DONGGUAN iCam 365 APP Dual Lens Full Color WIFI PTZ IP Camera Instruction Manual

iCam 365 APP Dual Lens Full Color WIFI PTZ IP Camera

INSTRUCTION MANUAL

A. Connect the device

Scan the QR code to download the “iCam 365” App

Download the app

Use the “Scan” function of your mobile phone to scan the QR code, download and install the “iCam365” APP

Connect power

Connect the device to the power supply and wait for about 1 minute

B. Add Device

01. log in
02. Add device
03. Scan the QR code of the fuselage
04. Waiting for a utomatic recognition
05. Select the WiFi to connect to and enter the assword
06. Show the QR code to the device lens,When you hear the beep, tick I have heard it Then click next
07. Waiting to configure the etwork
08. The addition is complete, the device is named.
09. The device will appear on your homepage

C. Common problem

WiFi password iscorrect, and the network canbe connected correctly, then RESETthe camera, and add it again after completion.
How to download video?| Click the”Record Screen· button during playback, and click thered button after recording, and the video file will be saved to thephone;
What if the display device is offline?| First confirm whether thepower supply and network arenormal, and there is no problembeforepowering off the camera and restarting it. If the connection is still disconnected
The memory card is full, what should I do?| No manual processing isrequired. When theremaining memory card capacity isless than or equal to SOOM, tt1e camera will automatically overwritethe oldest video file.
The memory card shows no memory card or abnormal| 1. Thecameradoes not support hot swapping.When inserting amemory card, it needs to be powered off. Please restart the camera.2.Thememory card is still not recognized after restarting the camera, pleasereplace with a new card and test again.3. If the new card is
still not recognized, thecard slot may be damaged or the cableis faulty.Contact the supplier to replace the device.
What should I do if I cannot receive the warning message?| Confirm whether the systemhasturned off the message pushpermission of iCam365.If it is turned off, please turn on the “message notification· permission in the phone settings
and check whether the message push is turned off in the device settings. Alarm messages are stored for up to 7 days

FCC Caution.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

*RF warning for Mobile device:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Specifications:

• Continuous app updates

• QR code for iCam 365 App download

• Connects to power supply

• Automatic device recognition

• Supports WiFi connection

• Memory card overwrite feature

• Message push notification support

Frequently Asked Questions (FAQ)

Q: What should I do if the device is unsuccessfully added?

A: Check whether the WiFi password is correct, and the network can be connected correctly, then RESET the camera, and add it again after completion.

Q: How to download video?

A: Click the Record Screen button during playback, and click the red button after recording, and the video file will be saved to the phone.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>