PORTRONICS KEY2 COMBO Multimedia Wireless Keyboard and Mouse User Manual

PORTRONICS KEY2 COMBO Multimedia Wireless Keyboard and Mouse

IMPORTANT SAFETY INSTRUCTIONS

When used in a directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical I shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.

1.  Water and Moisture -The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
2.  Ventilation -The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings.
3.  Heat-The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.
4.  Power Sources-The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
5.  Cleaning -The unit should be cleaned only using a warm damp cloth. Do not use solvents, etc.
6.  Objects and Liquid Entry-Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product.
7.  Attachments -Do not use attachments not recommended by the product manufacturer.
8.  Overloading-Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
9.  Periods of Nonuse-If the unit is to be left unused for an extended period of time, such as a month or longer, the battery should be remove from the unit to prevent damage or corrosion.
10.  Servicing -The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel.

Introduction

Thank you for choosing Key2 Combo, wireless keyboard & mouse. This manual will help you to understand the operation of the keyboard. It is better to familiarize yourself with the other devices before you use. Please read the manual carefully, and keep it for future references.

Product & Package Content

System Requirement

• Windows: 7/ 8/10
• Mac OS X(More than V10.4)
• Workable USB port

HOW TO USE

• Step 1 . Open the battery case & insert the battery (Pay attention to the Negative and Positive positioning.)
  Note: Before use, please tear up the battery insulating protective film.

• Step 2. Remove the receiver from the mouse.

• Step 3. Insert the receiver into the USB port of your computer/laptop.

• Step 4. Enjoy the wireless communication.

PRODUCT FEATURE

Stable Wireless Transmission
2.4Ghz wireless technology can provide o reliable connection and not subject to any interference in the 360 degrees within 30 meters.

The Ultra Smooth Chocolate Keycaps
Chocolate keycap increase the area of contact, feel more comfortable & more accurate with soundless experience.
Five Times More Power Saving Thon Ordinary Devices
The industry’s top chip gives you five times more power saving than ordinary devices. The standby time is up to 36 months.

Silent Button Design
The silent micro switch design, produce sounds can reduced about 95% than the other mouse, the service life can reach more than 3000000 times.

Troubleshooting

Mouse Not Working:

1.  Remove USB Dongle from your system, re-insert the batteries and check, if those were correctly inserted.
2.  Simultaneously press the right button, centre scroll wheel, and left button over 3 seconds to enter Pairing Mode.
3.  Re-plug the USB Receiver.
4.  Once successfully paired, move the mouse within 20 seconds to check if it is working fine.
5.  If it is still not working, please repeat all the steps.

Keyboard Not Working

1.  Remove USB Dongle from your system, re-insert the batteries, and check if those were correctly inserted.
2.  Simultaneously press the ‘Esc’ key and ‘=/+’ key, to enter Pairing mode. The rightmost indicator will stay On.
3.  Re-plug the USB Receiver.
4.  Make sure the Keyboard is kept close to the USB Receiver, and wait till the indicator light goes off. Then, you can start using your device.
5.  If it is still not working, please repeat all the steps.

PRODUCT SPECIFICATION

Mouse Specifications

**Keyboard Specifications

**

Documents / Resources

| PORTRONICS KEY2 COMBO Multimedia Wireless Keyboard and Mouse [pdf] User Manual
KEY2 COMBO, Multimedia Wireless Keyboard and Mouse, KEY2 COMBO Multimedia Wireless Keyboard and Mouse
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>