RYOBI RYSP21A Cordless Solar Panel Instruction Manual

: June 22, 2024
: RYOBI

Table of Contents

Original Instructions
Intended Use
General Safety Warnings
Maintenance
Storage
Know Your Product
Product Specifications
RYOBI Warranty Application Conditions

RYSP21A

Important!

It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product.

Original Instructions

Safety, performance, and dependability have been given top priority in the design of your cordless solar panel.

Intended Use

The cordless solar panel charges USB devices using converted solar energy. The product can charge through USB-A outputs.

The product is intended for outdoor use only. The product is designed for home or domestic use.

Do not use the product for any other purpose.

General Safety Warnings

WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fi re, and/or serious injury.

Save all warnings and instruction for future reference.

Use the product in areas with good light exposure. Avoid using the product under trees, awnings, overhangs, and behind windows that are screened, tinted, or with dividers or obstructed views.
Do not expose the product to rain, wet, or damp conditions. Water entering the product increases the risk of electric shock.
Use the product flat on the ground, on a level surface, or hung on a vertical surface.
Position the product to face directly towards the angle of the sun for best performance. Make sure that the entire surface of the product is exposed to direct sunlight. The power output of the product may be reduced if parts of the surface of the product are shaded or blocked from sunlight.
When hanging the product vertically, make sure to fasten it securely. Damage can occur if the product falls.
Do not use the product if it has been dropped or received a sharp blow. A damaged product increases the risk of fire. Always inspect the product for damage before use.
Use caution when plugging or unplugging other devices into the product. Do not force plugs into the product.
Never modify, disassemble, or attempt to repair the product yourself.
Do not put foreign objects into the product.
Use caution when touching the product. The product may generate heat during use.
Disconnect the devices after charging and fold the solar panel before storing.
Store the product indoors.
If the product is used in a manner not specified by the manufacturer, the protection provided by the product may be impaired.

Maintenance

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, and grease.
Do not, at any time, let brake fluids, gasoline, petroleum based products, and penetrating oils come in contact with plastic parts. These products contain chemicals that can damage, weaken, or destroy plastic.

Storage

Store the product in a cool, dry place between 10 °C and 38 °C.

Know Your Product

See Fig. 1

Storage pouch
USB-A port
Solar panels

Product Specifications

Cordless solar pane

Category 1: mobile applications

|

RYOBI Warranty Application Conditions

In addition to any statutory rights resulting from the purchase, this product is covered by a warranty as stated below.

The warranty period is 24 months for consumers and commences on the date the product was purchased. This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no warranty provided in case of professional or commercial use. This warranty applies only on new products.
There is a possibility to extend for a part of the range of power tools (AC/DC) the warranty period over the period described above using the registration on the www.ryobitools.eu website. The eligibility of products for extended warranty is clearly displayed in stores and / or on packaging and is contained within the product documentation. The end user is required to register his/her newly acquired products online within 30 days from the date of purchase. The end user may register for the extended warranty in his/her country of residence if listed on the online registration form where this option is valid. Furthermore, end users must give their consent to the storage of their personal data that is required to be entered online. They must also accept the terms and conditions. The registration confirmation receipt, which is sent out by e-mail, and the original invoice showing the date of purchase will serve as proof of the extended warranty.
The warranty covers all defects of the product during the warranty period due to faults in workmanship or material at the purchase date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages. The warranty is not valid if the product has been misused, used contrary to the instruction manual, or has been incorrectly connected to a power supply. This warranty does not apply to:
- any damage to the product that is the result of improper or lack of maintenance
- any product that has been altered or modified
- any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observance of the instruction manual
- any product not displaying the CE approval mark on the rating plate
- any product that has been attempted to be repaired by a non-authorized warranty service centre or without prior authorization by Techtronic Industries
- any product connected to improper power supply (amps, voltage, frequency)
- any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
- normal wear and tear spare parts
- inappropriate use, overloading of the tool
- use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately, including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide, etc.
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.
In some countries your local RYOBI dealer undertakes to send the product to the RYOBI service organization. When sending a product to a RYOBI service station, the product should be safely packed without any dangerous contents such as petrol, marked with sender’s address and accompanied by a short description of the fault.
A repair / replacement under this warranty is free of charge. It does not constitute an extension or a new start of the warranty period. Exchanged parts or products become our property. In some countries delivery charges or postage will have to be paid by the sender. Your statutory rights arising from the purchase of the product remain unaffected.
This warranty is valid in the European Community, Switzerland, Iceland, Norway, Liechtenstein, Turkey, Russia, and the United Kingdom. Outside these areas, please contact your authorized RYOBI dealer to determine if another warranty applies.

AUTHORISED SERVICE CENTRE

Any request or issue with the product can be addressed to your local authorised service centres (visit www.ryobitools.eu) or directly to: Techtronic Industries GmbH, Max Eyth Straße 10, 71364 Winnenden, Germany. Please state the serial number and product type printed on the label.

Techtronic Industries GmbH
Max-Eyth-Straße 10,
71364 Winnenden, Germany

Techtronic Industries (UK) Ltd
Parkway
Marlow Bucks SL7 1YL
UK
099280002001-01