HENCO M-BM1620 Press Machine with 16 20 Jaws Owner’s Manual
- June 15, 2024
- HENCO
Table of Contents
HENCO M-BM1620 Press Machine with 16 20 Jaws
Product Information
Specifications
-
Product Model: M-BM1620
-
Kit: Manual press machine with 16, 20 jaws
-
Related Products:
-
Suitable for Pipe Diameter: 16|20
Millimeter -
Nominal Voltage: 0 Volt
-
Battery Capacity: 0 Ampere hour
-
Number of Included Batteries: 0
-
Length: 600 Millimeter
-
Weight: 2.3 Kilogram
-
Product Usage Instructions
- Ensure the press machine is suitable for the type of application (potable water, heating, cooling, etc.)
- Insert the appropriate jaw size (16 or 20) into the press machine.
- Place the steel tube to be pressed within the jaws of the machine.
- Activate the press machine which will initiate the forced process to press the tube.
- The machine will automatically switch off upon completion of the pressing process.
- After usage, store the press machine in the provided case and on the charging cradle for next use.
FAQ
- Q: Can this press machine be used for shipbuilding applications?
- A: Yes, this press machine is suitable for shipbuilding applications among other industries listed in the commercial information section.
- Q: Is it safe to use this press machine for gas-related installations?
- A : Yes, the press machine can be used for gas-related installations as mentioned in the commercial information section. However, always follow safety guidelines and regulations when working with gas.
- Q: How do I know which jaw size to use for a specific pipe diameter?
- A: Refer to the pipe diameter specifications to determine whether to use the 16 or 20 jaw size for optimal results.
M-BM1620 : Kit: manual press machine with 16, 20 jaws
Commercial information
Set with a hand-held press machine with inserts 16 and 20
Certificates
Applications
Potable water, Heating, Cooling, Compressed air, Underfloor Heating, Gas, Sanitary
Solutions
Building installations, Industry, Underfloor heating, Oil & gas, Utility, Shipbuilding
Technical characteristics
Version 24/04/2024
Data subject to change
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>