LIUP LP1 Truly Wireless Earbuds User Manual

LIUP LP1 Truly Wireless Earbuds

How It Glows

Absorbing Light
After exposure to natural light, artificial light, or ultraviolet light, the energy is stored and can be released when in a darker environment. A few minutes of exposure can lead to full saturation.

Light Emission
In surroundings with lower light intensity than the luminous brightness of the night light quicksand, you can observe its beautiful luminous effect. The darker the environment, the better the effect.

Notice

• Best absorption effect under sunlight and strong light (UV).
• Different light intensity and absorption time will result in varying glow duration.
• Static electricity may cause sand adhesion inside the shell, which is normal.
• Air bubbles inside the shell due to atmospheric pressure are normal and not leakage.
• Luminous quicksand is safe, environmentally friendly, non-radioactive, and harmless.

SHINE WITH ULTRAVIOLET LIGHT
Exposed to sunlight or intense light sources like UV lamps for a few minutes, the glow effect can be seen in the dark
There might be bubbles when it’s cold they disappear when heated.

Contents

• Bluetooth earphone body L/R x1
• Charging case x1
• Data cable x1
• Product manual x1
• Exquisite packaging box x1

Touch Control

Operational Definitions

Light Indicators

• Earbuds
  • Fully charged  Green
  • Battery level ‹ 100%    White
  • Battery level ‹ 10%     Orange
• Charging case
  • Fully charged  Blue
  • Battery level ‹ 100%    White
  • Battery level < 10%     Orange

Product Specifications

Product

• Name: LIUP Pods
• Model: LP1
• Bluetooth version: V5.4 + EDR

Appearance

• Color: White / Black
• Earphone size: 19.7×17.6×38.0mm
• Charging case size: 53.4×34.0×66.4mm
• Total weight: Approximately 85.0g
• Earphone weight: Approximately 4.00 g

Sound Communication

• Speaker unit: @13.0mm dynamic driver unit:
• Diaphragm material: PEEK+PU composite diaphragm
• Audio codec: AAC/SBC/A2DP/AVRCP/HFP/HSP
• Microphone:  2 MIC
• Frequency response:  20Hz-20KHz
• Noise-cancellation for calls:  Al+2MIC+DNN call noise reduction

Battery Life Charging

• Charging interface: Туре- С
• Earphone battery capacity: 30 mAhx2
• Charging case battery capacity: 370 mAh
• Battery life: = 6 (Earphone) + ≥ 28 (Case) Hours

Quick Setup

Connecting to Your Phone

• Power On/Off
  • Power On: Open the charging case (Touch and hold for 10s).
  • Power Off: Put the earbuds back into the charging case.
• Bluetooth pairing

1. Remove earbuds from charging case for pairing.
2. Go to phone Settings – Bluetooth Search for “LIUP Pods” – Connect.
3. Once connected, start using the earbuds.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>