Wentronic 64675 Wireless Quick Charger Instruction Manual

Wentronic 64675 Wireless Quick Charger

Product Information

Specifications

• Connection: USB-CTM socket
• Input: 9.0 V, 2.0 A; 12.0 V, 1.5 A
• Wireless output: 7.5 W, 10.0 W, 15.0 W max.
• Charging area: 5 x 5 mm
• Charging distance: 5-8 mm
• Compatibility to devices: All devices supporting the Qi standard for inductive charging
• Supported charging standards: Qi Extended Power Profile (Qi-EPP)
• Protection against: overcurrent, overtemperature, short circuit, Foreign Object Damage (FOD)
• Frequency band: 110-205 kHz
• Dimensions | Weight: 94 x 94 x 10 mm | 49 g
• Adapter cable Connections: USB-A plug, USB-CTM plug
• Cable length | Weight: approx. 1 m | 23 g

Safety Instructions

• Do not operate the charger if it is not in working order.
• Ensure the charger is placed in a clean and dust-protected environment when not in use.

FAQ

• Q: What devices are compatible with this wireless charger?
  • A: All devices supporting the Qi standard for inductive charging can be used with this charger.
• Q: How do I know if my device is charging on the pad?
  • A: The LED indicator on the charger will show the charging status of your device.
• Q: Can I use a different cable to connect the charger to a power source?
  • A: It is recommended to use the provided USB-A to USB-CTM cable for optimal performance and safety.
• Q: What should I do if the charger malfunctions?
  • A: If you experience any issues with the charger, discontinue use immediately and contact customer support for assistance.

Specifications

Symbols used

• For indoor use only / IEC 60417- 5957
• Direct current / IEC 60417- 5031

Safety Instructions

The user manual is part of the product and contains important information for correct use.

• Read the user manual completely and carefully before use.

The user manual must be available for uncertainties and passing the product.

• Keep this user manual.
• Do not open the housing.
• Do not modify product and accessories.
• Do not short-circuit connectors and circuits.
• Do not operate a device if it is not in working order. In such cases, it must be secured against unintentional further use.
• Use product, product parts and accessories only in perfect condition.
• In case of questions, defects, mechanical damage, trouble and other problems, non-recoverable by the documentation, contact your dealer or producer.
• Avoid stresses such as heat and cold, moisture and direct sunlight, microwaves, vibrations and mechanical pressure.
• Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation against accidental use.

Heat storage

• Heat is generated during inductive charging.
• Make sure that there are no metal parts on the back of your device (e.g. metal cover, metal plate for magnetic holder).
• Metal heats up strongly in the induction field and can cause damage to the product or your end device.
• Do not cover the product.

Magnetism

The product contains magnetic materials.

• Consult a medical professional before you use the product to make sure it is compatible with implanted medical devices.
• Maintain a minimum distance of 20 cm from medical devices.
• Do not operate and/or store the product near credit, debit or other bank cards.

Description and function

Product

The product is an inductive charger including adapter cable for wireless charging of mobile devices that support the Qi standard (e.g. smartphones). The charger can be connected to a PC, USB charging adapter or USB car charging adapter via the adapter cable. In order to use the Quick Charge (QC) function, a charging adapter with QC technology is required (not included).

Scope of delivery

• Wireless Quick Charger 15 W,
• Adapter cable,
• User Manual

Operating Elements

See Fig. 1.

1. Charging interface
2. USB-C™ socket
3. Status LED
4. USB-A plug
5. USB-C™ plug

Intended Use And Preparation

Intended Use

We do not permit using the device in other ways like described in chapter „Description and Function“ or in the „Safety Instructions“. Use the product only in dry interior rooms. Not attending to these regulations and safety instructions might cause fatal accidents, injuries, and damages to persons and property.

Preparation

1. Check the scope of delivery for completeness and integrity.
2. Compare the specifications of all used devices and ensure compatibility.

Connection and operation

1. Connect the charger to a suitable power source via the adapter cable. This can be either a 230 V USB charging adapter, a 12/24 V car USB charger or the USB socket of a PC. To use the full power, a USB charging adapter with QC technology is required (not included). As soon as the charger is connected to a power source, the status LED flashes green and blue and then goes out.
2. Place your device on the charging interface. When the device is charging, the status LED lights up blue. If a metallic object is detected on the charging interface, the status LED flashes blue.
3. Remove your device from the charger when it is fully charged.

Maintenance, Care, Storage and Transportation

• The product is maintenance-free.

NOTICE:  Material damage

• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.

Disposal Instructions

According to the European WEEE directive, electrical and electronic equipment must not be disposed with consumers waste. Its components must be recycled or disposed apart from each other. Otherwise contaminative and hazardous substances can damage the health and pollute the environment. As a consumer, you are committed by law to dispose electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the devices lifetime for free. Particulars are regulated in national right. The symbol on the product, in the user manual, or at the packaging alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an important share to environmental protection.

WEEE No: 82898622

EU Declaration of conformity

Hereby Goobay®, a registered trademark of Wentronic GmbH, ensures that the mentioned radio system type is conformed to Directive 2014/53/EU. The full text of EU Declaration of Conformity is available at the following Internet address: https://www.wentronic.com/en/
Enter the item number in the search bar to go to the specific item page. The current declaration of conformity is available in the download section.

Subject to change without notice.

Goobay® by Wentronic GmbH
Pillmannstraße 12 | 38112 Braunschweig | Germany

References

• Electronic accessories wholesaler with top brands | Wentronic
• Grossiste en accessoires électroniques avec les meilleures marques | Wentronic
• Grossista di accessori elettronici con i marchi più importanti | Wentronic
• Hurtownia akcesoriów elektronicznych z najlepszymi markami | Wentronic

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>