Smart SY-1241 LED TV User Manual
- June 21, 2024
- Smart
Table of Contents
Smart SY-1241 LED TV
Product Information
Specifications
- Compliance : Part 15 of FCC Rules
- Radiation Exposure Limits : FCC approved
- Minimum Distance : 20cm between radiator and body
Product Usage Instructions
Installation
- Place the device on a stable surface.
- Ensure there is a minimum distance of 20cm between the radiator of the device and your body.
- Connect the device to a power source as per the manufacturer’s instructions.
- Power on the device following the power-up sequence provided in the manual.
Operation
- Once the device is powered on, follow the user interface instructions to navigate through the settings.
- Use the device within the recommended distance from your body to comply with FCC regulations.
- Avoid making any changes or modifications to the device that are not explicitly approved by the manufacturer.
Maintenance
Regularly clean the device using a soft, dry cloth to prevent dust buildup.
Avoid using harsh chemicals or solvents for cleaning.
Frequently Asked Questions (FAQ)
-
Q: Can I modify the device for better performance?
- A: No, any changes or modifications not approved by the manufacturer could void your warranty and authority to operate the equipment.
-
Q: What should I do if I experience interference while using the device?
- A: Ensure that the device is operated within the recommended distance from your body and other electronic devices. Contact customer support if interference issues persist.
LED TV
USER MANUAL
Warning
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated dangerous voltage”
within the products enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing
)instructions in the literature accompanying the appliance.
REGULATORY INFORMATION
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions. may cause harmful
interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on. the user encouraged to try to
correct the interference by one or more of the following measures:
- Relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance
could void the user’s authority to operate the equipment.
CAUTION
Do not attempt to modify this product in any way without written authorization
from supplier. Unauthorized modification could void the user’s authority to
operate this product.
Introduction
Controls
-
Match the TV unit into the stand, then hold the TV stand, revolve and lock the tv unit tightly as the arrowhead point.
-
install the TV column in to TV unit, then fix the screws into the TV stand after installing the tv unit and tv stand.
-
VOL+/- : Adjust Volume
-
CH+/- : Select channel
-
MENU : Into or exit from menu (Use CH+/- button select item, VOL+/- button adjust item )
-
SOURCE Source select
-
POWER : Turn on/off TV
-
IR and Power lndicator : IR issued by the receiving REM signals to control the TV; When the green light TV in normal working condition; When the red light TV in standby.
Connection Options
Terminal Interface
Note: The following are the various terminal interface, the actual
position and arrangement, the number of different models may be different.
Remote Control Key Functions
POWER
Press to turn TV set on or off.
AUTO
Press to auto adjust at PC source.
MUTE
Press to mute sound, press again to restore sound.
Press any number of 0-9 buttons to select a TV channel. It has the RECALL function. press number button in other channel ,it can change to TV channel.
Press to set the sleep timer.
Return to the previous channel viewed. Another function is choosing picture playing mode in Multimedia mode.
-
VOL+/-
Press to increase or decrease the volume. -
CH+/.
Press to go to the next higher or lower channel. -
ASPECT
Press to select the aspect ratio. -
FREEZE
Freeze picture. Press again to restore normal viewing. -
DISPLAY
Press to display the source and channel’s information.
Installing Batteries
- Open the battery compartment cover on the back side.
- Insert two 1.SV AAA size batteries in 2 correct polarity. Don’t mix old or used batteries with new ones.
- Close the cover.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Point the remote towards the remote control sensor of the wireless TV and use it within 7 meters.
Put the used batteries into the recycling bin since it can negatively affect the environment.
OPTIONAL
Optional remote control. the specific in kind prevail
Install and connect TV
Set your TV
To put your TV in a firm place which can bear the weight of the TV.
To avoid danger, please don’t expose the TV near water or heating place (such
as light, candle, heating machine), do not block the ventilation at the back
of TV.
Connect Antenna and power
- Connect the antenna cable to the antenna socket on the back of the TV and the your antenna socket.
- To plug the power cord of TV (AC 100-240V- 50/60Hz). Turn On TV
- Press the power button of the TV the indication light will turn to green.
If the is in standby mode(the light is red), press the power button on the remote control or top of the TV.
NOTE Picture for reference purposes only.
Antenna Connection
-
Antenna or Cable Service without a Cable Box Connections
-
For optimum picture quality, adjust antenna direction If needed.
-
1n a poor signal area to improve picture quality, purchase and install a signal amplifier.
-
If the antenna needs to be split for two TV’ s, install a •2-Way signal splitter” in the connections
-
If the antenna is not installed property, Contact your dealer for assistance
NOTE: Before connecting any external equipment, turn OFF all main power for safety.
Terminal interface
Note: The following are the various terminal interface, the actual
position and arrangement, the number of different models may be different.
Setup Wizard
The system setting will appear when you open the TV on the first time. Please
set according to the on-screen guide. Press OK button to start the setup.
Press button to select the language.
Press ◄ / ► button to select select the Store Mode.
Press ◄ I ► button to select Set your TV network.
Press ◄ I ► button to select Connect the TV.
Press ◄ / ► button to select TV viewing guide.
Press button to choose the way you watch TV programs or source: Home
page/ATV/AV1/AV2I HDM11/HDMl2.
Home page
Press button to select Home page in Setup Wizard or press ◄ / ► button to
select Home in the menu of ATV input.
Press / ◄ I ► button to select Movie/TV/HOT APPIFAV APP/MUSIC.
You can choose the program you want on the home page.
SETTINGS
Press / ◄ I ► button to select OTHERS.
Press ◄ / ► button to select the SETTINGS , and press OK button to enter the
System Setting. Press ◄ / ► button to select Network/Time/Commen/System Info.
Network
Press ◄ I ► button to select Network.
Tv Menu
In the Tv source, like the “ATV/AV/HOMING/>: source, press the “menu” key
and show the menu OSD
Picture Mode
Press the remote control’s [ ◄ J I [ ► J to select the mode: Dynamic I
Standard I Soft I User
- Contrast: Adjust the white/black color of the picture, the difference between light and dark
- Brightness: Adjust the overall brightness of the screen
- Sharpness: Adjust the details of the edges of the picture
- Saturation : Adjust the purity of color
- Backlight: Adjust the value of the backlight
Color temperature
- Press remote control’s [ ◄] / [ ► ] to select the mode: standard/warm/cold/user
- Standard: Give the picture a standard tone
- Warm: Give the picture a warm tone
- Cold: Give the picture a cool hue
- User: Users set a default tone
Picture noise reduction
Press the remote control’s [ ◄ ] / [ ► ] to select the noise reduction
level: Auto/Off/Weak/Middle/Strong
Zoom mode
Press remote control’s [ ◄] / [ ►] to select the mode: 4:3/16:9/Zoom
l/Zoom2/14:9
Sound
Sound mode
- Press the remote [ ◄] / [ ►] to select the mode: standard / music / movie / sports/user Bass:
- Press the remote “enter” and go to the subpage of bass then adjust the bass of sound Treble:
- Press the remote “enter” and go to the subpage of treble then adjust the treble of sound Balance:
- Press the remote “enter” and go to the subpage of balance then adjust the balance of sound AVC:
- AVC is automatic volume control ,Press the remote [ ◄] / [ ► ] to select the mode: on/off Surround:
- Press the remote [ ◄] / [ ►] to select the mode: on/off
SPDI F Output
Press the remote [ ◄] / [ ►] to select the mode: PCM /off / RAW
Equalizer
Press the remote [ ►] to enter: Adjust the value of 120Hz, S00Hz, 1.SKHz, SK
Hz, lO KHz
Setting
Menu time
The time was display of the menu, Press remote [ ◄ ] / [ ► ] to select: 5
seconds/10 seconds/15 seconds/20 seconds/30 seconds
Channel Switch mode
Press remote [ ◄] / [ ►] to select: Freeze Screen /black screen, only in the
ATV source was work
Blue Screen
Press the remote control’s [ ◄] / [ ►] to set whether the blue screen: On/Off
Restore To Default
Press [Enter] / [ ► ] on remote to confirm whether to restore factory
settings, when you reset ,the Tv will be restart again, and remove the Tv
Source Data like the channel ,sound mode and etc. other
Time
Off Time
Press remote [Enter] / [ ► ] to setting the power off time
Scheduled Time
Press remote [Enter] / [ ►] to setting the power on time
Sleep Time
Press the remote [ ◄ ] / [ ► ] to select the sleep time:
10/20/30/60/90/120/180/240 minutes
Auto Sleep
Press remote [Enter] / [ ►] to setting the auto sleep on/off when the source
was not signal, The Tv will be power off after 15 minutes if you select the
“on”
Auto Tuning
Press [Enter] / [ ►] of remote to start search the Tv channel, like the
picture
Manual Tuning
Press [Enter] / [ ► ] of remote to manual search the Tv channel, like the
picture
Program Edit
- Press the “blue” button on the remote control: After setting the channel, press [ channel +/-] will not appear on the channel
- Press the “green” button on the remote control: Edit the channel
- Press the “red” button on the remote control: Delete the channel
- Press the [ Favorite] button on the remote control: Set the channel to favorite channel
Setting App
How to connect the network
Click the “Network” icon and go to the network subpage:
How to add and manager your Accounts
Select the Accounts & Sign-In. and you will get follow picture. if app have
the Sign in function:
How to check App information
Select the app you want, it will show all the app information which include
Version, size, data size, uninstall and so on.
Some device preferences setting
How to change the system language
Click the “Language , and it will be show the list of language. Select the language which you want to change.
Trouble shooting
Before contact the service technician, perform the following simple checks. If any problem still persists, unplug the LCD TV and calling for service.
| PROBLEM
No sound and picture| POSSIBLE SOLUTION
- Check that the main plug has been connected to a wall let.
- Check that you have pressed the POWER button on the front of TV set.
- Check the picture contrast and brightness settings.
|
---|---|---|---
Normal picture but no sound|
- Check the volume.
- Sound muted? Press the MUTE button.
- Try another channel the problem may be with the broadcast.
- Are the audio cables installed properly.
The remote control does not work|
-
Check to see if there is any object between the product and remote control
Causing obstruction. -
Are batteries installed with correct polarity(+ to +,- to-).
-
Correct remote operating mode set: TV, VCR etc.?
-
Install new batteries
Power is suddenly turned off|
- Is the sleep timer set.
- Check the power control settings. Power interrupted.
- No broadcast on station tuned with auto activated.
Picture appears slowly after switching on|
- This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes.
No or poor color or poor picture|
- Adjust the color in menu option.
- Keep a sufficient distance between the product and the VCR.
- Try another channel, the problem may be with the broadcast.
- Are the VIDEO cables installed properly?
- Activate any function to restore the brightness of the picture.
Horizontal/vertical bars or picture shaking| Check for local interference such
as an electrical appliance or power tool.
Poor reception on some channels|
- Station or cable product experiencing problems. Tune to another station.
- Station signal is weak, reorient antenna to receive weaker station.
- Check for sources of possible interference.
Lines or streaks in pictures| __ Check the antenna
(Change the direction of the antenna).
| __
No output from one of the speakes
| Adjust balance in menu option.|
Documents / Resources
|
Smart SY-1241 LED
TV
[pdf] User Manual
SY-1241, SY-1241 LED TV, LED TV, TV
---|---