ACONEE 3X6 Heavy Duty Car Canopy with Ventilated Windows User Manual

Table of Contents

ACONEE-3X6-Heavy-Duty-Car-Canopy-with-Ventilated-Windows-
PRODUCT

Specifications:
- Pressure Lever Butt joint for assembly
- Door frame tube 1: 9 PCS
- Door frame tube 2: 8 PCS
- Various bolts included: M6 x 55MM, M6 x 15MM

Start by identifying the different components labelled A to G in the manual.
Assemble the door frame tubes 1 and 2 using the butt joint.
Use the provided bolts (M6 x 55MM, M6 x 15MM) for securing the assembly.
Install the pressure lever according to the instructions.
Follow the height adjustment guidelines by placing bolts in different holes as needed.

Q: How many door frame tubes are included in the package?

A: There are a total of 2 door frame tubes included - 1 for tube 1 and 1 for tube 2.

Q: Are there spare parts provided with the product?

A: Yes, the package includes spare parts such as bolts and other components for replacements if needed.

Q: What is the purpose of the pressure lever?

A: The pressure lever is used for additional support and stability during installation and usage of the product.

Attention:

Please read the manual completely before starting the installation(A ladder & an electric drill are recommended for the assembly.)

Please confirm that the parts are complete and undamaged. (The corresponding part number is affixed to each part)
If any parts are missing or damaged, please contact the customer support email to reissue or contact the seller.
Email: support@acekool.vip.
Please Contain:
- Order number
- Model number
- Item
Number Photos of the missing/damaged parts(optional)

Steps to Contact Seller (amazon.com orders only):

Arrange and classify the parts neatly to facilitate installation.

This is the part structure diagram of our product, you can combine this diagram and follow the installation steps it.

Start installation works

Step 1: Assemble the long pipes required on the top of the carport (the length after the connection is 20 feet), a total of three. You will use 1 x 3 pcs, A x 2 pcs, and B x 2 pcs for each pipe. $ACONEE-3X6-Heavy-Duty-Car-Canopy-with-Ventilated-Windows-FIG-1 $2$$
Step 2: Connect the obtained three 20-foot-long pipes with pipe 2 to get the carport roof frame. $ACONEE-3X6-Heavy-Duty-Car-Canopy-with-Ventilated-Windows-FIG-1 $4$$
Step 3: Put the Top Cover on the top frame and fasten the door side with bungee cords. You will use 6 bungees for each side.
- Attention: Be sure to cover the top cover at this time, otherwise the subsequent installation will not work normally.
Step 4: Connect 2 pipe 3 with the top frame.
Step 5: Connect 2 pipe 3 with the top frame.
Step 6: Repeat the Step 4 & Step 5 to install another side.
- Step 6: Connect 2 pipe 3 with the top frame.
- Repeat the Step 4 & Step 5 to install another side.
Step 7: Connect pipe D with 3 pipes that are already installed, at this point you will get a complete carport frame with a roof.
Step 8: Use bungee cords to install the gate and side walls. $ACONEE-3X6-Heavy-Duty-Car-Canopy-with-Ventilated-Windows-FIG-1 $21$$
Step 9: Fix the drawstring and ten feet to the ground.