Veho ZB-4 Wireless Headphones Microphone 5.3 Bluetooth Instruction Manual
- June 22, 2024
- veho
Table of Contents
Veho ZB-4 Wireless Headphones Microphone 5.3 Bluetooth
Guide To The Headphones
- Mode
- Volume – / Previous track
- Volume + / Next track
- Power button
- 3.5mm audio port
- Pairing status LED
- Charging status LED
- USB-C charging port
- MicroSD card slot
Charging
Charging the headphones We recommend fully charging the headphones before
using for the first time.
Connect the supplied USB-C cable to the headphones and then into a compatible
5V⎓1A power source. Whilst charging the status LED will show red, turning blue
once fully charged.
Pairing
Pairing with a device Press and hold the power button for 3 seconds
to switch the headphones on, the headphones will automatically enter pairing mode, and the status LED will flash red/blue. Select ‘Veho ZB-4’ from the Bluetooth® menu on your device, once connected, the status LED will remain blue.
Line-in Cable
Using the Line-in cable Connect the supplied 3.5mm audio cable to the
headphones and your device. Power on the headphones by pressing and holding
the power button for 3 seconds, press the mode button to detect the device.
Microsd Card
Using a MicroSD card Insert a compatible MicroSD card, power on the
headphones by pressing and holding the power button for 3 seconds, press the
mode button to detect the card.
Using The Headphones
Power on/off Press and hold the power button for 3 seconds to turn on. Press and hold the power button again for 5 seconds again to turn off.
Mode selection Press the mode button once to change modes between Bluetooth®/micro SD Card/AUX.
Play/pause Press the power button once to play and once again to pause
Volume up/Next track Press the (+) button for 2 seconds to skip to the next track. Press once to increase the volume.
Volume down/Previous track Press and hold the (-) button for 2 seconds to skip to the previous track. Press once to reduce the volume.
Answering/ending calls Press the power button once to answer an incoming call. Press once again to end the call.
Rejecting calls Press and hold the power button for 2 seconds to reject an incoming call.
Voice assistant Double-click the mode button to activate the voice assistance on your mobile device.
Number redial Double click the power button to redial the most recent contact on your call log.
Specifications
| Bluetooth® version | V5.3 |
|---|---|
| Driver | Ø 44mm |
| Speaker sensitivity | 108 ± 3dB |
| Impedance | 32Ω |
| Frequency response | 20Hz-20KHz |
| Input voltage | 5V⎓1A |
| Battery size | 500mAh |
| Charge time | Approx. 3 hours |
| Play time | Up to 36 hours |
| Charging port type | USB-C |
| Wireless range | Up to 10 meters |
| Dimensions | 196mm x 182mm x 82mm |
| Weight | 225g |
Multi-
lingual manual download
veho-world.com/downloads
CUSTOMER SUPPORT
Support
For product support, please visit our
Tech Support page at:
veho-world.com/product-support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>