Meetion DirectorC Ergonomic Multi-Device Bluetooth Keyboard and Mouse Owner’s Manual
- June 14, 2024
- MEETION
Table of Contents
Meetion DirectorC Ergonomic Multi-Device Bluetooth Keyboard and Mouse
MULTIMEDIA FUNCTION KEYS
2.4G CONNECTION MOUSE
- Turn power switch
- Remove the USB receiver at the bottom of the mouse
- Press the mode switch button to switch to 2.4G mode, and the light is green
- When the product used porters me alternate hardware installation prompt willer thie computer
2.4G CONNECTION KEYBOARD
- Turn on the keyboard power switch
- Tap here to enter 2.4G mode
- Insert computer USB interface
(When the product is used for the first time, an automatic hardware installation prompt will pop up in the lower right corner of the computer)
BLUETOOTH CONNECTION
MOUSE
- Turn on the mouse power switch
- Short press the mode switch button, switch to Bluetooth 1, then the blue light flashes you can perform code matching
- Turn on the mouse power switch
- Short press the mode switch button, switch to Bluetooth 1, then the blue light flashes you can perform code matching
- Click to add Bluetooth or other devices, click to add Bluetooth mouse, keyboard, and other devices
- Paired successfully
- Turn on the mouse power switch
- Short preeton 2, them tre but in nashes you can perform code matching
- Turn on the computer Bluetooth switch to enter the Bluetooth settings page
- Find the device named Meetion_MS_BT2 and click on Add Pairing
- Click to add Bluetooth or other devices, click to add Bluetooth mouse, keyboard, and other devices
- Paired successfully
KEYBOARD
- Turn on the keyboard power switch
- Click here to enter Bluetooth 1 mode pairing, blue light flashing
- Turn on the computer Bluetooth switch to enter the Bluetooth settings page
- Find the device named Meetion_K- B_BT1 and click on Add Pairing
- Click to add Bluetooth or other devic- es, click to add Bluetooth mouse, keyboard, and other devices
- Paired successfully
- Turn on the keyboard power switch
- Click here to enter Bluetooth 2 mode pairing, blue light flashing
- Turn on the computer Bluetooth switch to enter the Bluetooth settings page
- Find the device named Meetion_K- B_BT2 and click on Add Pairing
- Click to add Bluetooth or other devic- es, click to add Bluetooth mouse, keyboard, and other devices
- Paired successfully
CHARGE INDICATION MOUSE
- This red light is blinking, the battery is low
- This red light is always on, and the battery is charging
- Red light is off, battery is fully charged
NOTE : The charging voltage should not exceed 5V, otherwise the product circuit will be damaged.
CHARGE INDICATION KEYBOARD:
- This red light is blinking, the battery is low
- This green light is always on, the battery is charging
- The green light is off, the battery is fully charged
NOTE : The charging voltage should not exceed 5V, otherwise the product circuit will be damaged.
DPI ADJUSTMENT MOUSE
- Press the DPI button once, 800 DPI (slow cursor movement)
- Press the DPI button again, 1200 DPI (cursor moves moderately)
- Press the DPI button again for 1600 DP! (faster cursor movement)
- Press the DP brastes curst movement)
GENERAL
The pods in a it in oronto ut mot with the US FC standards withFOC ID: 29706.
PRECAUTIONS
- This product contains a rechargeable lithium battery.
- Do not dismantle, strike, crush, or put it into a fire.
- Stop using it immediately if severe swelling occurs.
- Do not place it in a high-temperature environment.
- Do not use this device near water.
- Only use a dry cloth to clean this product.
- Please follow the manufacturer’s instructions for use.
- If the device is damaged, for example, if liquid enters it, if it gets wet in the rain orders, is out enised quite mailin meets onelied. For repair
WARRANTY CARD
Having technical problems with this product?
Send an email to service@meetion.com
For more information please visit: www.meetion.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>