JABLOTRON JA-162M Wireless Input Module Instruction Manual
- June 15, 2024
- JABLOTRON
Table of Contents
JABLOTRON JA-162M Wireless Input Module
Specifications
- Model: JA-162M
- Type: 5INPUTUNI2201ND
- Features: Wireless module with two universal inputs
- Manufacturer: JABLOTRON
Product Information
The JA-162M is a wireless module for the JABLOTRON system with two independent universal inputs and the option to connect a tamper contact. It can be connected to various devices such as magnetic contacts, flood sensors, or when connected to the CT-01 roller shutter movement sensor, it can also be used to detect manipulation of external window shutters.
Installation:
- Install the JA-195PL or JA-194PL installation box.
- Screw the product into the prepared raised holes.
- Assign the module to the system by entering the serial number in the F-Link software.
Setting Input Properties
The input properties are set using the DIP switches. Select the desired mode according to Table 1. The module reads the NO/NC state of both input terminals when the batteries are inserted.
Replacing Batteries
The system automatically sends a report (Low battery voltage) when the battery voltage is critically low. Ensure to put the system in Service or Maintenance mode before replacing the batteries to avoid a sabotage alarm report.
Frequently Asked Questions (FAQ)
Q: How can I reset the module?
A: To reset the module, remove and reinsert the batteries while ensuring
the input terminals are in standby mode.
Q: Can I use only one of the input terminals?
A: Yes, if only one input is used, you can remove the second input from the
system to assign it for another device.