DONGGUAN YH-A4 Wifi Camera Instruction Manual

DONGGUAN YH-A4 Wifi Camera

Product Specifications

• Model: iCam365
• Power Supply: DC 5V
• Connectivity: WiFi
• Storage: MicroSD card (not included)

Product Usage Instructions

A. Connect the Device:

1. Scan the QR code to download the iCam 365 App.
2. Download and install the app using the Scan function of your mobile phone.
3. Connect the device to the power supply and wait for about 1 minute.

B. Add Device:

1. Log in to the app.
2. Select “Add device” and follow the on-screen instructions.
3. Scan the QR code of the device.
4. Wait for automatic recognition.
5. Select the WiFi network to connect to and enter the password.
6. Show the QR code to the device lens and follow the prompts.
7. Wait for the configuration to complete.
8. The device will be added and named, appearing on your homepage.

C. Common Problems and Solutions:

What should I do if the device is unsuccessfully added?
Solution: Check WiFi password correctness, network connection, RESET camera, and re-add it.

Check whether the WiFi password is correct, and the network can be connected correctly, then RESET the camera, and add it again after completion.

How to download video?|

Click the “Record Screen” button during playback, and click the red button after recording, and the video file will be saved to the phone;

What if the display device is offline?

|

First confirm whether the power supply and network are normal, and there is no problem before powering off the camera and restarting it. If the connection is still disconnected

The memory card is full, what should I do?

|

No manual processing is required. When the remaining memory card capacity is less than or equal to 500M, the camera will automatically overwrite the oldest video file.

The memory card shows no memory card or abnormal

| 1. The camera does not support hot swapping. When inserting a memory card, it needs to be powered off. Please restart the camera.2. The memory card is still not recognized after restarting the camera, please replace with a new card and test again.3. If the new card is

still not recognized, the card slot may be damaged or the cable is faulty. Contact the supplier to replace the device.

What should I do if I cannot receive the warning message?

|

Confirm whether the system has turned off the message push permission of iCam365. If it is turned off, please turn on the “message notification” permission in the phone settings

and check whether the message push is turned off in the device settings. Alarm messages are stored for up to 7 days

How to download video?
Solution: During playback, click Record Screen, then click the red button to save the video file to your phone.

What if the display device is offline?
Solution: Check power and network, restart camera if issue persists.

If the memory card is full?
Solution: Camera will automatically overwrite oldest video files when memory is full.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

FAQs

What should I do if I cannot receive warning messages?

Ensure message push permission is enabled, restart camera, replace memory card if needed, or contact support.

How do I reset the camera?

Use the reset function within the app or follow the device's manual instructions for resetting.

Can I use any memory card with the device?

The device may not be compatible with all memory cards. If issues arise, try a different card and consult the manual for recommended types.

What should I do if the device does not connect to WiFi?

Check your WiFi settings and ensure the password is correct. If problems persist, reset the device and try connecting again.

How can I access recorded videos?

Videos are stored on the memory card and can be accessed through the app by navigating to the playback section.

What is the maximum distance for the camera to connect to WiFi?

The optimal range for connectivity will depend on the camera model. Refer to the manual for specific range details.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>