new and used batteries are not to be mixed.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with correct polarity. (+ and – )
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

The use of the product may be disrupted by electromagnetic interference. If this is the case, switch the device off and on again following the instructions in the user manual. If the functions are not reset, move to another location.

SAFETY CIRCUIT :
During use, the internal power in the electric circuit can get quite high (for example during a 360 spin). In such a case safety circuit will shut down the vehicle for approximatively 1 minute.
During this period the car will not respond to signals from the transmitter. This is not a defect but a safety measure to protect the electronic circuits. After this period, the car will resume normal operation.

Note:

• Parental guidance is recommended when installing or replacing batteries.
• You are advised to replace the battery as soon as the function becomes impaired.
• Instruction sheet and packaging must be retained since it contains important information.
• Users should keep strict accordance with the instruction manual while operation the product.
• Under the environment with electrostatic discharge, the sample may malfunction and require user to reset the sample.

Care and Maintenance:

• Always remove batteries from the toy when it is not being used for a long period of time.
• Wipe the toy gently with a clean damp cloth.
• Keep the toy away from direct sunlight and/or direct heat.
• Do not submerge the toy into water that can damage the electronic assemblies.
• Operation temperature 5 – 35°C – Receiver Category 3

Battery requirement (Controller):

Power Supply :
Rating : DC 3,0 V / 0,5 W
Batteries : 2 x 1,5 V “AAA”/L R 03 / AM 4 (not included)

Battery requirement (Vehicle):

Power Supply :
Rating : DC 4,5 V / 5,0W
Batteries : 3 x 1,5 V “AAA”/LR03 / AM4 (not included)

WARNING:
Not suitable for children under 36 months, Small Parts, Choking Hazard.

Hereby, Silverlit Toys Manufactory Ltd declares that the radio equipment SK17072 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.silverlit.com/a/certificate

FCC Statements

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning !

Remove these batteries from the unit by pulling up on one end of each battery positive by hand.
DO NOT remove or install batteries using sharp or metal tools.

Delivery Contents

RC RACER

Controller

Instruction manual

Battery Installation

Parts Identification

1. Head Light

2. ON/OFF button

3. FORWARD / BACKWARD

4. ON/OFF button

5. LEFT / RIGHT

Direct Control

If the car tends to drift to the left or right on its own, move the trimmer (beneath the car) to the right or left respectively to adjust the steering.

Waste Electrical and Electronic Equipment (WEEE)
When this appliance is out of use, please remove all batteries and dispose of them separately. Bring electrical appliances to the local collecting points for waste electrical and electronic equipment. Other components can be disposed of in domestic refuse.

Silverlit SAS, 80 rue Barthelemy Danjou, 92100 Boulogne-Billancourt / France.
©2024 Silverlit. All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>