Gravity GFDJT01 DJ Desk with Adjustable Laptop and Loudspeaker Trays Instruction Manual
- October 30, 2023
- Gravity
Table of Contents
Gravity GFDJT01 DJ Desk with Adjustable Laptop and Loudspeaker Trays
SAFETY INFORMATION
- Please read this User’s Manual carefully before you begin with the installation and setting up.
- Keep all information and instructions in a safe place.
- Follow the instructions.
- Please pay particular attention to the safety warnings. Never remove safety warnings or other information from the product.
- When setting up the product, be careful and protect yourself from injuries.
- Please ensure that the product is on a flat surface, as the equipment might tip over.
- Make sure that all screws are tight and check them from time to time. Do not over-tighten the screws.
- This product is intended solely for indoor use. Using it outdoors can cause damage to the product and result in personal injury.
- Do not make any modifications to the product.
- When recycling, observe the applicable safety regulations for your country. Please separate plastic and paper/cardboard when recycling.
- Plastic bags must be kept out of reach of children.
- If you have any questions about this User’s Manual or the safety instructions, please contact your specialist dealer/distributor.
INTRODUCTION
Creativity has no limits, but workspace certainly does. A place where you can unfold without limits is the Gravity® FDJT 01 DJ desk. On it you keep your set-up compact and always ready for the moment when inspiration strikes. Your trusty monitors can be placed on height-adjustable, 360° rotatable, and 15° tiltable trays. The precise positioning and inclination of your loudspeakers is made much easier for you by a precise scale on the tubes. Your laptop is enthroned at the heart of your set-up in the middle of the table, held firmly in place by the integrated pins so that even if tilted extremely, it is always secure. Both loudspeaker and laptop trays can be adjusted precisely along the rear rail of the Gravity® FDJT 01 DJ Desk by shifting them to the left or right. You will have no trouble adapting the desk to your individual height. It can be set between 680 mm and 1090 mm and offers you plenty of space for your equipment – with a usable depth of 500 mm and a width of 1190 mm. The adjustable leveling feet ensure greater stability, as they can compensate for any uneven floors.
- Sturdy desktop – adjustable height
- Speaker tray – adjustable height, tilt, and rotation
- Laptop tray with adjustable holding pins
- Speaker and laptop trays can be shifted left and right
- Leveling feet for greater stability
Creativity has no limits, but workspace certainly does. A place where you can unfold without limits is the Gravity® FDJT 01 DJ Desk. On it you keep your set-up compact and always ready for the moment when inspiration strikes. The DJ Desk offers enough space to place two decks and a mixing console or your DJ controller. Your performance setup with samplers, sequencers, and synthesizers will also find enough room thanks to a surface depth of 50 cm and a width of 119 cm. In case you need additional space, simply expand the Gravity® DJ Desk with an optionally available laptop holder or two studio monitor holders. The rear rail also offers further flexible expansion options that are tailored to your individual needs as a DJ, producer or instrumentalist. You will have no trouble adapting the desk to your individual height. It can be set between 68 cm and 109 cm More stability is provided by the adjustable leveling feet, which compensate for any unevenness of the floor, and the mountable crossbar, which significantly strengthens the table.
- Robust, height-adjustable table
- Leveling feet to compensate for uneven surfaces
- Crossbar for added stability
- Option to expand with optionally available accessories
MOUNTING ACCESSORIES
- Z1) 4x screws M8*20 Hexagon socket pan head
- Z2) 2x screws M6*20 Hexagon socket pan head
- Z3) 8x screws M5*8 Hexagon socket countersunk head
- Z4) 4x M5 Black zinc cover nut
- Z5) 3x M8 Hexagon nuts
- Z6) 3x screws M8 Hexagon socket countersunk head (already installed)
- Z7) 3x M8*50 Medium round knob
- Z8) 1x 4mm Allen wrench
- Z9) 1x 6mm Allen wrench
- Z10) 4x M8 washers
- Z11) 1x M8*50 Lock screw
- Z12) 1x M8*40 Lock screw
- Z13) 2x M8*25 Lock screw
- Z14) 4x Large round knob, M8 Female Thread
- Z15) 4x M5 washers
ASSEMBLY GROUPS FOR INSTALLATION
- A) 1x Desk panel
- B) 1x Leg frame bar
- C) 1x Monitor tray (Only included with GFDJT01)
- D) 1x Laptop tray (Only included with GFDJT01)
- E) 1x Monitor tray (Only included with GFDJT01)
- F) 2x Monitor stand; 1x Laptop stand (Only included with GFDJT01)
- G) 1x Left leg frame; 1x right leg frame
- H) 1x Crossbar
ASSEMBLY INSTRUCTIONS
GFDJT01
GFT01
Gravity® is a registered brand of the Adam Hall Group. Adam Hall GmbH | Adam- Hall-Str. 1 61267 Neu-Anspach | Germany.Phone: +49 60 81 · 94 19-0 adamhall.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>