UNITY M-LOK Mounting Kit Instruction Manual
- June 21, 2024
- UNITY
Table of Contents
UNITY M-LOK Mounting Kit
PRODUCT OVERVIEW
The AXON™ SL M-LOK® Mounting Kit increases functionality of the AXON™ SL
remote switch by expanding the mounting capabilities to the M-LOK® rail. It
replaces the rail clamps with a frame that provides attachment to any M-LOK®
rail surface.
ENSURE FIREARM IS UNLOADED
WARNING
CAUTION
OVER-TORQUING FASTENERS CAN DAMAGE YOUR MOUNT AND WILL NOT BE COVERED BY WARRANTY.
-
Ensure the Rail Clamps on your AXON™ SL are uninstalled prior to installing the M-LOK® Mounting Kit. Set the Rail Clamps and associated screws aside for safe keeping.
-
Insert the M-LOK® Screws through the AXON™ SL M-LOK® Mounting Kit Frame and thread partially into the M-LOK® nuts.
-
Guide the AXON™ SL Control Module through open slot of M-LOK® Mounting Kit until fully seated.
-
Place the AXON™ SL with M-LOK® Mounting Kit in desired location on the rail. Guide the M-LOK® Screws with the M-LOK® Nuts installed through the desired M-LOK® slot. Lightly snug both Screws before applying torque. When torqueing, do not exceed 10 in-lbs (1.13 Nm). Ensure M-LOK® Nuts are fully perpendicular to M-LOK® slots in rail (fully seated).
CUSTOMER SUPPORT
INFO@UNITYTACTICAL.COM
©2023 UNITY Tactical. All Rights Reserved.
Specifications subject to change without notice. PAT: UTIP.CO
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>