THERMOS 186400 Vacuum Insulated Stainless Steel Direct Drink Bottle User Guide

June 13, 2024
Thermos

THERMOS-logo

THERMOS 186400 Vacuum Insulated Stainless Steel Direct Drink Bottle

Product Information

Specifications

  • Product Type: Vacuum Insulated Stainless Steel Direct Drink Bottle
  • Care Instructions: Hand wash recommended, top-rack dishwasher-safe
  • Material: Stainless Steel
  • Features: Direct Drink Lid with Lock Ring, Tea Infuser (if present)

Product Usage Instructions

General Care

  • Before first use, wash all parts with warm, soapy water. Rinse thoroughly and allow to dry.
  • Do not leave contents in the container for more than 24 hours.
  • Avoid abrasive cleaners, bleach, or chlorine-based cleaners.
  • Hand washing is recommended over dishwasher use.
  • Ensure thorough cleaning to prevent trapped residues.

Assembly and Use – Direct Drink Lid with Lock Ring

  1. Remove the lid by twisting it counterclockwise.
  2. Wash all parts, including gaskets, separately.
  3. Fill the container with contents, leaving space for the lid.
  4. Reassemble the lid ensuring gaskets are properly seated.
  5. To drink, follow the steps for unlocking and opening the lid.
  6. After drinking, close and lock the lid cover securely.

Assembly and Use – Direct Drink Lid with Tea Infuser

  1. Follow the steps for opening and cleaning the Direct Drink Lid.
  2. Remove the tea infuser and disassemble it for cleaning.
  3. Insert tea leaves into the infuser and reassemble.
  4. Place the infuser back into the lid securely.
  5. Fill the container with hot water up to the desired height.
  6. For the best tea brewing, follow the tea manufacturer’s instructions.

VACUUM-INSULATED STAINLESS STEEL DIRECT DRINK BOTTLE

GENERAL CARE

  •  Before first use, wash all parts with warm, soapy water. Rinse all parts thoroughly and allow time to dry.
  •  Contents should not be left in the container for longer than 24 hours. As soon as possible after every use, wash all parts with warm, soapy water. Rinse all parts thoroughly with clean water. Allow all parts to dry completely before the next use or storage.
  •  DO NOT use abrasive cleaners or scrubbers since they may dull the finish.
  •  DO NOT use bleach or cleaners containing chlorine on any parts of the product.
  • This product is top-rack dishwasher safe; however, washing by hand is recommended as the dishwasher uses harsher detergents and hot water that may affect the appearance of your product.
  • Residual liquids, foods, or other contents may become trapped between product components, such as lid parts, container parts, gaskets (flexible band around lid and/or stopper), or straws (if present in the product). Although this product is top-rack dishwasher safe, hand washing is recommended to ensure that all parts of the product are thoroughly cleaned.

ASSEMBLY AND USE
DIRECT DRINK LID WITH LOCK RING (IF PRESENT)

  1.  Remove lid (A) by twisting counterclockwise.
  2.  Pull down the locking ring (C1) located on the lid (A). Press the push-button (C) on the lid (A) to open the lid cover (B).
  3.  Remove the o-ring gasket (A1) from the underside of the lid (A).
  4.  Remove lid cover gasket (B1) from lid cover (B).
  5.  Wash all parts separately, then re-assemble.
    • Ensure both gaskets (A1 and B1) are properly seated to minimize leaking.
  6.  Fill the container with contents. Do not overfill: Leave space for the lid (A), to avoid overflow.
  7.  Replace the lid (A) by twisting it clockwise.
  8.  To drink, pull down the locking ring (C1) (if present) located on the lid (A) of the bottle. Push the button (C) located on the lid (A) of the bottle, which will release the lid cover (B) and reveal the drink opening.
  9.  When finished drinking, close and lock the lid cover (B) by securing the locking ring (C1) over the button (C).

DIRECT DRINK LID WITH TEA INFUSER (IF PRESENT)

  1. Remove lid (A) by twisting counterclockwise. Follow the above instructions for opening and cleaning the Direct Drink Lid.
  2. Remove the tea infuser (E) from the o-ring gasket (A1) by gently pulling it in a downward direction.
  3. Remove the top of the tea infuser (E1) by gently pulling up on the black tab (E2).
  4. Wash all parts separately.
  5. Insert tea leaves into the tea infuser (E) and replace the top of the tea infuser (E1).
  6. Hold the tea infuser (E) upright and gently push the tea infuser into the o-ring (A1) on the lid (A).
  7. Fill the container with hot water up to the desired height. If the tea infuser (E) is not fully submerged in water, close and lock the product and tip the product to infuse it from any angle. Do not overfill: Leave space for the lid (A) and the rest of the tea infuser (E), to avoid overflow.
  8. For best tea brewing results, follow the instructions provided by the manufacturer of your tea.
  9. Carefully remove the tea infuser from the bottle after brewing. – Use caution when removing as the tea infuser may be hot. Replace the lid and sip cautiously.
  10. To drink, pull down the locking ring (C1) (if present) located on the lid (A) of the bottle. Push the button (C) located on the lid (A) of the bottle, which will release the lid cover (B) and reveal the drink opening.
  11.  When finished drinking, close and lock the lid cover (B) by securing the locking ring (C1) over the button (C).

See the WARNINGS Section below for further details.

DIRECT DRINK LID WITH SLIDE LOCK (IF PRESENT)

  1.  Remove lid (F) by twisting counterclockwise.
  2.  Unlock the slide lock (G1) by sliding the lever to the “unlocked” position.
  3. Press the push-button (G) on the front of the lid (F) to open the lid cover (H).
  4.  Remove the o-ring gasket (F1) from the underside of the lid (F).
  5.  Remove lid cover gasket (H1) from lid cover (H).
  6.  Wash all parts separately, then re-assemble. a. Ensure both gaskets (F1 and H1) are properly seated to minimize leaking.
  7. Fill the container with contents. Do not overfill: Leave space for the lid (F), to avoid overflow.
  8.  Replace the lid (F) by twisting it clockwise.
  9. To drink, push the button (G) located on the lid (F) of the bottle, which will release the lid cover (H) and reveal the drink opening.
  10. When finished drinking, close and lock the lid cover (H) and lock the product by switching the slide lock (G1) to the “locked” position.

WARNINGS

  •  DO NOT use the product in the microwave, the stovetop, or in any type of oven.
  • NOT RECOMMENDED FOR USE BY CHILDREN: Keep out of the reach of children, especially when a product contains hot contents, which may burn or scald the user.
  • Always test the temperature ure of the contents before consuming.
  • DO NOT overfill the container: Leave space at the top of the container for the lid and stopper (if present), to avoid overflow. Hot contents may burn or scald the user if overflow occurs.
  •  Check periodically to make sure any gasket (flexible band around lid and/or stopper) is present and properly positioned to prevent contents from passing through the lid when the lid is closed. Missing, worn, or misaligned gaskets may cause the product to leak. Leakage of hot contents may burn or scald the user.
  • In general, contents should not be left in a container for longer than 24 hours. However, the rate at which contents spoil depends on several factors. Certain contents that include, for example, dairy and/or tomato may start to spoil sooner. Proceed with caution when using the product with quickly spoiling contents.
  •  If contents are left in the container longer than 24 hours, or you suspect spoilage, use caution when opening the container. Contents spoilage can cause pressure inside the container to build, possibly leading to the forceful ejection of the stopper or contents. In such circumstances, before attempting to open the container, ENSURE THE OPENING IS POINTED AWAY FROM THE USER OR OTHER PERSONS TO AVOID INJURY.
  • DO NOT use tools or devices to force the container to open.
  • If you are unable to open a container by hand, do not open it and dispose of it at your local waste facility.
  • DO NOT use to store or carry carbonated drinks or dry ice. This may cause the lid/stopper and contents to eject forcefully or leak.

LIMITED WARRANTY
Thermos L.L.C. warrants this Genuine Thermos Brand product to be free from defects in material or workmanship for five years from the date of purchase or the date of delivery (whichever is later). This warranty does not cover ordinary wear and tear color fading, or any condition affected by abuse, neglect, alteration, accident, or improper use or maintenance. We will, at our option, repair or replace any product part that fails to conform to this warranty within 30 days after its receipt by our factory service department. IN NO EVENT WILL THERMOS BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. Some jurisdictions do not allow the exclusion of incidental, consequential, or special damages, so the preceding exclusion may not apply to you. This is a factory guarantee. Please do not return this product to the retailer. Send defective unit or component along with a written explanation of the defect directly to: Thermos L.L.C. – Warranty Service 355 Thermos Road Batesville, MS 38606, USA 1-800-831-9242 www.thermos.com In Canada: 1-800-669-7065 www.thermosbrand.ca This warranty gives you specific legal rights and you may also have other rights, which vary from state to state or province to province.

THE FOREGOING WARRANTY IS EXCLUSIVE AND INSTEAD OF ALL OTHER WARRANTIES, REPRESENTATIONS OR CONDITIONS OF QUALITY AND PERFORMANCE, WHETHER WRITTEN, ORAL OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SUCH IMPLIED WARRANTIES, REPRESENTATIONS AND CONDITIONS ARE HEREBY DISCLAIMED. THE REMEDIES STATED HEREIN CONSTITUTE THE PURCHASER’S EXCLUSIVE REMEDIES AND THERMOS’S ENTIRE LIABILITY FOR ANY BREACH OF WARRANTY. © 2021, 2024 Thermos L.L.C. All rights reserved. THERMOS is a registered trademark in over 115 countries.

FAQ

Q: Can I use the product for both hot and cold beverages?
A: Yes, the product is suitable for both hot and cold beverages. Please follow the care instructions accordingly.

Q: Is the product leak-proof?
A: When properly assembled and sealed, the product is designed to be leak- proof. Ensure gaskets are seated correctly.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Thermos User Manuals

Related Manuals