HENCO 1625 Secor Panel Underfloor Heating Base Plate Owner’s Manual
- June 15, 2024
- HENCO
Table of Contents
HENCO 1625 Secor Panel Underfloor Heating Base Plate
Product Information
Specifications
- Model: UFH-DRY-1625-150F: SECOR PANEL 1625, c150 – 25mm
- Material: Plastic
- Surface Protection: Untreated
Technical Characteristics
- Modular Spacing: 0 Millimeter
- Length: 1175 Millimeter
- Width: 750 Millimeter
- Thickness: 25 Millimeter
Commercial Information
Version: 24/04/2024 Data subject to change
Product Usage Instructions
Installation
- Ensure the surface where the panel will be placed is clean and dry.
- Position the panel in the desired location, ensuring proper alignment.
- Secure the panel using appropriate fasteners or adhesives based on the surface type.
- Repeat the process for additional panels if needed, maintaining consistent spacing.
Maintenance
To maintain the panel’s appearance and functionality, regularly clean it with
a mild detergent and a soft cloth. Avoid using harsh chemicals that may damage
the surface.
Storage
Store the panels in a dry and cool environment away from direct sunlight to
prevent any potential warping or damage.
Disposal
When disposing of the panel, follow local regulations for proper waste
management. Consider recycling options if available.
Warranty
Refer to the warranty information provided with the product for details on
coverage and claim procedures.
Frequently Asked Questions (FAQ)
-
Q: Can the panel be painted?
A: It is recommended to consult the manufacturer before painting the panel to ensure compatibility with the surface treatment. -
Q: Is the panel suitable for outdoor use?
A: The panel is designed for indoor use. Extended exposure to outdoor elements may affect its performance and longevity. -
Q: How can I cut the panel to fit a specific area?
A: Use appropriate tools such as a saw or utility knife to carefully cut the panel to the desired size. Wear appropriate safety gear during the cutting process.
Commercial information
HENCO SECOR is a dry system with a very low construction height. The
absence of a screed ensures a quick installation and low thermal inertia. The
panels already have an aluminium layer for optimum heat emission. Henco Secor
is installed with Henco multilayer pipes and is only laid in a meandering
pattern.
The floor finish can be applied immediately after installation of the
underfloor heating, making the system the ideal solution for renovations.
The main advantages of HENCO SECOR are:
- Very low construction height
- Low thermal inertia
- Short drying time (no screed)
- Floor finish can be applied immediately
- Very light weight
- Suited for renovations
Certificates
-
Applications
Heating, Cooling, Underfloor Heating -
Solutions
Underfloor heating, Building installations, Industry, Utility
Technical characteristics
- Material: Plastic
- Surface protection: Untreated
- Modular spacing: 0 Millimetre
- Length: 1175 Millimetre
- Width: 768 Millimetre
- Thickness: 25 Millimetre