ZEBRA TC530E Barcode Scanner Instruction Manual
- June 15, 2024
- ZEBRA
Table of Contents
- ZEBRA TC530E Barcode Scanner
- Specifications
- Product Usage Instructions
- RF Exposure Requirements
- United States and Canada Regulatory Notices
- International Compliance Statements
- United Kingdom Compliance Statement
- Software Support
- FAQ
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ZEBRA TC530E Barcode Scanner
Specifications
- Model: SE5500
- Frequency Range: 5150 to 5350 MHz
- Compliance: FCC Part 15, ICES-003, etc.
- Indoor Use Only
Product Usage Instructions
Regulatory Compliance:
The device complies with Part 15 of the FCC Rules and Innovation, Science
and Economic Development Canada’s regulations. It must be operated indoors
within the specified frequency range.
Regulatory Labeling
The device features several regulatory labels which inform about:
- LED indicators
- Compliance with specific standards and regulations
RF Exposure Requirements
The device meets FCC RF emission guidelines for SAR levels. The antenna should not be co-located with other transmitters.
Restricted Substances:
The product complies with regulations regarding restricted substances.
Refer to the provided table for details on substances and their chemical
symbols.
United States and Canada Regulatory Notices
Radio Frequency Interference Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Innovation, Science and Economic Development Canada ICES-003 Compliance Label
CAN ICES-003 (B)/NMB-003(B)
This device complies with Innovation, Science and Economic Development Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range.
RF Exposure Requirements – FCC and ISED
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of fcc.gov/oet/ea/fccid.
International Compliance Statements
Compliance statements for Japan, Brazil, China, and South Korea are included, with specific references to regulatory bodies and restrictions.
Substance Restrictions
The product is in compliance with the Chinese standard SJ/T 11364 and is
marked accordingly to indicate the presence of the following substances: lead
(Pb), mercury (Hg), cadmium (Cd), hexavalent chromium (Cr(VI)), polybrominated
biphenyls (PBB), and polybrominated diphenyl ethers (PBDE).
Substance Table
Parts | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Cr(VI) | PBB | PBDE |
---|---|---|---|---|---|---|
TC530E/TC530R | O | O | O | O | O | O |
Note 1: “Exceeding 0.1 wt%” and “exceeding 0.01 wt%” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
Note 2: “O” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 3: The “-” indicates that the restricted substance corresponds to the exemption.
United Kingdom Compliance Statement
Zebra hereby declares that this radio equipment is in compliance with the Radio Equipment Regulations 2017 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
The full text of the UK Declaration of Conformity is available at: zebra.com/doc.
UK Importer: Zebra Technologies Europe Limited
Address: Dukes Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8 5XF
Software Support
For software support and resources, please visit Zebra Support Community and the knowledge base at supportcommunity.zebra.com/s/knowledge- base.
For additional support and software updates, visit zebra.com/support.
FAQ
Where can I find the UK Declaration of Conformity for this device?
The full text of the UK Declaration of Conformity is available at
zebra.com/doc.
Where can I find SAR information for this device?
SAR information is on file with the FCC and can be found under the Display
Grant section of fcc.gov/oet/ea/fccid.
Can this device be used outdoors?
No, this device is restricted to indoor use within the specified frequency range of 5150 to 5350 MHz.
What should I do if I experience interference?
Ensure that the device is operated in compliance with FCC and ICES regulations. Contact customer support for further assistance if interference issues persist.
Are there any restrictions on using this device indoors?
Yes, when operating in the 5150 to 5350 MHz frequency range, the device is restricted to indoor use.
What are the compliance standards for this device?
The device complies with FCC Part 15, ICES-003, SJ/T 11364, and other international compliance standards mentioned in the document.
References
- êµë¦½ì „íŒŒì—°êµ¬ì› í™ˆíŽ˜ì´ì§€
- Zebra Support Community
- Zebra Support Community
- êµë¦½ì „íŒŒì—°êµ¬ì› í™ˆíŽ˜ì´ì§€
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>