DONGGUAN 2BEVFSTSN5050 LED Strip Light User Manual

DONGGUAN 2BEVFSTSN5050 LED Strip Light

User instruction for LED Neon Rope Lights

Connecting the APP by Bluetooth, you can freely choose 16 million colours and 200+ dynamic modes. LED Neon Rope Lights have a memory function. When the strips are used again, they remember the last mode settings. You can adjust the light brightness from 1% to 100% to find a comfortable light brightness. Waterproof: This neon rope lights led strip has premium durable anti-UV and IP65 waterproof tube coating, The durable wire and the led beads are waterproof, can be used indoors and outdoors, just remember to keep the theController and power adapter (The power adapter&Controller is nor- waterproof)dry..
Reminder: This product is an RGB product and does not have RGBIC functionality.

Read and follow all safety instructions.

1. This product is used with the supplied power adapter. Keep away from sharp objects or strong corrosive chemicals
2. Although this product has good bending performance, When bending the neon strip, try not to fix it Buckle too tightly and bend too much toavoid damage The light beads then affect the lifespan.
3. Do not install neon rope lights near any heat source.
4. Do not let children install neon rope lights alone Avoid installing neon strips near potential
5. Remember to remove the insulating sheet before use the remote.
6. The Controller and power adapter is not waterproof, when use outside please protect well the Controller and power adapter.
7. Unroll the neon light led strip to test and check its function performance before using or installing.
8. If the remote doesn’t work, please try to change the battery (cr2025) of the remote.

Connection reference

Instructions for the receiving controller

You need to pay attention

• Temperature:-10°C-50°C
• Input Volt.: 12V≥22.5-3A
• Remote control distance: 10 meters
• Notes court not de used 246 verologetherwise it will burn out the

If you use an improper power supply. If the power is low you can’t bring the light.

Instructions for Control

Instructions for use of led controller

los and android systems can download the app by scanning the QR code. open the browser or other tools with ‘scan QR code” function,scan the QR code as below: app download

scan the QR code

App operation

Click Duo Col Strip on the Lotus Lantern app Icon, and enter the app page . After entering the App interface, if bluetooth is not enabled, an application wants to enable the bluetooth function of this device click allow

1. Click to show the lamp list, view lamp list:
2. Switch to colour and brightness interface:
3. Switch to the mode interface:
4. Switch to the music rhythm:
5. Switch to the microphone rhythm interface:
6. Switch to the schedule:
7. Switch to the modify pin sequence interface:

Application : Flexible enough, easy to be shaped, an ideal choice for DIY lighting and design decoration.such as, restaurants, bedrooms, exhibitions, hotel clubs, shopping mall party, wedding decor, Christmas decor, and Halloween holiday decoration lighting.

WARNING

• DO NOT IMMERSE IN FIRE|
• CHILDREN UNDER THE
• AGE OF 16 SHOULD USE THIS PRODUCT UNDER ADULT SUPERVISION.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>