EDEN 94146EDAMZ 4-Pattern Rotary Gear Drive Sprinkler with Step Spike Instruction Manual
- June 1, 2024
- EDEN
Table of Contents
EDEN 94146EDAMZ 4-Pattern Rotary Gear Drive Sprinkler with Step Spike
Product Specifications
- Product Name : 4-PATTERN ROTARY GEAR DRIVE SPRINKLER
- Spray Patterns: Flat, Fan, Mini, Large
- Features: Step Spike, Flow-through design, Filter washer, Quick Connect Starter Set
- Material: Durable zinc construction
- Compatibility: Fits all standard garden hoses and watering tools
Product Usage Instructions
Assembly
Simply attach the sprinkler head to the top of the spike. Hold the bottom of the sprinkler head and spike to tighten by hand (do not overtighten).
Connect the Hose
To extend, simply remove the back end cap attach another hose and connect another sprinkler.
Spray Pattern Adjustments
Depending on your watering needs, you can manually select from the various pattern settings:
- Flat – Provides a flat wave of water
- Fan – Disperses water in a wide fan shape
- Mini – For delicate plant watering
- Large – Covers the largest possible area
Spray Angle Adjustment
CAUTION
- For outdoor use with cold water only
- Do not spray near electrical connections
- When not in use, rinse the tool with water to remove most of the dirt, dry your tool, and store it indoors
FAQ
- Q: Is the product suitable for hot water use?
- A: No, the product is designed for outdoor use with cold water only.
- Q : How do I adjust the spray patterns?
- A: You can manually select from the various pattern settings by rotating the nozzle to the desired pattern.
- Q : Is the product compatible with all garden hoses?
- A : The product is designed to fit all standard garden hoses and watering tools.
OVERVIEW
Assembly
Simply attach the sprinkler head to the top of the spike. Hold the bottom of the sprinkler head and spike to tighten by hand (do not overtighten).
Connect the Hose
Use the Quick Connect System to easily connect and disconnect the sprinkler
from the hose. Connect the Product Adapter to the spike. Attach the lockable
Quick Connect to the end of the hose, then simply snap in the hose to the
sprinkler to begin using.
Use the additional included Product Adapter for your nozzles, wands, or other
watering tools to switch between tools, even with the water running.
NOTE: If you are not using the Quick Connect System, simply connect the
sprinkler directly to the hose.
To extend, simply remove the back end-cap and attach another hose and connect another sprinkler.
Spray Pattern Adjustments
Depending on your watering needs, you can manually select from the various pattern settings :
- Flat – The FLat pattern will provide a wave of water.
- Fan – The fan pattern disperses water in a wide fan shape.
- Mini – Provides delicate plant watering.
- Large – Covers the largest possible area
Spray Angle Adjustment
Adjust the tabs to change the spray coverage to FIt your needs (from 5°up to
360°)
CAUTION
- For outdoor use with cold water only
- Do not spray near electrical connections
- When not in use, rinse the tool with water to remove most of the dirt, dry your tool, and store indoors
WARNING : This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
The Quick Connect Adapter (2 pcs) and Hose Connector with Water Stop (1 pc) simplify your watering experience. Simply attach the connector at the end of your hose. Then, connect the adapters to your watering tools. Interchange various tools in a snap without turning off the water as the adapter will stop the water flow. No more kinking or hose twisting as the adapter allows the hose to swivel 360 degrees.
CONTACT
- www.edengarden.com
- Made in Taiwan