nVent CD1BCPNAM Conduit Pipe To Deck Angle Bracket Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
nVent CD1BCPNAM Conduit Pipe To Deck Angle Bracket
CD-CPNAM CONDUIT/PIPE TO DECK ANGLE BRACKET, 3/4″ EMT, 3/4″ RIGID/PIPE
CATALOG NUMBER
- CD1BCPNAM
FEATURES
- Meets the requirements of NEC® Section 300.4(E)
- Supports conduit or pipe 1-1/2″ (38 mm) under the roof decking to prevent potential damage from nails or screws
PRODUCT ATTRIBUTES
- Material: Steel
- Finish: Electrogalvanized
- EMT Conduit Size: 3/4″
- Rigid Conduit/Pipe Size: 3/4″
WARNING
- nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials.
- Instruction sheets are available at www.nvent.com and from your nVent customer service representative.
- Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
CONTACT
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands:
- +31 800-0200135
- France:
- +33 800 901 793
Europe
- Germany:
- 800 1890272
- Other Countries:
- +31 13 5835404
APAC
- Shanghai:
- + 86 21 2412 1618/19
- Sydney:
- +61 2 9751 8500
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
nVent.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>