Whirlpool WHER25 Manual
- June 16, 2024
- Whirlpool
Table of Contents
Whirlpool WHER25 Manual
Model WHER25
How to install, operate
and maintain your
Reverse Osmosis
Drinking Water System
Do not return unit to store
nstalling, operating or maintaining your reverse osmosis system, call our toll
free number:
1-866-986-3223
Monday- Friday, 8 AM – 7 PM EST or visit
www.whirlpoolwatertreatment.com
When you call, please be prepared to provide the model, date code and serial
number of your product, found on the rating decal, located inside the cover.
System tested and certified by NSF International against NSF/ANSI Standards 42 & 58. See performance data on page 26 for details.
Manufactured and warranted by Ecodyne Water Systems 1890 Woodlane Drive Woodbury, MN 55125
7322259 (Rev L 11/21/14)
Product No. 8576162B
WARRANTY
ONE YEAR LIMITED WARRANTY ON REVERSE OSMOSIS DRINKING WATER SYSTEM
(Except filter cartridges and R.O. membrane)
Warrantor: Ecodyne Water Systems, 1890 Woodlane Drive, Woodbury, MN 55125
Warrantor guarantees, to the original owner, that the Reverse Osmosis Drinking
Water System, when installed and maintained
in accordance with the instructions, will be free from defects in materials
and workmanship for a period of one (1) year from the date of purchase. If,
within the first year, a part proves, after inspection, to be defective,
Warrantor will, at its sole option, either replace or repair the part without
charge except normal shipping and installation charges. Labor to maintain the
equipment is not part of the warranty. Filters and membranes, which are
expendable, are not covered by the warranty.
TO OBTAIN WARRANTY PARTS, SIMPLY CALL 1-866-986-3223, Monday – Friday, 8 am – 7 pm EST, for assistance. This warranty applies only while this product is in use in the United States or Canada.
General Provisions
The above warranties are effective provided the Reverse Osmosis Drinking Water
System is operated at water pressures not exceeding 125 psi, and at water
temperatures not exceeding 100°F; provided further that the Reverse Osmosis
Drinking Water System is not subject to abuse, misuse, alteration, neglect,
freezing, accident or negligence; and provided further that the Reverse
Osmosis Drinking Water System is not damaged as the result of any unusual
force of nature such as, but not limited to, flood, hurricane, tornado or
earthquake. Warrantor is excused if failure to perform its warranty
obligations is the result of strikes, government regulation, materials
shortages, or other circumstances beyond its control.
*THERE ARE NO WARRANTIES ON THE REVERSE OSMOSIS DRINKING WATER SYSTEM BEYOND THOSE SPECIFICALLY DESCRIBED ABOVE. ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, ARE DISCLAIMED TO THE EXTENT THEY MIGHT EXTEND BEYOND THE ABOVE PERIODS. THE SOLE OBLIGATION OF WARRANTOR UNDER THESE WARRANTIES IS TO REPLACE OR REPAIR THE COMPONENT OR PART WHICH PROVES TO BE DEFECTIVE WITHIN THE SPECIFIED TIME PERIOD, AND WARRANTOR IS NOT LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES. NO WARRANTOR DEALER, AGENT, REPRESENTATIVE, OR OTHER PERSON IS AUTHORIZED TO EXTEND OR EXPAND THE ARRANTIES EXPRESSLY DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty lasts or
exclusions or limitations of incidental or consequential
damage, so the limitations and exclusions in this warranty may not apply to
you. This warranty gives you specific legal rights, and you may have other
rights which vary from state to state. This warranty applies to consumer-owned
installations only.
Non-potable Water Sources: Do not attempt to use this product to make safe
drinking water from non-potable water sources. Do not
use the system on microbiologically unsafe water, or water of unknown quality
without an adequate disinfection before or after the
system. This system is certified for cyst reduction and may be used on
disinfected water that may contain filterable cysts.
Arsenic Reduction: This system shall only be used for arsenic reduction on chlorinated water supplies containing detectable residual free chlorine at the system inlet. Water systems using an inline chlorinator should provide a one minute chlorine contact time before the reverse osmosis system.
Nitrate/Nitrite Test Kit: This system is acceptable for treatment of influent
concentrations of no more than 27mg/L nitrate and 3mg/L
nitrite in combination measured as N. It is certified for nitrate/nitrite
reduction only for water supplies with a pressure of 280 kPa (40
psig) or greater. This system is supplied with a nitrate/nitrite test kit.
Product water should be monitored periodically according to the
instructions provided with the test kit.
TDS Test Kits: TDS test kits are available by calling
1-800-949-8220 or check the water
testing section of your local phone directory.
Installations In The Commonwealth Of Massachusetts: The Commonwealth of
Massachusetts requires installation be performed
by a licensed plumber and do not permit the use of saddle valves. Plumbing
code 248-CMR of the Commonwealth of Massachusetts
must be followed in these cases.
Product Water Testing: The Reverse Osmosis system contains a replaceable
treatment component critical for the effective reduction
of total dissolved solids. Product water should be tested periodically to
verify that the system is performing properly.
Replacement of the reverse osmosis component: This reverse osmosis system
contains a replaceable component critical to the
efficiency of the system. Replacement of the reverse osmosis component should
be with one of identical specifications, as defined by the manufacturer, to
assure the same efficiency and contaminant performance.
Inspect Shipment
Your Reverse Osmosis Drinking Water System is shipped complete in one carton.
Remove all items from your shipping carton.
Check all items against the packing list below. Note any items lost or damaged
in shipment.
Note any damage to the shipping carton. Refer to the exploded view and parts list in the back of the manual for the part names and numbers of missing or damaged items. If problems exist, refer to the website or the toll free number listed throughout this manual.
Keep the small parts in the parts bag until you are ready to install them.
NOTE: Codes in the state of Massachusetts require installation by a licensed plumber and do not permit the use of saddle valves.
If you live in the state of Massachusetts, review plumbing code 248-CMR of the Commonwealth of Massachusetts before proceeding with the installation.
Packing List
Do not return the unit to store.
If you have any questions, or there are missing parts or damage, please call
Toll Free 1-866-986-3223, Monday –
Friday, 8 am – 7 pm EST, or visit www.whirlpoolwatertreatment.com When you
call, please be prepared to provide the model, date code and serial number,
found on the rating decal, located inside the cover.
Tools Needed
Review the tools needed list. See Fig. 3. Gather needed tools before proceeding with the installation. Read and follow the instructions provided with any tools listed here.
Plan Your Installation
Read through the entire manual before beginning your installation. Follow all
steps exactly. Reading this manual will also help you get all the benefits
from your system.
Your Reverse Osmosis Drinking Water System can be installed under a sink or in a remote location. Typical remote sites are a laundry room or utility room. Review the location options below and determine where you are going to install your system.
UNDER THE SINK LOCATION
The Reverse Osmosis Filter Assembly and storage tank may be installed in a
kitchen or bathroom sink cabinet. See Fig. 4. A suitable drain point is needed
for drain water from the Reverse Osmosis system.
REMOTE INTERIOR LOCATION
The Reverse Osmosis Filter Assembly and storage tank may also be installed in
a remote interior location away from the Reverse Osmosis Faucet. You will need
a nearby water source and drain point. See Fig. 5.
CHECK SPACE REQUIREMENTS
Check size and position of items for proper installation into location chosen.
NOTE: For best system performance, the feed water to the system should be softened or have hardness less than 10 grains per gallon, with no iron.
Questions about your Whirlpool WHER25 Manual ? Post in the comments!
Download Whirlpool WHER25 Manual Manual
[PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>