Silverlit 81478 My First Activity Truck Instruction Manual
- June 9, 2024
- Silverlit
Table of Contents
81478 My First Activity Truck
Instruction Manual
81478 My First Activity Truck
MY FIRST
ACTIVITY TRUCK
Silverlit SAS, 80 rue Barthelemy Danjou, 92100 Boulogne-Billancourt / France.
©2022 Silverlit. All rights reserved.
Delivery Contents
Battery Installation
Make sure the power switch is on “OFF” position.
Parts Identification
Lift up the cover, refill water into the container using the water filler, and
then close the cover.
Light & Sound effect
REAL MIST APPEAR WHILE DRIVING!
For ages 2+
Safety Precautions:
– Parents, this toy is recommended for children. To ensure that your child’s
play time is both safe and fun, please review the operating instructions with
your children.
– Do not pick up the toy when it is moving.
– Keep hands, hair and loose clothing away from any moving parts when the toy
is turned ON.
– Remove battery from the toy when not in use.
– Do not operate the vehicle on street. Avoid hitting people, pets or home
furnishings.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Cautions:
-Non-rechargeable batteries are not to be recharged.
-Rechargeable batteries are to be removed from the toy before being charged.
-Rechargeable battery should be charged under adult supervision.
-Different types of batteries or new and used batteries are not to be mixed.
-Only batteries of the same or equivalent type as recommended are to be used.
-Batteries are to be inserted with correct polarity. (+ and – )
-Exhausted batteries are to be removed from the toy.
-The supply terminals are not to be short-circuited.
– Do not mix old and new batteries.
– Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
Note:
– Parental guidance is recommended when installing or replacing batteries.
– You are advised to replace the battery as soon as the function becomes
impaired.
– Instruction sheet and packaging must be retained since it contains important
information.
– Users should keep strict accordance with the instruction manual while
operation the product.
– Under the environment with electrostatic discharge, the sample may
malfunction and require user to reset the sample.
Care and Maintenance:
– Always remove batteries from the toy when it is not being used for a long
period of time.
– Wipe the toy gently with a clean damp cloth.
– Keep the toy away from direct sunlight and/or direct heat.
– Do not submerge the toy into water that can damage the electronic
assemblies.
– Excess condensed water is designed to exit through a vent underneath car
body. Please wipe away condensed water with a clean damp cloth.
Battery requirement (Vehicle):
| Power Supply :| ****
---|---|---
| Rating :| DC 4,5 V / 1,5W
| Batteries :| : 3 x 1,5 V “AAA”/LR03 / AM4 (not included)
FCC Statements
**** This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Waste Electrical and Electronic Equipment (WEEE)
When this appliance is out of use, please remove all batteries and dispose of
them separately. Bring electrical appliances to the local collecting points
for waste electrical and electronic equipment. Other components can be
disposed of in domestic refuse.
Warning !
Remove these batteries from the unit by pulling up on one end of each battery
positive by hand.|
---|---
DO NOT remove or install batteries using sharp or metal tools.|