wentronic 70182 Power Bank Slimline User Manual

wentronic 70182 Power Bank Slimline

Specifications

Symbols used

Safety instructions

The user manual is part of the product and contains important information for correct use.

• Read the user manual completely and carefully before use. The user manual must be available for uncertainties and passing the product.
• Keep this user manual.
• Do not open the housing.
• Do not modify products and accessories.
• Do not short-circuit connectors and circuits.
• Do not operate a device if it is not in working order. In such cases, it must be secured against unintentional further use.
• Use product, product parts and accessories only in perfect condition.
• In case of questions, defects, mechanical damage, trouble and other problems, non-recoverable by the documentation, contact your dealer or producer.
• Avoid stresses such as heat and cold, moisture and direct sunlight, micro-waves, vibrations and mechanical pressure. Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation against accidental use.

Battery hazards
The batteries are not replaceable. Batteries may be damaged and leak if not used for the intended purpose.

• Leave leaked, deformed or corroded batteries inside the product and dispose of it with appropriate protectives.
• Never throw batteries into a fire. Extreme heat can lead to explosion and/or leakage of corrosive liquid.
• Do not deform or disassemble the battery. Mechanical damage can cause gaseous substances to escape, which can be highly irritating, flammable or toxic.
• Do not immerse the battery in liquids. There is a danger of explosion, fire, heat, smoke and/or gas.
• Do not operate the product in an explosive environment.

Heat storage
Heat is generated during inductive charging.

• Make sure that there are no metal parts on the back of your device (e.g. metal cover, metal plate for magnetic holder). Metal heats up strongly in the induction field and can cause damage to the product or your end device.
• Do not cover the product.

Magnetism
The product contains magnetic materials.

• Consult a medical professional before you use the product to make sure it is compatible with implanted medical devices.
• Maintain a minimum distance of 20 cm from medical devices. Do not operate and/or store the product near credit, debit or other bank cards.

Description and Function

Product
The product is a mobile auxiliary battery with an LED status indicator and is used to charge and operate devices via a cable connection or a wireless charging interface. The charging interface is equipped with a magnetic ring that ensures that the power bank automatically docks with compatible devices during charging (e.g. smartphones with MagSafe technology).

Scope of Delivery
Magnetic Wireless Power Bank 5,000/10,000 mAh, Charging cable, User Manual

Operating Elements
See Fig. 1.

1. LED status indicator
2. Function button
3. Wireless charging
4. USB-CT™ socket
5. USB-C™ plug
6. USB-C™ plug

Intended Use
We do not permit using the device in other ways as described in the chapter „Description and Function” or in the „Safety Instructions” Use the product only in dry interior rooms. Not attending to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property. This product is intended exclusively for private use and its intended purpose. This product is not intended for commercial use

IPX0 : This product is not protected against water.

Preparation

1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all used devices and ensure compatibility.

Connection and Operation

Checking the Battery Status

• Briefly press the function button (2) to display the battery status. The LED status indicator (1) shows the charging status. One LED represents a 25 % charge level. The power bank is fully charged when all four lights on the LED status display are illuminated.
• If the battery voltage drops below 3.2 V, the status indicator flashes. In this case, the power bank must be charged.
• Avoid leaving the powerbank in a fully discharged state for a longer period of time because this may damage the battery.
• If no devices are connected for charging or a voltage source is connected, the status indicator goes out after approx. 35 seconds.

Charging the Power Bank
The power bank is supplied partially charged. Fully charge the power bank before using it for the first time!

1. Connect the USB-C™ socket of the power bank to a USB power source via the charging cable. This can either be a 230 V USB charging adapter, a 12/24 V car USB charger or the USB socket of a PC. During charging, the LED status indicator lights flash. While the power bank is charging, the wireless charging function can be used at the same time.
2. Disconnect all cable connections after charging.

Charging via Cable Connection

1. Connect your device to the USB-C™ socket using a suitable charging cable. Your device will be charged automatically. During the charging process, the right-hand LED status indicator lights up green continuously.
2. Disconnect all cable connections after charging.

Charging via Charging Interface

1. Position the wireless charging interface of the power bank on the back of a compatible device (e.g. smartphone with MagSafe technology). Due to the magnetic ring, the power bank docks at the perfect charging position and the device starts charging. If you are using a protective cover, the magnetic connection may not be strong enough to hold the weight of the connected device securely. We therefore recommend removing the protective cover before charging to ensure a firm hold. When using a device without Mag Safe technology: There is no magnetic connection to hold the weight of the connected power bank securely. Position the power bank on a flat surface. Place the device to be charged on the wireless charging interface of the power bank.
2. Disconnect all cable connections after charging.

Maintenance, Care, Storage and Transportation

NOTICE! Material damage

• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Charge the batteries every three months to ensure they maintain capacity when not in use for an extended period of time.
• Store the product out of the reach of children and in a dry and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.

Disposal Instructions
According to the European WEEE directive, electrical and electrical equipment must not be disposed of with consumer waste. Its components must be recycled or disposed of apart from each other. Otherwise, contaminative and hazardous substances can damage health and pollute the environment. As a consumer, you are committed by law to dispose of electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the device’s lifetime for free. Particulars are regulated by national rights. The symbol on the product, in the user manual, or on the packaging alludes to these terms. With this kind of waste separation, application, and waste dispo- sal of used devices you achieve an important share to environmental protection.

WEEE No: 82898622

EU Declaration of Conformity
Hereby Goobay, a registered trademark of Wentronic GmbH, ensures that the mentioned radio system type conforms to Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following Internet address: https://www.wentronic.com/en/

Enter the item number in the search bar to go to the specific item page. The current declaration of conformity is available in the download section.

REV2024-04-23 Subject to change without notice.
Goobay® by Wentronic GmbH | Pillmannstraße 12 38112 Braunschweig | Germany | cs@wentronic.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>