LIEBHERR 181.2cm Fridge Freezer User Guide

LIEBHERR 181.2cm Fridge Freezer

User Guide
fridge/freezer

20240125
7086293 – 00

The manufacturer works constantly on the further development of all the types and models. Therefore please understand that we have to reserve the right to make design, equipment and technical modifications.
To get to know all the benefits of your new appliance, please read the information contained in these instructions carefully.
The instructions apply to several models. Differences may occur. Text relating only to specific appliances is marked with an asterisk (*).
Instructions are marked with a , and results are marked with a .

Appliance at a glance

Description of appliance and equipment

Note

• Place food inside the appliance as shown in the diagram. This allows the appliance to save energy during opera‐tion.
• Shelves, drawers and baskets are arranged for optimum energy efficiency on delivery.

1. Adjustable shelves
2. Egg tray
3. Adjustable door shelf
4. On/Off and temperature controller and interior lighting
5. Defrost water drain
6. Bottle rack
7. Coldest area in the refrigerator compartment, for sensitive and perishable foodstuffs
8. Vegetable, salad and fruit bins
9. Type plate
10. Deep freezer drawers
11. Adjustable feet at the front
12. Ice cube tray
13. Recessed grip

Appliance range of use
Intended use
The appliance is only suitable for cooling food products in a domestic or household-like environment. This includes, for example, use:

• in staff kitchens, bed and breakfast estab‐lishments,
• by guests in country houses, hotels, motels and other accommodation,
• for catering and similar services in the wholesale trade.

The appliance is not suitable as a built-in unit.
All other types of use are not permitted.

Foreseeable misuse
The following applications are expressly forbidden:

• Storing and refrigerating medicines, blood plasma, laboratory preparations or similar substances and products based on the Medical Device Directive 2007/47/EC
• Use in areas at risk of explosions

Misusing the appliance may lead to damage to the goods stored or they may spoil.

Climate classifications
Depending on the climate classification the appliance is designed to operate in restricted ambient temperatures. The climate classification applying to your appliance is printed on the rating plate.

Note
Keep to the specified ambient temperatures in order to guarantee that the appliance works properly.

Conformity
The refrigerant circuit has been tested for leaks. The appliance complies with the applicable safety regulations and with the corresponding directives.

For the EU market:
The appliance complies with directive 2014/53/EU.

For the GB market:
The appliance complies with Radio
Equipment Regulations 2017 SI 2017 No. 1206.

The full text of the EU Declaration of Conformity is available on the following website: www.Liebherr.com

SVHC substances according to REACH regulation
You can check whether your appliance contains SVHC substances according to REACH regulation at the following link: home.liebherr.com/de/deu/de/liebherr- erleben/nach‐haltigkeit/umwelt/scip/scip.html

EPREL database
Details about energy labelling and ecodesign requirements will be available on the European product database (EPREL) from 1st March 2021. You can access the product database at the following link: https://eprel.ec.europa.eu/ You will be asked to enter the model ID. You can find the model ID on the nameplate.

Installation dimensions

| H
---|---
CU… 23..| 1372
CU… 28..| 1612
CU… 33../ CU 33..| 1812
KGw 1855 2E| 1812

x This dimension increases by 35 mm (see 4.2 Installing the appliance) with devices that use wall spacer brackets.

Saving energy

• Pay attention to good ventilation. Do not cover ventilation holes or grids.
• Do not install the appliance in direct sunlight, next to an oven, radiator or similar.
• Energy consumption depends on the installation conditions, e.g. the ambient temperature (see 1.2 Appliance range of use) . A warmer ambient temperature can increase the energy consumption.
• Open the appliance for as short a time as possible.
• The lower the temperature is set the higher the energy consumption.
• Sort your food: home.liebherr.com/food.
• Keep all food properly packed and covered. This prevents frost from forming.
• Only take food out for as long as necessary so that it doesn’t warm up too much.
• Inserting warm food: allow to cool down to room temperature first.
• Thaw frozen food in the refrigerator.
• If there is a thick layer of frost in the appliance: defrost the appliance.

Dust deposits increase energy consumption

•  For refrigerators with heat exchangers dust the metal grid on the back of the appliance once a year.

General safety instructions

Please keep these operating instructions in a safe place so you can refer back to them at any time.
If you pass the appliance on, please hand these operating instructions to the next user.
Read these operating instructions carefully before use to ensure safe and correct use of the appliance. Follow the instructions, safety instructions and warning messages included at all times. They are important for ensuring you can operate and install the appliance safely and without any problems.

Danger for the user

• This device can be used by children and people with impaired physical, sensory or mental abilities or with a lack of experience and knowledge provided that they are supervised or have received instruction in the safe use of this device, and about the resulting hazards. Children must not play with this appliance. Cleaning and user maintenance work must not be carried out by children without adult supervision. Children aged between 3 and 8 are allowed to load and unload the appliance. Children below the age of 3 must be kept away from the appliance unless they are under continuous adult supervision.
• The socket must be easily accessible so that the appliance can be disconnected quickly from the electricity in an emergency. It must not be located in the area behind the appliance.
• When disconnecting the appliance from the supply, always take hold of the plug. Do not pull the cable.
• In the event of a fault pull out the mains plug or deactivate the fuse.
• Do not damage the mains power cable. Do not operate the appliance with a defective mains power cable.
• Repairs, interventions on the appliance and the replacement of mains connection line may only be carried out by AfterSales Service or other suitably trained specialist personnel.
• Only assemble, connect and dispose of the appliance according to the instructions.

Fire hazard

• The coolant used (information on the model plate) is ecofriendly but also flammable. Any leaking coolant may ignite.
  • Do not damage the refrigerant circuit pipes.
  • Do not handle ignition sources inside the appliance.
  • Do not use electrical appliances inside the appliance (e.g. steam cleaners, heaters, ice cream makers, etc.).
  • If the refrigerant leaks: remove any naked flames or ignition sources from the vicinity of the leakage point. Properly air the room. Inform customer services.
• Do not store explosives or sprays using combustible propellants such as butane, propane, pentane, etc. in the appliance. To identify these spray cans, look for the list of contents printed on the can, or a flame symbol. Gases possibly escaping may ignite due to electrical components.
• Keep burning candles, lamps and other items with naked flames away from the appliance so that they do not set the appli‐ance on fire.
• Please be sure to store alcoholic drinks or other packaging containing alcohol in tightly closed containers. Any alcohol that leaks out may be ignited by electrical components.
• Danger of tipping and falling:
  • Do not misuse the plinth, drawers, doors etc. as a step or for support. This applies particularly to children.
• Danger of food poisoning:
  • Do not consume food which has been stored too long.
• Danger of frostbite, numbness and pain:
  • Avoid prolonged skin contact with cold surfaces or refrigerated/frozen goods or take protective measures, e.g wear gloves.
  • Danger of injury and damage:
• Hot steam can lead to injury.
  • Do not use electrical heating or steam cleaning equipment, open flames or defrosting sprays to defrost.
  • Do not use sharp implements to remove the ice.
• Risk of crushing:
  • Do not hold the hinge when opening and closing the door. Fingers may get caught.

Symbols on the appliance:
This symbol may be located on the compressor. It relates to the oil in the compressor and makes reference to the risk that: Swallowing or inhaling can be fatal. This advice is only relevant to recycling. There is no danger in normal operation.
This symbol is located on the compressor and indicates the danger of flammable materials. Do not remove the sticker.
This or a similar sticker may be located on the rear of the appliance. This sticker indicates that there are vacuum insulation panels (VIP) or perlite panels in the door and/or housing. This advice is only relevant to recycling. Do not remove the sticker.

Please note the warning messages and other specific advice in the other chapters:

| DANGER| indicates an immediately hazardous situation which  will lead to death or serious injuries if it is not avoided.
---|---|---
| WARNING| indicates a hazardous situation which may lead to death or serious injuries if it is not avoided.
****| CAUTION| indicates a hazardous situation which may lead to minor or moderate injuries if it is not avoided.
| NOTICE| indicates a hazardous situation which may lead to damage to property if it is not avoided.
| Note| indicates useful instructions and tips.

Controls and displays

Operating and control elements

1. Temperature control
2. SuperCool button

Putting into operation

Transporting the appliance

u Transport the appliance only in suitable packaging.
u Transport the appliance upright.
u Do not transport the appliance on your own.

Installing the appliance

WARNING
Fire hazard due to dampness!
If live parts or the mains lead become damp this may cause short circuits.
The appliance is designed for use in enclosed areas. Do not operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions.

WARNING
Danger of fire due to incorrect positioning!
If the mains cable or plug touches the back of the appliance, the vibration can damage the mains cable or the plug resulting in a short circuit.

• Make sure the mains cable is not trapped under the appliance when you position the appliance.
• Stand the appliance so that it is not touched by connectors or main cables.
• Do not connect any appliances to sockets in the area of the back of the appliance.
• Do not place and operate multi-sockets/power distributors and other electronic devices (such as halogen trans‐formers) at the back of the appliances.

WARNING
Leaking coolant and oil!
Fire. The coolant contained in the appliance is eco-friendly but also flammable. The oil contained in the appliance is flammable. Escaping coolant and oil can ignite if the concentration is high enough and in contact with an external heat source.

Do not damage the pipelines of the coolant circuit and the compressor.

WARNING
Fire hazard and danger of damage!
Do not place appliances emitting heat e.g. microwaves, toasters etc. on the appliance!

NOTICE
Covered vents!
Damage. Appliance can overheat, which can reduce the service life of various parts of the appliance and lead to operational impairments.

• Always make sure there is good ventilation.
• Always keep vents or ventilation grids in the appliance housing and in the kitchen furniture (fully integrated appliance) unobstructed.

NOTICE
Risk of damage due to condensate!
Do not install the appliance directly alongside a further refrigerator/freezer.

Note
If multiple appliances are placed next to each other, allow a distance of 100 mm between the appliances. Condensation will build up between the side walls of the appliances if this distance is not maintained.

Putting into operation

• Before you connect the appliance, report any damage immediately to the delivery company.
• The floor of the installation site must be horizontal and even.
• Do not install the appliance in direct sunlight, next to an oven, radiator or similar.
• Install the appliance with the rear panel up against the wall and always use the supplied wall spacers (see below).
• Only ever move the appliance when it is empty.
• The surface supporting the appliance must be at the same level as the surrounding floor.
• Do not install the appliance on your own.
• The more refrigerant there is in the appliance, the larger the space that it is installed in must be. If the space is too small, any leak may create a flammable mixture of gas and air. For every 8 g of refrigerant, the installation space must be at least 1 m3. Information regarding the coolant can be found on the type plate inside the appliance.

Detach the connecting cable from the rear of the appliance, removing the cable holder at the same time because otherwise there will be vibratory noise!

NOTICE
The stainless steel doors are provided with a high-quality surface coating and must not be treated using the accompanying care product.

Otherwise the surface coating will be affected.

• Wipe the coated door surfaces using a soft, clean cloth only.
• Apply a stainless steel cleaner only to the stainless steel side walls evenly, wiping with the grain. Subsequent cleaning becomes easier as a result.
• Wipe side walls with a paint finish using a soft, clean cloth only.
• Remove the protective film from the decorative trims.
• Remove all transit supports. To achieve the specified energy consumption, use the spacers, which are supplied with some appliances. This increases the appliance depth by approx. 35 mm. The appliance will work properly without the spacers but will consume slightly more energy.
• If your appliance comes with wall spacers, mount these on the back of the appliance, bottom left and right.
• Dispose of packaging material (see 4.5 Disposing of packaging) .

CAUTION
Risk of injury or damage from the appliance tipping or the door falling open!
If the additional adjustable foot on the base support is not correctly positioned on the floor, there is a risk of the door falling open or the appliance tipping. This can lead to injury or property damage.

• Unscrew the additional adjustable foot on the support until it reaches the floor.
• Then turn it another 90°.
• Align the appliance so that it stands firmly and on a level by applying the accompa‐nying spanner to the adjust‐able-height feet (A) and using a spirit level.
• Then support the door: Extend the adjustable foot at the turn hinge (B) until it rests on the floor and then make a further 90° turn.

Note

Clean the appliance (see 6.2 Cleaning the appliance) . If the appliance is installed in a very damp environment, condensate may form on the outside of the appliance.
Always see to good ventilation at the installation site.

Changing over the door hinges
You can change over the door hinges if necessary. Ensure that the following tools are to hand:

• Torx® 15
• Torx® 20
• Screwdriver
• Cordless screwdriver, if necessary
• Second person for fitting work, if needed

Detaching the upper door

Note
Remove any food from the door racks before removing the door, so that no food falls out.

• Pull off the cover Fig. 5 (1) forwards and upwards.
• Lift off the cover Fig. 5 (2).

CAUTION
Risk of injury if the door tips!

• Take good hold of the door.
• Set down the door carefully.
• Unscrew the upper turn hinge Fig. 5 (3) (2 x Torx® 20) Fig. 5 (4) and lift it off.
• Lift up the upper door and set it aside.

Detaching the lower door

Open the lower door.

CAUTION
Risk of injury if the door tips!

• Take good hold of the door.
• Set down the door carefully.
• Unscrew the fastening screws Fig. 6 (11) (2 x Torx® 20) and pull the centre bearing block out of the lower door.
• Remove plastic washer Fig. 6 (10) .
• Lift up the door and set it aside.

Transferring the middle bearing elements

• Remove the cover Fig. 6 (12) carefully.
• Re-install the cover Fig. 6 (12) on the opposite side.

Transferring the lower bearing elements

• Unscrew fastening screws Fig. 7 (21) .
• Remove the lower bearing block Fig. 7 (23), complete with bearing bolt Fig. 7 (24), washer Fig. 7 (26) and adjustable foot Fig. 7 (22).
• Unscrew the bearing bolt Fig. 7 (24), complete with washer Fig. 7 (26), re-locate it into the mounting hole on the opposite side of the bearing block and tighten again.
• Carefully remove the cover plate Fig. 7 (25) and re-locate it to the other side.
• Fasten the lower bearing block Fig. 7 (23), complete with bearing bolt Fig. 7 (24), washer Fig. 7 (26) and adjustable foot Fig. 7 (22) to the new hinge side, with the help of a cordless screwdriver if necessary, and tighten (with 4 Nm) once again.

Fitting the lower door

• Lower the bottom door onto the bearing bolt Fig. 7 (24).
• Close the door.
• Insert the centre bearing block Fig. 6 (13) turned through 180° into the lower door and fasten firmly (with 4 Nm) to the new hinge side with the fastening screws Fig. 6 (11) (2 x Torx® 20).
• Refit plastic washer Fig. 6 (10).

Fitting the upper door

• Set the upper door down on the centre bearing block Fig. 6 (13).
• Insert the upper turn hinge Fig. 5 (3) in the door on the new hinge side.
• Screw in the upper bearing block tightly (with 4 Nm)(2 x Torx® 20) Fig. 5 (4). Use a cordless screwdriver if necessary.
• Fit the cover Fig. 5 (1) on the opposite side by sliding it rearwards and latching it into place.
• Press the cover Fig. 5 (2) on the opposite side down into place until it latches.
• Unscrew the adjustable foot Fig. 7 (22) on the lower bearing block Fig. 7 (23) until it reaches the floor.

WARNING
Danger of injury due to door falling out!
If the bearing parts are not screwed on tightly enough, the door may fall out. This can result in serious injuries. In addition, the door may not close with the result that the appliance does not cool properly.

• Screw the bearing brackets on firmly with 4 Nm.
• Check all screws and retighten them if necessary.

Control

Sliding into the row of units

1. Top cupboard
2. Appliance
3. Kitchen cabinet
4. Wall

x For appliances with supplied wall spacers, the dimension must be increased by 35 mm (see 4.2 Installing the appli‐ance) .
The appliance can be built into kitchen units. A top cupboard Fig. 8 (2) can be added above the appliance in order to bring the appliance Fig. 8 (1) up to the height of the fitted kitchen units.
When fitting kitchen cupboards around the appliance (max. depth 580 mm), you can install the appliance directly next to the kitchen cupboard Fig. 8 (3). The appliance protrudes 34 mm x to the side and 50 mm x in the centre of the appli‐ance in relation to the kitchen cupboard front.

NOTICE
Danger of overheating due to insufficient air ventilation!The compressor may be damaged if there is insufficient air ventilation.

• Take care to ensure adequate air ventilation.
• Observe the ventilation requirements.

Ventilation requirements

• At the back of the top cupboard, there must be a ventilation shaft at least 50 mm deep across the top cupboard’s entire width.
• The ventilation gap cross-section under the ceiling must be at least 300 cm2.
• The wider the ventilation clearance, the more efficiently the appliance will run.

If the appliance is set up with the hinges next to a wall Fig. 8 (4), the distance between the appliance and the wall must be at least 40 mm. This is how far the handle protrudes when the door is open.

Disposing of packaging

WARNING
Danger of suffocation due to packing material and plastic film!

• Do not allow children to play with packing material.
  The packaging is made of recyclable materials:

  • corrugated board/cardboard
  • expanded polystyrene parts
  • polythene bags and sheets
  • polypropylene straps
  • nailed wooden frame with polyethylene panel*

• Take the packaging material to an official collecting point.

Connecting the appliance

NOTICE
Danger of damage to incorrect connection!Damage to the appliance.

Do not connect the appliance to a stand-alone inverter, e.g. solar power systems and petrol generators.

WARNING
Danger of fire due to incorrect connection!Burns.
Damage to the appliance.

• Do not use an extension cable.
• Do not use distributor blocks.

The type of current (alternating current) and voltage at the installation site have to conform with the data on the type plate (see 1 Appliance at a glance) .
The socket must be properly earthed and fused. The tripping current for the fuse must be between 10 A and 16 A.
The socket must be easily accessible so that the appliance can be quickly disconnected from the supply in an emergency. It must be outside the area of the rear of the appli‐ance.

• Check the electrical connection.
• Plug in the power plug.

Switching on the appliance
Switch the appliance on about 2 hours before starting to stock it with any frozen goods.

• Turn the temperature controller Fig. 3 (1) clockwise to the position of the middle temperature point between off and max cold .
  • The interior lighting is on.

Control

Refrigerator compartment
The natural circulation of air in the refrigerator compartment results in zones differing in temperature. It is coldest directly above the vegetable drawers and at the rear wall. It is warmest at the top front of the compartment and in the door.

5.1.1  Refrigerating food

Store perishable foods such as ready-to-eat meals, meat and sausages in the coldest area. Place butter and preserves in the top area and in the door. (see 1 Appli‐ance at a glance)
Use reuseable plastic, metal, aluminium, glass containers and foil wrap to store food.
Always store raw meat and fish in clean, sealed containers on the bottom shelf of the refrigerator, to prevent them coming into contact with or dripping onto other foods.
u Foods that easily absorb or give off smell or taste, as well as liquids, should be stored in sealed containers or covered.
u Use the front area of the base shelf only to tempora‐rily set down refrigerated foods, for example while rear‐ranging or sorting the contents. Remember not to leave refrigerated foods here as they could shift to the back or tip over when you close the door.
u Do not pack foods too closely together, as the air needs to circulate.

Setting the temperature
The temperature is adjustable clockwise between “off” and “max cold” (coldest temperature, greatest cooling capacity).
We recommend the middle control position, which ensures an average cold room temperature of approx. 5 °C.
An average temperature of about –18 °C is then set in the freezing compartment.
If frozen food is being stored and low freezing temperatures are to be ensured, it is recommended to adjust the tempera‐ture control setting from the middle position to “max cold” . The “max cold” setting allows the coldest zone in the refrig‐erator to reach temperatures below 0 °C.

• Turn temperature control Fig. 3 (1).
  The temperature depends on the following factors:

  • How often the door is opened
  • How long the door is open for
  • The room temperature of the installation site
  • The type, temperature and amount of frozen items

• If necessary, adjust the temperature with the control.

SuperCool function
This function ensures low temperatures in the freezer compartment.

Activating SuperCool function
At room temperatures of 15 °C or below, SuperCool is automatically activated. When SuperCool is activated, the SuperCool button lights up.
If you want to achieve lower temperatures in the freezer compartment, then you can also activate SuperCool manually:

• Press the SuperCool (see Fig. 3) button.
• The SuperCool button lights up.

Deactivating SuperCool function
SuperCool is automatically deactivated at room temperatures of more than 15 °C. When SuperCool is deactivated, the SuperCool button does not light up.
If you have activated SuperCool manually, then SuperCool is automatically deactivated after 70 hours. However, you can also deactivate SuperCool manually at any time:

Press and hold the SuperCool (see Fig. 3) button for 3 seconds.

Note
At room temperatures of more than 15 °C, SuperCool is activated automatically if SuperCool has not been activated before. When SuperCool is automatically activated, the SuperCool button lights up. If SuperCool has been activated automatically, the function cannot be deactivated manually.

Shelves
Moving or removing shelves
The shelves are prevented from being pulled out accidentally by pull out stops.

• Lift the shelf and pull forward a little.
• Adjust the height of the shelf. To do this move the slots along the supports.
• In order to remove the shelf fully, place it at a slant and pull out towards the front.
• Insert shelf with the raised edge pointing upwards at the back.
• The food does not freeze onto the rear wall.

Dismantling shelves

• The shelves can be dismantled for cleaning.

Door racks
Moving the storage rack

• Remove storage rack according to illustration.

Freezer compartment
You can store frozen food, make ice cubes and freeze fresh food in the freezer compartment.

Freezing food
The rating plate indicates the maximum quantity of fresh food you can freeze within 24 hours (see 1 Appliance at a glance) under “Freezing capacity … kg/24h”.
Each drawer can hold a max. of 25 kg of frozen food.
The shelves can each be loaded with 35 kg of frozen food.
A vacuum is generated after the door is closed. After closing the door, wait for about 1 minute and then it opens more easily.

Maintenance

CAUTION
Risk of injury due to broken glass!
Bottles and cans containing drinks may burst when being frozen. This applies particularly to sparkling drinks.

• Do not freeze bottles and cans containing drinks!
• 24 hours before freezing food, set the temperature to a mid to cold position
• Switching SuperCool on: (see Activating SuperCool func‐tion) .

The freezer temperature will drop, and the appliance will operate at the maximum refrigerating capacity.

• So that the food is rapidly frozen through to the core, do not exceed the following quantities per pack
  • Fruit, vegetables up to 1 kg
  • Meat up to 2.5 kg
• Pack the food in portions in freezer bags, reusable plastic, metal or aluminium containers
• Spread the food out in the bottom drawer and on the compartment bottom, and do not allow it to come into contact with food that is already frozen, to prevent this defrosting.
• Reset the temperature controller 24 hours after inserting the food.
• Reset the temperature 24 hours after storing the food. When the room temperature is higher than 15 °C:
• SuperCool is deactivated automatically after 70 hours. However, you can also deactivate SuperCool manually at any time (see Deactivating SuperCool function) .
• ]Press and hold the SuperCool (see Fig. 3) button for 3 seconds.

Storage life

Standard values for the storage life of various types of food in the freezer compartment:

Ice-cream| 2 to 6 months
Sausage, ham| 2 to 6 months
Bread, bakery products| 2 to 6 months
Game, pork| 6 to 10 months
Fatty fish| 2 to 6 months
Lean fish| 6 to 12 months
Cheese| 2 to 6 months
Poultry, beef| 6 to 12 months
Vegetables, fruit| 6 to 12 months

The values indicated for storage life are standard ones.

Thawing food

• in the refrigerator compartment
• in a microwave oven
• in a conventional or fan oven
• at room temperature
• Remove only as much food as is required. Use thawed food as quickly as possible.
• Food once thawed should be re-frozen only in exceptional cases.

Drawers
To store frozen food directly on the shelves pull the drawer forward and lift it out.

Shelves
Moving shelves

• To remove the shelf: lift up at the front and pull out.
• To put the shelf back: simply push in as far as it will go.

VarioSpace
You can remove the shelves and drawers. This leaves more room for larger food items such as poultry, meat, large game and tall baked goods, which can be frozen whole before further preparation.

• Each drawer can hold max. 25 kg of frozen food.
• The shelves can each be loaded with 35 kg of frozen food.

Maintenance

Manual defrosting
Fridge compartment:
The fridge compartment defrosts automatically. The defrosted water is evaporated by the heat of the compressor. Water drops or a thin layer of frost or ice can form on the back wall; this is a completely normal part of the machine’s function.

Freezer compartment:
A layer of frost or ice can build up in the freezer compartment after a long period of operation.
The layer of frost or ice builds up faster if the appliance is opened often or if the food is warm when placed inside. However, a thick layer of ice will increase the appliance‘s energy consumption. You should therefore defrost the appli‐ance regularly.

Thawing process

WARNING
Improper defrosting of the appliance!Injuries and damage.

• Do not use mechanical equipment or other methods to speed up the defrosting process other than those recom‐mended by the manufacturer.
• Do not use electrical heating or steam-cleaning appli‐ances, naked flames or defroster sprays to defrost.
• Do not use sharp objects to remove ice.
• Switch off the appliance.
• Pull out the power plug or switch off the fuse.
• If possible, put the frozen goods in the freezer drawer, wrapped in newspaper or a blanket, and store in a cool place.
• Place a pan with hot, not boiling water on a middle shelf.
• Defrosting is speeded up.
• Leave the door of the appliance open while defrosting.
• Remove detached pieces of ice.
• If necessary, pick up defrost water several times, using a sponge or cloth.
• Clean the appliance (see 6.2 Cleaning the appliance) .

Cleaning the appliance
Clean the appliance regularly.

WARNING
Risk of injury and damage as a result of hot steam!
Hot steam can lead to burns and can damage the surfaces.

• Do not use any steam cleaners!

NOTICE
Incorrect cleaning damages the appliance!

• Do not use cleaning agents in concentrated form.

• Do not use any scouring or abrasive sponges or steel wool.

• Do not use any sharp or abrasive cleaning agents, nor any that contain sand, chloride or acid.

• Do not use chemical solvents.

• Do not damage or remove the type plate on the inside of the appliance. It is important for the customer service.

• Do not pull off, bend or damage cables or other components.

• Do not allow any cleaning water to enter the drain channel, ventilation grille or electrical parts.

• Please use soft cleaning cloths and a universal pH-neutral cleaning agent.

• Please use cleaning and care products suitable for contact with foodstuffs in the appliance interior.

• Empty appliance.

• Pull out the power plug.

• Clean the vent grille regularly.

• Dust deposits increase energy consumption.

• Clean plastic outer and inner surfaces with lukewarm water and a little washing-up liquid.

NOTICE
The stainless steel doors are treated with a high quality surface coating and must not be treated with stainless steel care products.

Otherwise the surface coating will be affected.

• Coated door surfaces and painted side walls must only be wiped with a soft, clean cloth. If they are very dirty, use a little water or a neutral cleaner. A microfibre cloth may also be used.

• If the stainless steel side walls are dirty, clean them using a commercially available stainless steel cleaning agent. Then evenly apply the accompanying stainless steel care product, making strokes in the direction of the grain.

• Clean drain hole: Remove deposits with a narrow instrument, e.g. a cotton bud.

• Most of the parts can be dismantled for cleaning: see the relevant chapter.

• Clean drawers by hand with lukewarm water and a little washing up liquid.

• Clean other items of equipment by hand with lukewarm water and a little washing-up liquid.

After cleaning

• Wipe dry the appliance and items of equipment.
• Connect the appliance and switch it on again. When the temperature is sufficiently cold:
• Put the food back inside.

Replacing the interior lighting
An LED lamp is used as standard illumination for the interior space in the appliance.
The power supply (AC) and voltage at the operating point must comply with the details on the rating plate (see 1 Appliance at a glance) .

When a LED is used
Only use the original LED lamp from the manufacturer, max. 15 W. The lamp can be obtained from customer service or a specialist dealer (see 6.4 Customer service) .

WARNING
Risk of injury from LED light!
The light intensity of the LED lighting corresponds to risk group RG 2.
If the cover is removed:

• Do not look directly into the light at close quarters through optical lenses. Doing so may damage your eyes.

WARNING
Fire hazard from the LED light!
If different LED lights are used, there is a danger of over‐heating or fire.

Use the manufacturer’s original LED light.

If the lamp is faulty, replace it as follows:

Malfunctions

• Fehler beim Erfassen! Kette “fixtomargin…” unterbrochen.
  • Switch the appliance off.
• Fehler beim Erfassen! Kette “fixtomargin…” unterbrochen.
  • Unplug the mains plug or switch the circuit breaker off.
• Fehler beim Erfassen! Kette “fixtomargin…” unterbrochen.
  • Push the lamp cover in and apart at the front, and remove to the side as shown in the illustration.
• Fehler beim Erfassen! Kette “fixtomargin…” unterbrochen.
  • Replace the lamp.
• Fehler beim Erfassen! Kette “fixtomargin…” unterbrochen.
  • Push the lamp cover on again and engage.

Customer service
First check whether you can rectify the fault yourself (see 7 Malfunctions) . If you cannot rectify the problem, contact Customer Services. You can find the address in the enclosed Customer Service Directory.

WARNING Unprofessional repair!Injuries.

• Have any repairs and action – not expressly specified -on the appliance and mains cable carried out by service personnel only. (see 6 Maintenance)
• A damaged mains cable may only be replaced by the manufacturer, the manufacturer’s Customer Service or a similarly qualified person.
• In the case of appliances with an IEC connector, the change may be made by the customer.
• Read the appli‐ance designation Fig. 11 (1), service No. Fig. 11 (2) and serial No. Fig. 11 (3) off the model plate located inside the appliance on the left-hand side.
• Notify the customer service, specifying the fault, appli‐ance designation Fig. 11 (1), service No. Fig. 11 (2) and serial No. Fig. 11 (3).
• This will help us to provide you with a faster and more accurate service.
• Keep the appliance closed until the customer service arrives.
• The food will stay cool longer.
• Pull out the mains plug (not by pulling the connecting cable) or switch off the fuse.

Energy efficiency class lighting

Lighting

Energy efficiency class1| Light source
This product contains an energy efficiency class G light source| LED

1 The appliance may contain light sources with different energy efficiency classes. The lowest energy efficiency class is indicated.

Malfunctions
Your appliance is designed and manufactured for a long life span and reliable operation. If a malfunction nonetheless occurs during operation, check whether it is due to a handling error. In this case you will have to be charged for the costs incurred, even during the warranty period. You may be able to rectify the following faults yourself:

Switching on the appliance.
→ The power plug is not properly inserted in the wall socket.| u| Check power plug.
→ The fuse of the wall socket is not in order.| u| Check fuse.
The compressor runs for a long time.| → The compressor  switches  to a low speed when little cold is needed. Although the running time is increased as a result, energy is saved.| u| This is normal in energy-saving models.
Defect| Cause| Remedy
---|---|---
 | → SuperCool is activated.| The compressor runs for longer in order to rapidly cool the food. This is normal.
A LED on the bottom rear of the appliance (at the compressor) flashes regularly

*every 15 seconds.**

| → The inverter is equipped with a diagnostic LED.| The flashing is normal.
Excessive noise.| → Due to the various speed steps, speed-regulated* compressors can generate different running noises.| The sound is normal.
A bubbling and gurgling noise.| → This noise comes from the refrig‐ erant flowing in the refrigeration circuit.| The sound is normal.
A quiet clicking noise.| → The noise is produced whenever the refrigeration unit (motor) auto‐ matically switches on or off.| The sound is normal.
A hum. It is briefly a little louder when the refrig‐ eration unit (the motor) switches on.| → The refrigeration increases auto‐ matically when the SuperCool function is activated, fresh food has just been placed in the appli‐ ance or the door has been left open for a while.| The sound is normal.
→ The ambient temperature is too high.| Solution: (see 1.2 Appliance range of use)
Vibration noises| → The appliance is not standing  firmly on the floor. As a result objects and adjacent units  start  to vibrate when the refrigerator is running.|

• Align the appliance using the adjustable feet.
• Keep bottles and jars apart.

*The outer surfaces of the appliance are warm.| → The heat of the refrigeration circuit is used to prevent condensate from forming.|  This is normal.
The temperature is not cold enough.| → The door of the appliance is not properly closed.| Close the door of the appliance.
→ Insufficient ventilation.| Keep ventilation grille clear, and clean it.
→ The ambient temperature is too high.| Solution: (see 1.2 Appliance range of use) .
→ The appliance was opened too frequently or for too long.| Wait to see whether the appliance reaches the required temperature by itself. If not, please contact the after sales service (see 6 Maintenance) .
→ The appliance is too close to a source of heat (stove, heater etc).| Change the position of the appliance or the source of heat.
The internal light does not come on.| → The appliance is not switched on.| Switch the appliance on.
→ The lamp (if the model comes with an LED lamp) is faulty.| **

WARNING
Risk of injury from LED light!
The light intensity of the LED lighting corresponds to risk group RG 2.
If the cover is removed:

• Do not look directly into the light at close quarters through optical lenses. Doing so may damage your eyes.
• Change the lamp (see 6 Maintenance) .

With an ambient temperature below| → This is a necessary part of the function.| This is normal.

Decommissioning

15 °C the device is slightly warmed in places on the inner surface of the fridge compart‐ ment’s right side wall.|  |
The backlight for the SuperCool button flashes.| → The device is equipped with fault diagnostics.| u Contact customer service (see 6 Maintenance) .

Decommissioning

Switching off the appliance
Turn temperature control Fig. 3 (1) to off.

Taking the appliance out of service

• Empty the appliance.
• Switch off the appliance (see 8 Decommissioning) .
• Remove mains connector.
• Clean the appliance (see 6.2 Cleaning the appliance) .
• Leave the door open to prevent odour.

Dispose of batteries separately from the old appliance. To do this, you can return the batteries free of charge to retailers as well as recycling centres and collection centres for recyclable materials.
Dispose of removed lamps via the respective collection systems.
You can dispose of the appli‐ance free of charge via the class 1 collection containers at the local recycling and recyclable material collection centres. When purchasing a new fridge/freezer, if the sales area 400 m2, retailers will also take back the old appliance free of charge.

Disposal

Preparing appliance for disposal
Liebherr uses batteries in some of its appli‐ances. In the EU, for environmental reasons, legislation obliges the end user to remove these batteries before disposing of old appli‐ances. If your appliance contains batteries, a corresponding notice is attached.
If you can remove the lamps yourself without destroying them, also remove these before disposal.

• Take the appliance out of operation. (see 8.2 Taking the appliance out of service)
• Appliances with batteries: remove the batteries. For description, see Maintenance chapter.
• If possible: remove lamps without destroying them.

Disposing of the appliance in an environmentally friendly manner
The appliance still contains valuable materials and must be disposed of separately from unsorted municipal waste.

WARNING
Leaking coolant and oil!
Fire. The coolant contained in the appliance is eco-friendly, but also flammable. The oil contained in the appliance is flammable. Escaping coolant and oil can ignite if the concentration is high enough and in contact with an external heat source.

• Do not damage the pipelines of the coolant circuit and the compressor.
• Transport the appliance without damaging it.
• Dispose of batteries, lamps and the appliance according to the above specifications.

Liebherr-Hausgeräte Marica EOOD

4202 Radinovo
Bezirk Plovdiv
Bulgarien
home.liebherr.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>