Hisense RF728N4SASE Fridge Freezer User Manual
- June 13, 2024
- Hisense
Table of Contents
Hisense RF728N4SASE Fridge Freezer
Before operating this unit, please read this manual thoroughly, and retain for future reference RF728N4SASE
Product Information:
Thank you for choosing the Hisense refrigerator. This user manual contains important information about the installation and usage of the product. Please read the instructions carefully to ensure proper usage and keep this manual for future reference.
Refrigerator Safety:
- Proper Disposal of Your Old Refrigerator:
- Suffocation Hazard – Remove doors from your old refrigerator. Failure to do so can result in death or brain damage.
- Before You Throw Away Your Old Refrigerator or Freezer:
- Take off the doors.
- Leave the shelves in place so that children may not easily climb inside.
- Important information to know about disposal of refrigerants:
- Dispose of refrigerator in accordance with Federal and Local regulations.
- Refrigerants must be evacuated by a licensed, EPA certified refrigerant technician in accordance with established procedures.
Parts and Features:
- Fridge
- 2 STAR Freezer
- A – Refrigerator LED Light
- B – Refrigerator Door Bin
- C – Ice-Maker
- D – Rotary Separator
- E – Glass Shelf
- F – Refrigerator Side Light
- G – Storage Drawer
- H – Water Storage Box
- I – My Fresh Choice Drawer
- J – Freezer Drawer
- K – Down Freezer Drawer
- L – Fridge Door Left
- M – Fridge Door Right
- N – My Fresh Choice Door
- O – Freezer Door
- P – Leveling Leg
- QQ – Wi-Fi Module
- NOTE : Your model may look different from this and other images in this manual, depending on your model’s features.
- NOTE : To get the best energy efficiency of this product, please place all shelves, drawers on their original position as the illustration above.
Installation Requirements:
Location Requirements:
-
Risk of fire/flammable materials – Keep flammable materials and vapors, such as gasoline, away from the appliance. Failure to do so can result in death, explosion, or fire.
-
Temperature: Exterior and Dimensions 914mm, 725mm Refrigerator
doors, My fresh choice door, Freezer door -
Ventilation: 1785mm
-
Electrical Shock Hazard:
- Plug into a grounded 3-prong outlet.
- Do not remove the ground prong from the power cord plug.
- Do not use an adapter.
- Do not use an extension cord.
- Recommender Grounding Method AC 220-240 volt, 50 Hz, AC only 15- or 20-amp fused, grounded electrical supply is required.
- It is recommended that a separate circuit serving only your refrigerator is provided.
- Use an outlet that cannot be turned off by a switch.
- NOTE : Before performing any type of installation or cleaning, disconnect the refrigerator from the electrical source. When you have finished, reconnect the refrigerator to the electrical source and reset the temperature controls to the desired setting.
Unpack the Refrigerator:
Door Removal (only if needed)
Before operating this unit, please read this manual thoroughly, and retain for
future reference
RF728N4SASE
Thank you for choosing Hisense. We are sure you will find your new
refrigerator a pleasure to use. However, before you use the appliance, we
recommend that you carefully read the instructions, which provide details
about installing and using the product. Please keep this manual for future
reference
Refrigerator Safety
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages. A This is the safety
alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and
others. All safety messages will follow the safety alert symbol and either the
word ‘DANGER,” ‘WARNING” or ‘CAUTION.”
These words mean:
- An imminently hazardous situation. You could be killed or seriously injured if you don’t immediately follow instructions.
- A potentially hazardous situation which, if not avoided, could result in death or serious bodily injury.
- A potentially hazardous situation which, if not avoided, may result in moderate or minor injury.
- All safety messa~es will tell you what the potential hazard is, tell you how to reduce the chance of inJury, and tell you what can happen if the instructions are not followed.
Safety and warning information
- For your safety and correct usage, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to make sure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and be sure that they remain with the appliance if it is moved or sold, so that anyone using it throughout its life, will be properly informed on its usage and safety notices.
- For the safety of life and property, keep the precautions of these user1s instructions as the manufacturer is not responsible for damages caused by omission
Safety for children and others who are vulnerable people
-
According to EN standard
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances. -
According to IEC standard
This appliance is not intended for use by persons
(including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. -
Children should be supervised to ensure that they do not play with the appliance.
-
Keep all packaging away from children as there is risk of suffocation.
-
If you are discarding the appliance, pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent children playing from suffering an electric shock or from closing themselves inside it.
-
If this appliance, featuring a magnetic door seals, is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make the spring lock unusable before you discard the old appliance. This will prevent it from becoming a death trap for a child.
General safety
- This appliance is intended to be used in household and similar applications such as
- staff kitchen areas in shops, offices and other working environments;
- farm houses and by clients in hotels, motels and other residential-type environments;
- bed and breakfast type environments;
- catering and similar non-retail applications.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- WARNING – Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- WARNING – Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- WARNING – Do not damage the refrigerant circuit.
- WARNING – Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
- The refrigerant and insulation-blowing gas are flammable. When disposing of the appliance, do so only at an authorized waste disposal centre. Do not expose to flame.
- WARNING -When positioning the appliance, ensure the supply cord is not trapped or damaged.
- WARNING- Fill with potable water only for the water container.
- WARNING -Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
Replacing the LED
WARNING-The LED light must not be replaced by the user! If the LED light is damaged, contact the customer helpline for assistance.
Refrigerant
-
The refrigerant circuit isobutene of the (R600a) appliance, is a contained natural gas with a high level of environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, ensure that none of the components of the refrigerant circuit becomes damaged.
-
The refrigerant (R600a) is flammable.
- WARNING – Refrigerators contain refrigerant and gases in the insulation. Refrigerant and gases must be disposed of professionally as they may cause eye injuries or ignition. Ensure that tubing of refrigerant circuit is not damage prior to the proper disposal.
-
Warning: Risk of fire1flammable materials
If the refrigerant circuit should be damaged:- Avoid opening flames and sources of ignition. Thoroughly ventilate the room in which the appliance is situated.
- It is dangerous to alter the specifications or modify this product in any way.
- Any damage to the cord may cause a short circuit, fire, and/ or electric shock.
Electrical safety
- The power cord must not be lengthened.
- Make sure that the power plug is not crushed or damaged. A crushed or damaged power plug may overheat and cause a fire.
- Make sure that you can access the main plug of the appliance.
- Do not pull the main cable.
- If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire. You must not operate the appliance without the interior lighting lamp cover.
- The fridge is only applied with power supply of single phase alternating current of 220~240V /50Hz. If the fluctuation of voltage in the district of user is so large that the voltage exceeds the above scope, for safety sake, be sure to apply A.C. Automatic voltage regulator of more than 350W to the fridge. The fridge must employ a special power socket instead of a common one with other electric appliances. Its plug must match the socket with ground wire.
Daily use
- Do not store flammable gases or liquids in the appliance,There is a risk of an explosion.
- Do not operate any electrical appliances in the appliance (e.g.electric ice cream makers, mixers etc.).
- When unplugging always pull the plug from the mains socket,do not pull on the cable.
- Do not place hot items near the plastic components of this appliance.
- Do not place food products directly against the air outlet on the rear wall.
- Store pre-packed frozen food in accordance with the frozen food manufacturer’s instructions.
- The appliance manufacturers’ storage recommendations should be strictly adhered to.Refer to relevant instructions for storage.
- Do not place carbonated or fizzy drinks in the freeze compartment as it creates pressure on the container,which may cause it to explode,resulting in damage to the appliance.
- Frozen food can cause frost burns if consumed straight from the freezer compartment.
- Do not place the appliance in direct sunlight.
- Keep burning candles, lamps and other items with naked flames away from the appliance so that do not set the appliance on fire.
- The appliance is intended for keeping food stuff and/or beverages in normal households as explained in this instruction booklet The appliance is heavy.Care should be taken when moving it.
- Do not remove nor touch items from the freezer compartment if your hands are damp/wet,as this could cause skin abrasions or frost/freezer burns.
- Never use the base, drawers, doors etc. to stand on or as supports.
- Frozen food must not be refrozen once it has been thawed out.
- Do not consume ice popsicles or ice cubes straight from the freezer as this can cause freezer burn to the mouth and lips.
- To avoid items falling and causing injury or damage to the appliance, do not overload the door racks or put too much food in the crisper drawers.
- WARNING- Food needs to be packed into bags before it is put into the refrigerator. Liquids need to be stored in bottles or capped containers in order to avoid a spill, as the design structure of the product is not easy to clean.
- This refrigerating appliance is not intended to be used as a built-in appliance.
Care and cleaning
- Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket.
- Do not clean the appliance with metal objects, steam cleaner, ethereal oils, organic solvents or abrasive cleansers.
- Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.
Installation Important
- For electrical connection carefully, follow the instructions given in this manual.
- Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In this case retain packing.
- It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor.
- Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve sufficient ventilation, follow the instructions relevant to installation. Wherever possible the back of the product should not be too close to a wall to avoid catching warm parts (compressor, condenser) to prevent the risk of a fire, follow the instructions relevant to installation. touching or catching warm parts (compressor, condenser) to prevent the risk of a fire, follow the instructions relevant to installation.
- The appliance must not be locate close to radiators or cookers.
- Make sure that the mains plug is accessible after the installation of the appliance
Service
- Any electrical work required to do the servicing of the appliance should be carried out by qualified electrician or competent person.
- This product must be serviced by an authorized Service Center, and only genuine spare parts must be used.
- If the appliance is Frost Free.
- If the appliance contains freezer compartment.
Proper Disposal of Your Old Refrigerator
Suffocation Hazard Remove doors from your old refrigerator. Failure to do so
can result in death or brain damage.
IMPORTANT : Child entrapment and suffocation are not problems of the
past. Junked or abandoned refrigerators are still dangerous– even if they will
sit for “just a few days.” If you are getting rid of your old refrigerator,
please follow these instructions to help prevent accidents.
Before You Throw Away Your Old Refrigerator or Freezer:
- Take off the doors.
- Leave the shelves in place so that children may not easily climb inside.
Important information to know about disposal of refrigerants:
Dispose of refrigerator in accordance with Federal and Local regulations.
Refrigerants must be evacuated by a licensed, EPA certified refrigerant
technician in accordance with established procedures.
Parts and Features
- Refrigerator LED Light
- Refrigerator Door Bin
- Ice-Maker
- Rotary Separator
- Glass Shelf
- Refrigerator Side Light
- Storage Drawer
- Water Storage Box
- My Fresh Choice Drawer
- Freezer Drawer
- Down Freezer Drawer
- Fridge Door Left
- Fridge Door Right
- My Fresh Choice Door
- Freezer Door
- Leveling Leg
- Wi-Fi Module
NOTE:
Your model may look different from this and other images in this
manual,depending on your model’s features.
NOTE:
To get the best energy efficiency of this product, please place all shelves,
drawers on their original position as the illustration above.
Installation Requirements
Location Requirements
Risk of fire/ flammable materials Keep flammable materials and vapors,such as
gasoline,away from appliance. Failure to do so can result in death,explosion
or fire.
IMPORTANT : This refrigerator is designed for indoor. household use only.
Temperature
This refrigerator is intended for use in a location where the temperature ranges from a minimum of l 6°C to a maximum of 43°C. The preferred room temperature range for optimum performance. which reduces electricity usage and provides superior cooling. is between l 6°C and 32°C. It is recommended that you do not install the refrigerator near a heat source. such as an oven or radiator
Exterior and Dimensions
- Refrigerator doors
- My fresh chioce door
- Freezer door
Ventilation
- Adequate air circulation around the refrigerator is required for efficient operation.
- To ensure proper ventilation. maintain the recommended clearances
Recommender Clearances
- 100mm Above
- 50mm Behind
- 50mm Each Side
NOTE : If you place the refrigerator next to a fixed wall. leave 1471.4mm minimum space to allow the door to swing open.
Electrical Requirements
Electrical Shock Hazard
- Plug into a grounder 3 prong outlet.
- Do not remove the ground prong from the power cord plug.
- Do not use an adapter.
- Do not use an extension cord.
- Failure to do so can result in death,fire or electrical shock.
Before you move your refrigerator into its final location. it is important to make sure you have the proper electrical connection.
Recommender Grounding Method
AC 220-240 volt, 50 Hz, AC only 15- or 20-amp fused, grounded electrical
supply is required. It is recommended that a separate circuit serving only
your refrigerator is provided. Use an outlet that cannot be turned off by a
switch. Do not use an extension cord.
NOTE : Befor performing any type of installation or cleaning, disconnect
the refrigerator from the electrical source. When you have finished, reconnect
the refrigerator to the electrical source and reset the temperature controls
to the desired setting
Unpack the Refrigerator
Fire or Exploslon Hazard
- Do not puncture refrigerant tubing.
- Follow handling instructions carefully.
- Flammable refrigerant used.
- Failure to do so can result in deaH’I, explosion or fire.
IMPORTANT : Handle with care when moving refrigerator to avoid either damaging the refrigerant tubing or increasing the risk of a leak.
WARNING
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
Remove the Packaging
-
Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.
NOTE : Do not use sharp instruments. rubbing alcohol, flammable fluids. or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information. see “Refrigerator Safe1y.’ -
Dispose of/recycle all packaging materials.
-
If the refrigerator has been placed in a horizontal or tilted position for any period of time wait 4 hours before plugging it in to allow the oil to settle into the compressor.
When Moving Your Refrigerator:
- Your refrigerator is heavy. When moving the refrigerator for cleaning or service. be sure to cover the floor with cardboard or hardboard to avoid floor damage. AhNays pul the refrigerator straight out when moving it.
- Do not wiggle or ·walk. the refrigerator when trying to move it. as floor damage could occur.
Clean Before Using
After you remove all of the packaging materials. clean the inside of the
refrigerator before using it. See the cleaning instructions in “Refrigerator
Core:
Important London to know about glas shelves end covers:
Do not clean glass shelves or covers with warm water when they ore cold.
Shelves and covers may break if exposed to sudden temperature changes or
impact, such as bumping. Tempered glass is designed to shatter into mony
small, pebble-size pieces. This is normal. Glass shelves and covers ore heavy.
Use both hands when removing them to avoid dropping.
Installation Positioning
This application perform well from SN to ST.
The Appliance may not work properly if it is left for a longer period at a
temperature above or below the indicated range
Door Removal (only if needed)
Measure the refrigerator to make sure it will fit through the doorway. If the refrigerator cannot pass easily through the doorway. follow the instructions to remove the two refrigerator compartment doors and the front panel of the freezer drawer
Electrlcal Shock HIIZllrd
Disconnect power before removing doors. Reconnect ground wire before
operating. Failure to do so could result in death or electric shock.
Tools you will need (Not provided)
Remove the Doors
IMPORTANT : Keep the refrigerator doors closed until you are ready to
lift them from the cabinet.
- Unplug refrigerator or disconnect power.
- Using a Phillips screwdriver, remove the three screws attaching the hinge cover, and then remove the hinge cover with the entire harnesses attached.
- Separate the two connectors on the left side door. To remove the wire connector, press the top of the connector (B) and separate it from the other one. To remove the water coupler from the hinge. twist and pull the clips from the coupler.
- Remove the water line (C) while pressing the movable part (D) of the water line coupler.
- Remove the 3 screws (E) fixed on the hinges, with a Wrench (8mm) and l ground screws (F) attached to the hinge with Philips ( +) screwdriver. Remove the upper left door hinge (G).
- Use your both hands to open the door more than 90°. Lift it up and take it off
- If necessary. remove the 2 hex head bolts hinges (I) with an Allen wrench (5 mm).Remove the lower left door hinge (H).
Replace the Doors
-
If removed. reinstall the bottom hinge.
-
Using two or more people. set the refrigerator door onto the bottom hinge.
-
Insert the top hinge into the top of the door.
-
Using the three screws removed earlier, fasten the top hinge to the top of the cabinet.
NOTE : Left-hand door only, replace the ground screw into the top hinge, reattach the wire harness. reconnect the water line. make sure the clips are properly connected to the coupler. -
Repeat steps l through 4 to replace the opposite door.
-
Using the three screws removed earlier. reinstall the top hinge cover and control panel to the top of the cabinet.
Use of water storage box
- The user pulls out the ice box in the direction of the arrow
- Open the lid of the ice box and add water to it
- Close the lid and push back into the ice box in the direction of the arrow
- The ice box can hold up to 4.2L of water.
- If the water storage box is not in place, the icon“ ”on the control panel flashes.
- If the user has more than 7 days of travel planned,it is recommended to clean the ice.
- When the tank is repositioned,the pump will reverse the water from the ice maker. After about a minute,a few drops of water will fall out of the ice outlet, which is normal.
Complete the Installation
WARNING Electrical Shock Hazard Plug into a grounded 3-prong outlet. Do
not remove the ground prong from the power cord plug. Do not use an adapter.
Do not use an extension cord. Failure to do so can result in death, fire or
electrical shock.
-
Plug into a grounded 3-prong outlet.
NOTE : This refrigerator begins operating as soon as it is connected to the power supply. -
Move the refrigerator into its final location, making sure to maintain the recommended clearance.
Level Refrigerator (if needed)
The refrigerator must be level to maintain optimal performance and appearance.
- Tum the leveling feet on the bottom. front of the cabinet to raise or lower that side of the refrigerator until the refrigerator is level side to side.
- Tum both feet by the some amount, to slightly raise the front of the refrigerator. This will make it easier for the doors to close
NOTE : Having someone push against the top of the refrigerator takes some weight off the leveling feet. This makes it easier to tum the feet. Rotate the adjustable feet clockwise to raise or counter-clockwise to lower your refrigerator. To make sure that the doors close automatically. tilt the top of your refrigerator backward about 10mm to 15mm. If necessary. use a spanner wrench to adjust the feet.
Align Doors (if needed)
The gaskets are used to align doors, you can find them in the manual bag
Opening and Closing Doors
Providing room for doors to open
Make sure that you have enough room in front of your refrigerator to swing the
doors open
The four doors can be opened and closed either separately or together.
- There is a mullion on the left-hand side refrigerator compartment door.
- When closing the left-hand door. the mullion folds behind the right-hand door joining the two doors.
- The temperature of the door frame is controlled to help prevent moisture from developing on the mullion. The temperature of the surface may be warm. which is normal. and will not affect the performance of the refrigerator
NOTE : Before closing the left-hand door. make sure the mullion is folded inward. If the mullion is pulled outward it may become damaged when you try to close the door
When the appliance is powered on for the first time, the backlighting of the icons on the display panel starts working. If no buttons have been touched and the doors are closed, the backlighting will turn off after 60 seconds
Caution!
When you set a temperature, you set an average temperature for the whole
Refrigerate cabinet. Temperatures inside each compartment may vary from the
temperatures displayed on the panel, depending on how much food you store and
where you place it. High or low room temperature may also affect the actual
temperature inside the appliance.
Alarm Child Lock and Door
This button serves two purposes:
-
Child Lock
Press and hold Alarm key for 3 seconds to lock the all the Control Panel including dispenser function. If Control panel is locked, the icon" "will be on, and none of the key on the Control panel work. To unlock the Control panel, please press and hold Alarm key for 3 seconds again. -
Door Alarm
In case of alarm," "icon will flicker and a buzzing sound will be heard. Touch Alarm key to clear alarm, then the" "icon will stop flickering and keep on, the buzzing will stop at the same time. When the door of fridge, variation or freezer is open over 2 minutes, the door alarm will come on. The" " icon will flicker, the control panel will display " dr " , and you will hear a buzzer sound. The buzzer will sound 3 times per minute and will stop after 8 minutes. Also it can be stopped by closing all the doors. When Child Lock is off, and the doors are open, you can turn alarm off by touching Alarm key.
Note : To save energy, please avoid keeping doors open for a long time when using Refrigerate.
Ice Off
This key controls the ice maker. You can touch Ice Off key to control the ice
maker. When the Child Lock is off, and the ice function is on, you can touch
the Ice Off key to lock the ice maker, and the icon" " will be illuminated. If
you want to unlock the ice maker, please touch the Ice Off key again, and the
icon" "will be off.
Note : When the" "is on, it only lock the ice maker not the dispenser
Fridge temperature control
- You can touch the Fridge key to activate the mode to control the fridge temperature. When you touch the key continuously, the temperature will be set in the following sequence.
- If you want to decrease the time needed to cool products in the Fridge, please touch and hold this key for 3 seconds, the super cool icon " " will be illuminated, the fridge temperature setting will display 2℃.
- Super cool automatically switches off after 3 hours, and the Refrigerate temperature setting will revert back to the previous setting.
- When super cool function is on, you can touch the Fridge key to switch it off. The fridge will not retain the Super Cool function when power off.
Note : On the Super Cool function, when you touch the Eco key, Eco function will be activated, and Super Cool mode will be off.
Freezer temperature control
- You can touch the Freezer key to activate the mode to control the freezer temperature. When you press the key continuously, the temperature will be set in the following sequence.
- Press and hold the Freezer key for 3 seconds, the icon " " will be illuminated the freezer temperature setting displays -24℃.
- Super Freeze can quickly lower the temperature and freeze your food faster than usual. This can retain more of the vitamins and nutrition in fresh food and keep your food longer.
- Super freeze automatically switches off after 52 hours, and the freezer temperature setting will revert back to the previous setting.
- When the super freeze function is on, you can touch Freezer key to switch off the Super Freeze function. And it will not retain the Super Freeze function when power off.
- To freeze fresh food activate the SuperFreeze function at least 24 hours before placing the food to complete pre-freezing
Note:
- On the Super Freezer Function, when you touch the Eco Key, Eco function will be activated, and Super Freezer mode will be off.
- When selecting the Super Freeze function. ensure there are no bottles in the freezer compartment. Bottles and cans may explode.
My Fresh Choice Temperature Control
You can touch the My Fresh Choice key to activate the mode to control the
convertible compartment temperature.
When you press the button continuously, the temperature will be set in the
following sequence
Dispenser control
When the Child Lock is on, the dispenser will not work. When the Child Lock is
off, You can press the “Cubed” or “Crushed” option to choose the type of Ice
to be dispensed, and press the “Water” button will activate the water mode. If
you choose the function of cubed, the ” ” icon will be illuminated; If you
choose the function of Crushed, the" "icon will be illuminated, and the" "icon
will be illuminated when Water function be chose.If you don’t need ice, turn
the function off to save on water and energy consumption. (See Ice Off above.)
Eco
You can touch this key to turn Eco mode on and off.When you turn Eco on,the
Eco icon " "lights. The temperature of the fridge is automatically switched to
6℃ and the freezer to -17℃. If Eco mode is off, the icon" "will go off and the
temperature setting will revert back to the previous setting.
Tank reset icon
If the water tank is not installed in place, the icon will flicker. If the
water tank is installed in place, the icon" "will be extinguished. when the
icon " " flicker , long press the Eco key 3 seconds to cancel tank alarm and
the icon will be extinguished.
Note : If you need to make ice, you still need to put the tank in place
Demo mode
Demo mode is for store display, and it prevents the Refrigerate from generating cool air. In this Cooling off Mode, the Refrigerate may seem like it is working but it not make cool air. The indicators on the control panel will show "OF". To cancel this mode, press and hold " Alarm " and " WI-FI " keys at the same time for 3 seconds and buzzing a long sound.
Wi-Fi function
This appliance may be controlled remotely with a smart phone or a tablet computer. If the appliance is not connected to the home network, it will function like a regular appliance. What do you need to connect the appliance?
- Signal from the local wireless network (Wi-Fi) should be sufficiently strong in the spot where the appliance is installed.
- Home network router has to be connected to the internet, and the Wi-Fi function on the appliance should be activated.
- The smart phone/tablet computer has to be connected to the internet. Operating system on your smart phone/ tablet computer should be compatible with the ConnectLife app.
ConnectLife App
The ConnectLife App is available to download free of charge from the Apple App
Store or from the Google Play Store
Installing the ConnectLife app
- Go to the App Store (on Apple devices), AppGallery (on Huawei devices) or Google Play Store (on Android devices) on your phone/tablet computer.
- Search for ” ConnectLife”.
- Choose the ConnectLife app and install it on your smart phone/tablet computer
INFORMATION!
We recommend downloading and installing the mobile app and creating a
ConnectLife account before attempting to set up the connection with your
appliance.
CONNECT APPLIANCE TO Wi –Fi
After activating the Wi-Fi function, connect your device to your home router
in order to connect your appliance with the ConnectLife mobile app.
- Step 1: Set the appliance to normal operation. Touch the Wi-Fi key for approximately 3 seconds. You entered network connection menu when ‘–‘ appears in the display.
- Step 2: Touch the Fridge key to select ‘ 0 ‘ within 6 0 seconds.
- Step 3: Touch the Wi-Fi key to confirm the selection mode. The Wi-Fi symbol starts blinking and the network of this appliance is now open to connect to, for 5 minutes.
- Step 4: When the Wi-Fi symbol is on, it means that the Wi-Fi connection is successful. The display will return to normal
PAIR APPLIANCE
The appliance can be paired with your mobile device. Simply pair another user
to your appliance. This requires, that your appliance was already set up
before and is connected to your home network. If not, go back and select.
CONNECTION SETUP.
- Step 1: Set the appliance to normal operation. Touch the Wi-Fi key for approximately 3 seconds. You entered network connection menu when ‘ — ‘.
- Step 2: Touch the Fridge key to select ‘ P ‘ within 60 seconds.
- Step 3: Touch the Wi-Fi key to confirm the selection mode. The PAIR network of this appliance is now open to connect to, for 5 minutes.
- Step 4: When the display returns to normal, it means the PAIR connection is successful.
UNBIND ALL PAIR APPLIANCE
By activating this function, the appliance will be removed from all paired app user accounts.
- Step 1: Set the appliance to normal operation. Touch the Wi-Fi key for approximately 3 seconds. You entered network connection menu when ‘ — ‘ appears in the display.
- Step 2: Touch the Fridge key to select ‘ 88 ‘ within 60 seconds.
- Step 3: Touch the Wi-Fi key to confirm the selection mode to realize unbinding.
- Step 4: After the device is unbound, it will automatically enter the distribution network state, the Wi-Fi icon flashes, and the distribution network time is up to 5 minutes.
Features
Important information to know about glass shelves and covers: Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping.
Refrigerator
IMPORTANT : To avoid damage to the doors, make sure all shelves and
drawers are pushed fully into the cabinet before closing a door.
Adjustable Shelves
The height of the shelves can be adjusted to fit your storage needs.
- To remove a shelf, gently lift upward and then pull the shelf forward until the end of the shelf passes the rail support.
- To reinstall a shelf, gently slide the shelf back into the refrigerator compartment, and lower the shelf onto the rail support.
Removable door bins
The bins located in the middle of the door are adjustable.
To Remove and Replace a Door Bin:
- Place hands on both sides of the bin and lift upward.
- Pull the door bin out.
- Replace the door bin by inserting it above the support and pressing down to snap into place.
NOTE: The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well- maintained.
Removing/Replacing freezer drawer
NOTE : Unscrew the drawer before taking it out.
- Pull out drawer to maximum extension.
- Lift up to remove the drawer.
- Reverse steps 1 and 2 to replace the drawer.
Getting cold water and ice
Push the appropriate ice or water type button to select what you want to dispense.
Getting cold water
The water dispenser is located in the fridge door. To get water, push the
water button. Then move your glass down to the dispenser lever (A) in the
suggested position and press it.
Getting ice
To get ice, push the cubed or crushed ice button as required. Then move your
glass down to the dispenser lever in the suggested position and press it
.
Making ice
To fill the ice bucket to maximum capacity after installation, follow these
steps:
- Allow your refrigerator to operate and cool down for 24 hours (or 1 full day). Waiting 24 hours will allow your ice maker to cool properly.
- Dispense 4 to 6 ice cubes into the glass.
- After 8, and then 16 hours, dispense a full glass of ice.
Warning:
Do not put food in the ice bucket. If you store food in the ice bucket, the
food can strike the ice maker when you open or close the door, causing damage
to the ice maker.
Note that the ice cubes in the ice bucket may spill out over the drawer. If
this occurs, be sure to clear the ice cubes that spilled out of the drawer.
If a power failure occurs, ice cubes may melt, and then freeze together when
the power comes back on, causing the dispenser to stop working.
To prevent this problem, after a power failure, pull out the ice bucket and
residual ice or water.
Note:
- Don’t push the water dispenser lever forward without a cup below since it may cause water spilling.
- To avoid cold air leaking out from cabinet, keep the water dispenser still installed even if the dispenser is not in use.
Using the ice off function
- When you select the ice off mode, remove all ice cubes from the bucket.
- If you leave the ice cubes in the bucket, the ice cubes may clump together, making it difficult to remove them.
- First, open the door at the maximum Angle.
- Then, lift up on the ice bucket, and pull it straight out in the direction of the arrow.
- To put the ice bucket in, push it firmly straight back. If the bucket does not fit, turn the helix 90 degree (see the the last illustration on the right, below) and try again.
NOTE:
- The inside of the ice bucket is very cold when the refrigerator is operating. Don’t reach deep inside the ice bucket.
- Use only the ice maker provided with the refrigerator. The water supply to this refrigerator must only be installed by a qualified person.
- To operate the ice maker properly, a water pressure of 30-125 psi is required.
Going on vacation
If you have a long vacation or business trip and won’t use the water or ice
dispensers for a long time:
- Close the water valve. Otherwise, water leakage may occur.
- Remove all food.
- Unplug the refrigerator.
- Wipe excess moisture from the inside and leave the doors open. Otherwise, odor and mold may develop.
Warning:
- Do not put your fingers, hands or any other unsuitable objects in the chute or ice-maker bucket.
- It may result in personal injury or material damage.
- Never put your fingers or any other obiects in the dispenser opening. It may cause injury.
- Do not try to disassemble the ice maker.
- Do not wash or spray the ice bucket with water while it is in the refrigerator. Remove it to clean.
Water clouding phenomenon
All water provided to the refrigerator flows through the filter which is an
alkaline water filter. In the filtering process, the pressure of the water
that has flowed out of the filter is increased, and the water becomes
saturated with oxygen and nitrogen. When this water flows out into the air,
the pressure plummets and the oxygen and nitrogen get supersaturated, which
results in gas bubbles. The water may temporarily look misty or cloudy due to
these oxygen bubbles. After a few seconds, the water will look clear.
Cleaning
After using for a period, water accumulated in receiving tank might overflow,
thus you should clean it with dry towel regularly to avoid water spilling out
onto the floor.
NOTE:
In case of stained by dust or other pollutant, dispensing water with
unpleasant smell, etc., water dispenser parts should be cleaned thoroughly.
Using your fridge compartment
The refrigerator compartment is suitable for storage of vegetables and fruit. Food inside should be packed to store in order to avoid losing moisture or flavor permeating into other foods.
Caution
Never close the refrigerator door while the shelves, crisper and/or telescopic
slides are extended. It may damage both them and the refrigerator.
Door baskets
- The refrigerator compartment is provided with several different door baskets, which are suitable for the storage of canned liquid, bottled drinks and packed food.
- To remove the door baskets (A), simply lift the racks up and pull straight out.
- To relocate the door baskets (A), slide them in above the desired location and push down until them stop
- To remove the door baskets (B), take the right side of the baskets out by lifting it at an angle along the guide, and then take the left side out by pulling it from the door.
- To relocate the door baskets (B), slide them into the original location and push down until them sticks.
Warning:
Do not place too many heavy things in the baskets. Before you lift up the door
shelf vertically, please take the food out.
Glass shelves
To remove the glass shelves, tilt up the front of the shelf shown in Pagel9
(1) and lift it up vertically shown in Pagel9 (2). Then pull the shelf out.
General Use Information
- When first turning on refrigerator after a period of non-use, allow the refrigerator to cool at least 2 hours before adding food.
- Do not block air circulation vents with stored items.
- Store items so that the air can circulate freely around them.
- Cover or wrap stored food well to avoid transfer of odors.
- Once defrosted, food quality will deteriorate rapidly. Defrosted food should not be refrozen.
- Neither bottled nor canned drinks should be stored in the freezer compartment. Bottles and cans may explode.
To avoid contamination of food, please respect the following instructions:
- Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
- Clean regularly the surfaces that can come in contact with food and accessible drainage systems.
- Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
- Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice- cream and making ice cubes.
- Two-star compartments are not suitable for the freezing of fresh food.
NOTE : please store different foods according to the compartments or
target storage temperature of your purchased products. If the refrigerating
appliance is left empty for long periods, switch off, defrost, clean, dry, and
leave the door open to prevent mould developing within
the appliance. Make sure the compliance is checked by regular inspections.
Cleaning
Both the refrigerator and freezer sections defrost automatically. However,
clean both sections about once a month to avoid buildup of odors. Wipe up
spills immediately. To avoid odor transfer and drying out of food, wrap or
cover foods tightly.
WARNING Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion or fire.
IMPORTANT:
- Do not use harsh chemicals, ammonia, chlorine bleach, concentrated detergent, solvents, abrasives or metal scouring pads to clean your refrigerator inside or out. They can damage and/or discolor the refrigerator finish.
- Do not use warm water to clean glass shelves while they are still cold. Glass may break when exposed to sudden temperature changes.
Shelf parts clean
When cleaning the shelf parts, remove the lower shelf parts and place them
horizontally. Either front or back, to prevent the shelf support from falling
off.
If the shelf parts are placed at an angle, their sides will touch the
ground.When the force applied for cleaning is not proper, the shelf bracket
will easily fall off.
Electrical Shock Hazard
Unplug your appliance or disconnect power before cleaning.
Failure to do so can result in death, electric shock or personal injury.
- Unplug refrigerator or disconnect power.
- Clean the interior. Hand wash, rinse, and dry removable parts and interior surfaces thoroughly. Use a clean sponge or soft cloth and a mild detergent in warm water.
- Clean the door seals (gaskets). A dirty or sticky door seal may adhere to the cabinet and tear when you open the door. Using a soft cloth and a solution of mild detergent and warm water, hand wash the door seals. Rinse with clear water and dry thoroughly.
- Clean the exterior surfaces. Wash exterior surfaces with a clean, soft cloth or sponge and a mild detergent in warm water. Rinse surfaces with clean, warm water and dry immediately to avoid water spots.
- Plug in refrigerator or reconnect power.
Lights
This product contains a light source of energy efficiency class G on the top
and side of the refrigerating chamber.
IMPORTANT : Your refrigerator is equipped with LED lighting. These lights are designed to last for the life of your refrigerator. However, if the lights stop operating, please contact a qualified technician for replacement.
Vacation and Moving Care Vacation
If You Choose to Leave the Refrigerator On While
You’re Away:
Use up any perishables and freeze other items. If You Choose to Turn Off the
Refrigerator Before
You Leave:
- Remove all food from the refrigerator and freezer.
- Unplug refrigerator or disconnect power.
- Clean refrigerator, wipe it, and dry well.
- Tape rubber or wooden blocks to the tops of the two doors, and let them open a sufficient distance to let air in. This stops odor and mold from building up.
Moving
Fire or Explosion Hazard
- Do not puncture refrigerant tubing.
- Follow handling instructions carefully.
- Flammable refrigerant used.
- Failure to do so can result in death, explosion or fire.
IMPORTANT : Handle with care when moving refrigerator to avoid either damaging the refrigerant tubing or increasing the risk of a leak.
WARNING
Excessive Weight Hazard Use two or more people to move and install
refrigerator. Failure to do so can result in back or other injury When you are
moving your refrigerator to a new home, follow these steps to prepare it for
the move.
- Remove all food from the refrigerator and pack all frozen food in dry ice.
- Unplug refrigerator.
- Clean, wipe, and dry thoroughly.
- Take out all removable parts, wrap them well, and tape them together so they don’t shift and rattle during the move.
- Raise the leveling legs so they don’t scrape the floor. See “Level Refrigerator.
- Seal the doors with tape and tape the power cord to the back of the refrigerator. When you get to your new home, put everything back and refer to the “Installation Instructions” section for preparation instructions.
Reinstalling/Using Refrigerator Again
If the refrigerator has been placed in a horizontal or tilted position for any
period of time, wait 4 hours before plugging it in to allow the oil to settle
into the compressor.
-
Clean refrigerator. See “Cleaning.”
-
Place refrigerator in desired location and level See “Installation Instructions.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove the ground prong from the power cord plug. Do not use an adapter. Do not use an extension cord. Failure to do so can result in death, fire or electrical shock. -
Plug into grounded 3 prong outlet.
Troubleshooting
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Refrigerator operation
Temperature and Moisture
Disposal of the appliance
It is prohibited to dispose of this appliance as household waste.
Packaging materials
Packaging materials with the recycle symbol are recyclable. Dispose of the
packaging into a suitable waste collection container to recycle it.
Before disposal of the appliance
- Pull out the mains plug from the mains socket.
- Cut off the power cord and discard with the mains plug.
WARNING
Refrigerators contain refrigerant and gases in the insulation. Refrigerant and
gases must be disposed of professionally as they may cause eye injuries or
ignition. Ensure that tubing of the refrigerant circuit is not damage prior to
proper disposal.
Correct Disposal of this product
This symbol on the product or in its packing indicates that this product may
not be treated as household waste. Instead, it should be taken to the
appropriate waste collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by the inappropriate waste
handling of this product. For more detailed information about the recycling of
this product, please contact your local council your household waste disposal
service, or the shop where you purchased the product.
Hisense UK Ltd Ground floor Munroe Court White Rose Office Park Millshaw Park Lane Leeds LS11 0EA