KOSO NF623000 High Flow Oil Pump Instructions
- June 21, 2024
- KOSO
Table of Contents
KOSO NF623000 High Flow Oil Pump
Product Usage Instructions
Installation:
Before starting the installation process, carefully read the instructions
provided in the manual. Follow the steps described to ensure proper
installation. Any damage caused by incorrect installation will be the
responsibility of the user.
Assembly:
- Start by assembling the high flow oil pump, outer rotor, inner rotor, axle, and fixed pin in the order specified in the manual.
- Make sure to tighten the screws to the recommended torque of 5.2 Nm (52 kgf.cm).
Disassembly:
When disassembling the product, ensure to follow the reverse order of
assembly, starting from the highest numbered part to the lowest numbered part.
Maintenance and Repairs:
Only our professionals should execute maintenance and repairs on the
product. Do not attempt to disassemble or change any parts as it will void the
warranty.
Frequently Asked Questions (FAQ):
-
Q: Can I disassemble the unit myself for maintenance?
A: No, maintenance and repairs should only be carried out by our professionals to avoid voiding the warranty. -
Q: What is the oil flow difference compared to the stock pump?
A: The oil flow of this pump is 20% more than the stock one, providing better performance.
Thank you for purc hasing our product. Before installing/operating the product, read the instructions carefully and retain them for future reference.
Attention!
- For installation, follow the steps described. Any damage caused by wrong installation shall be imputed to the users.
- Do not disassemble or change any parts. Opening and disassembling this unit will void any warranty.
- Maintenance and repairs should be executed by our professionals only.
NOTE Some procedures must be followed to avoid damage to the product.
WARNING! Certain procedure must be followed to avoid damages to yourself,
to the vehicle or to others.
ACCESSORIES
OIL PUMP ASSEMBLY
PART DESCRIPTIONS
- Lock pin
- Screw
- High flow oil pump (Accessory 1)
- Outer rotor (Accessory 2)
- Inner rotor (Accessory 3)
- Fixed pin (Accessory 5)
- Gasket
- Gear
- Stock Fixed pin
- Axle (Accessory 4)
NOTE Assemble in the order shown above. Make sure to disassemble the parts in reverse order (highest number to lowest number).
OIL PUMP FLOW CURVE CHART
NOTE Oil flow is 20% more than with the stock one.