PORTRONICS Harmonics Klip 5 Bluetooth Headset User Manual
- June 16, 2024
- Portronics
Table of Contents
PORTRONICS Harmonics Klip 5 Bluetooth Headset
Package Contents
- Headset 1 N
- USB Type-C Charging Cable 1 N
- User manual 1 N
Specification
- Talk Time: 22hrs
- Standby Time: 180hrs
- Charging Time: 2hrs
- Bluetooth Version: V5.3
- Profile: AVCRCP, A2DP, HSF, HFP
- Operation Distance: 10M
- Weight: 22g
About Your Headset
- MIC
- LCD Power Display
- Breathing LED
- Type-C Charging Port
- Retract Button
- Vol.+
- MFB
- Vol.-
Features
- Design for Driving and Cycling
- Digital Power Display
- 22hrs Long Working Time
- IPX7 Water resistant
- Breathing LED
Pairing
- Keep pressing the MFB for 2 seconds to let the Bluetooth headset power on and automatically enter into pairing mode, breathing LED flash ice blue. Turn on Bluetooth in your mobile phone, you can search headset model no Harmonics Klip 5 and tap to connect with a mobile phone.
- If the headset cannot connect with any device within 5 minutes, the headset will power off automatically after 5 minutes.
Reset
When the headset is in charging, long press the MFB until the LED indicator flashes red and blue twice simultaneously.
Retractable Collar Clip Headset
Charging
- Use the original charge cable in a gift box to ensure safety. Please do not use a headset during charging.
- During charging, the red indicator is on.
- After the headset is fully charged, the red indicator will be off. LCD will show FF.
Support two in one:
First, let the headset successfully connect with the first device. And turn
off the Bluetooth of the device to let the headset enter into pairing mode.
Then let the headset connect with the second device. Finally, open the
Bluetooth of the first device and tap to connect again. Both devices could
connect with a headset.
Operation
Function
| Operation|
LED Indicator
---|---|---
Power on| Press MFB for 3-5s| Blue Flash with Vibration
Power off| Press MFB for 3-5s| Red Flash
Music play/pause| Press MFB once| /
Volume +| Press the volume + button for 1s| /
Volume –| Press the volume – button for 1s| /
Last track| Press volume + button for 2s| /
Next track| Press the volume – button for 2s| /
Answer/end call| Press MFB once| Incoming Call with Colorful LED Flash
Reject call| Press MFB for 2s| /
Activate Siri/voice assistance| Press MFB for 2s| /
Redial| Press MFB far twice| /
Note: Keep the device within a distance of 0.3 m during pairing.
Safety and care
- Keep the earphones away from extreme heat and humidity, high heat will increase the lifespan of the earbuds and battery.
- The earphones should be charged at least once every 6 months.
- Clean with a soft cloth, damp with diluted soap water solution if necessary, never use chemical cleaners.
- Do not drop the earphones on hard surfaces.
- Do not take the earphones apart.
- When not in use, power the earphones off and store them in a cool dry place.
Contact Information
For support
- Visit: www.portronics.com
- Emall: help@portronics.com
- Contact No.: +91 9 555245245, 011- 4 2413131
- (Working Hrs.: Monday – Saturday 10:00 am – 6:00 pm)
E-Waste Management
- E: info@3rrecycler.com
- For E-Waste & ROHS compliance refer to www.portronics.com/ewaste.