NYXI Master P1 Wireless PC Controller Owner’s Manual

NYXI Master P1 Wireless PC Controller

Dear Gamer,

Thank you for purchasing our product.
Before you use the product, please read the product manual carefully.

Compatibility

• Supports Android 10.0/iOS 14 and above.
• Supports NS 3.0.0.0 and above.
• Supports PC (Win 718/10/11)

Packaging Contents

• Game   Controller 1, A-C Charging Cable 2m 1, Receiver *1
• User Manual *1

Technical Parameters

• Model: NP01
• Input Parameters: 5V/0.6A
• Material: PC+ABS
• Battery Capacity: 600mAh
• Charging Time: 2.5 hours or so
• Battery Life: 8 hours or so

Instructions for Use

For detailed instructions and more product features, please scan the QR code below.

• First-time connection: The controller needs to be connected to the charging cable, and it can only be powered on and used after charging activation.
• Receiver connection: Switch the toggle to the receiver position, press the home button to power on, and enter pairing mode. The receiver will automatically pair successfully.
• Wired connection: Connect the controller via the cable, and the controller will automatically power on and connect.
• Bluetooth connection: Switch the toggle to the Bluetooth position, then press the home button to power on. Next, search for the product name in the device, click on Master P1 to connect.
• NS connection: Switch the toggle to the NS position, select “controllers” change grip/order” in the NS settings, then wait for automatic connection.
• Auto-reconnect: Press the home button on the controller to automatically reconnect.
• Forced pairing: When the controller is off, long-press the home button for 3 seconds, and the controller will enter forced pairing mode.

Model: NP01

FCC ID: 2A88F-NP01

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. The device may not cause harmful interference.
3. The device must accept any interference received, including that may cause undesired operation.
4. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class C digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the distance between the equipment and the receiver.
• Plug the equipment into a socket on a circuit different from that to which the receiver is connected.
• Consult your distrbutor or an experienced radio/TV technician for help.

The symbol means the product should not be disposed of with household waste but be brought to an appropriate collection point to enable recycling.
According to local regulations, do not dispose of the product or rechargeable battery with normal household waste.
Appropriate disposal of used products and rechargeable batteries helps to prevent negative impacts on the environment and human health.

PRECAUTIONS

• Do not expose it to liquid
• Do not disassemble it
• Avoid dropping it
• Avoid extremely high or low temperature

MADE IN CHINA

• Manufacturer: Shenzhen MIKE Morgan Technology Co., Ltd
• Address: Room 302, Building 5, Zone C, Jinxiu Huacheng Park, Bantian Street, Longgang District, Shenzhen
• Applicant: NYXI Gaming Inc
• Address: 4520 Centennial BIvd NUM1004, Colorado Sorinas CO 80919
• Model: NP01 SN: NP012024052111

Declaration of Conformity

Model: NP01

• The product conforms to EC standards for radio interference. Here, Shenzhen MIKE Morgan Technology Co., Ltd. Shenzhen announced that SP04 radio equipment conforms to the Directive.
• EN IEC 62368-1:2020+A11:2020, EN 50663:2017, EN 62479:2010, ETSI EN 301 489-1 V2.23(2019-11), ETSI EN 301 489-17 V3.2.4(2020-09), ETSI EN 300 328 V2.2.2(2019-07).
• The full text of the EU Declaration of Compliance can be found at: www.nyxigame.com
• TOPGAME TECHNOLOGY LIMITED
• COMPANY
• ul. NOWOGRODZKA, nr 64, lok. 43
• Warsaw
• 02-014
• Email:[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>