ACONEE 13X25FT Carport Heavy Duty Car Canopy User Manual
- June 20, 2024
- ACONEE
Table of Contents
CARPORT USER MANUAL
13X25FT
13X25FT Carport Heavy Duty Car Canopy
Attention:
Please read the manual completely before starting the
installation(A ladder & an electric drill are recommended for the assembly.)
- Please confirm that the parts are complete and undamged.
(Corresponding part number is affixed to each part)
If any parts are missing or damaged, please contact the customer support email
to reissue or contact seller.
1.1 Email: support@acekool.vip
Please Contain: 1 Order number 2 Model number 3 ltem Number 3)Photos of the
missing/damaged parts(optional)
1.2 Steps to Contact seller (amazon.com orders only):
Step 1: Log into your Amazon account
Step 2: Go to “Your Orders” and find the purchase
Step 3: Click on “Contact Seller”
| Item NO. | Rem Name | Reference Image | Qty. |
|---|---|---|---|
| 1 | Steel Pipe | 12 PCS | |
| 2 | Steel Pipe | 10 PCS | |
| 3 | Steel Pipe | 7 PCS | |
| A | 3-Way Comer Connector | 6 PCS | |
| B | 4-Way Comer Connector | 9 PCS | |
| C | Foot Plate | 8 PCS | |
| CC | Foot Plate | 2 PCS | |
| D | Foot Plate | 10 PCS | |
| E | Bull joint | 4 PCS | |
| F | Door frame tube 1 | 4 PCS | |
| G | Door frame tube 2 | 4 PCS | |
| AA | Steel Pipe | 1 PCS | |
| BB | Steel Pipe | 1 PCS | |
| DD | Steel Pipe | 1 PCS | |
| Sidewall | 2 PCS | ||
| Zipper 000C | 2 PCS | ||
| GrOlald Peg | 30 PCS | ||
| 1/416 a SSW Screw | 12 PCS+ |
2 PCS Same,
OSA 19.0.1 Sate| | 1 PCS +
1 PCS Spares
Rope| | 8 PCS
Pressure Lever| | 4 PCS
Anchor| | 4 PCS
Bungee Cords| | 72 PCS +
3 PCS Spares
Top Cover| | 1 PCS
Arrange and classify the parts neatly to facilitate installation.
This is the part structure diagram of our product, you can combine this
diagram and follow the steps to install 
Start installation works
Step1:
Assemble the long pipes required on the top of the carport (the length after
connection is 20 feet), a total of three.
You will use 1 x 3 pcs, Ax 2 pcs, B x 2 pcs for each pipe
Step 2:
Connect the obtained three 20 Feet long pipes with the pipe 2 to get the
carport roof frame. 
Step 3 :
Put the Top Cover on the top frame and fasten the door side with bungee cords.
You will use 6 bungees for each side.
Attention: Be sure
to cover the top cover at this time, otherwise the subsequent installation
will not work normally
Step 5 :
Connect 2 pipe 3 with the top frame. 
Step 6 :
Repeat the Step 4 & Step 5 to install another side. Step 7 :
Connect the pipe D with 3 pipe that already installed, at this point you will
get a complete carport frame with roof. 
Step 8 :
Install bolts in different holes for height adjustment
Step 9 :
Fix the drawstring and tent feet to the ground.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>