lowes WS-FND56-60B Square Pandent Light User Manual
- June 15, 2024
- lowes
Table of Contents
lowes WS-FND56-60B Square Pendant Light
Company Profile
We are a leading supplier of lighting products, We have our own R & D base and
production base, the company is involved in commercial LED lighting, indoor
and outdoor lighting, and other fields, it has been recognized by many
countries and used. Providing the public environment with high-quality,
energy-saving, beautiful artificial lighting.
Warranty
WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in
materials and workmanship for 1 year from the date of purchase. This warranty
applies only to the original consumer purchaser and only to products used in
normal use and service. If this product is found to be defective, the
manufacturer’s only obligation and your exclusive remedy is the repair or
replacement of the product at the manufacturer’s discretion, provided that the
product has not been damaged through misuse, abuse, accident, modifications,
alterations, neglect or mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been
improperly installed, set up, or used in any way not by the instructions
supplied with the product. This warranty shall not apply to a failure of the
product as a result of an accident, misuse, abuse, negligence, alteration,
faulty installation, or any other failure not relating to faulty material or
workmanship. This warranty shall not apply to the finish on any portion of the
product, such as surface and/or weathering, as this is considered normal wear
and tear.
Key Dates
Installation
PARTS INCLUDED
- (A)Mounting brackets (B)Long screws
- (C)Ceiling plate (D)Nut
- (E)Wire and Iron chain (F)Boom
- (G)Iron Frame (H)Light Bulb(Bulbs not included)
- Remove all parts and place them on the upper surface.
- Drill holes in the ceiling and install rubber screwintoholes.
- The bracket(A) is fixed on the ceiling with screws(B).
- Connect the wire to the driver safely.
- Put the ceiling plate(C) into the two long screws, and secure it with Nuts(D).
- Fix the iron chain(E) and boom(F)on the ceiling plate (C) and iron frame(G).
- Install Light Bulb(G) and then turn on the power.
Care and Cleaning
EXTERIOR MAINTENANCE
Use a dry or slightly dampened clean. Cloth and wipe the surface of the
fixture
INTERIOR MAINTENANCE
Disconnect power to the fixture by turning off the circuit breaker or by
removing the fuse at the fuse box.
NOTE: Do not use any cleaners with chemicals, solvents, or harsh
abrasives. Use only a dry soft cloth to dust or wipe carefully.
NOTE: Use a dry or slightly dampened clean cloth to wipe the interior
surface of the fixture.
Concluding Remarks
- Thank you very much for your support and choose to purchase our products, If you like them, a positive review will strongly encourage us to do better in the future;
- Finally, sincerely wish you and your families a great life. If you have any questions regarding your purchase, please feel free to contact us at:
- In the USA/CA: E-mail: support02@dingliled.com.In the EU: E-mail:support03@dingliled.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>