FERRO CONCEPTS 7-10 The Hangboard Instruction Manual

FERRO CONCEPTS 7-10 The Hangboard

Product Information

Specifications:

• Product Name: The HangboardTM
• Attachment: MOLLE-compatible
• Size : 1-row by 6-column
• Material: Hook and loop, nylon

Product Overview
The HangboardTM is a MOLLE attachment that can be used with carriers like The DanglerTM and The Mini DanglerTM. It provides additional storage options by converting pockets into DanglersTM or securing items with shock cords for quick access. It acts as a universal DanglerTM adapter.

Features:

• Compatible with MOLLE systems
• 3×9.25 section of hook and loop for attachment
• Can be used with various Ferro Concepts products

Product Usage Instructions

**** Weave MOLLE straps through the top row of laser-cut MOLLE on The HangboardTM.

1. Weave MOLLE straps through the bottom row of laser-cut MOLLE on The HangboardTM.
2. Continue weaving the MOLLE straps through the MOLLE-equipped item to secure The HangboardTM.
3. Finish weaving MOLLE straps on the MOLLE-equipped item and insert tuck tabs if applicable.
4. Attach The HangboardTM to the carrier by fastening the hook to the loop inside the plate pocket.
5. Re-insert the armor plate and plate flap, ensuring a secure fit.

The HangboardTM Shock Cord Routing:

1. Loop the shock cord through the top two laser-cut MOLLE slots and the two slots beneath it to create two loops.
2. Fit the item to be secured onto The HangboardTM through the loops.
3. Push the shock cord through the cord lock and adjust to desired tightness.

Product Overview

The Hangboard™ is a one-row by six-column section of MOLLE that at-taches to carriers just like The Dangler™ and The Mini Dangler™. Utilizing a 3”x9.25” section of hook and loop, The Hangboard can be tucked under front flaps or in the plate bags. Turn things like our 6×5 and 6×9 General Purpose Pockets into Danglers™ for some extra storage or secure things like door charges with some shock cord for quick access! You can think of The Hangboard™ as a universal Dangler™ adapter.

Features

• Allows for running accessories as Danglers™
• Can be run with either hook forward or loop depending on need
• Works as a platform for storing things like door charges
• Attaches in your plate bag or under your front flap
• Compatible with any armor carrier that has loop velcro on the front or rear as well as any plate pockets that secure with hook and loop
• The Retention Collection can be used to tie down items to

The Hangboard™

Made in USA

Components: The Hangboard™

Installation

1. To attach MOLLE-equipped items to The Hangboard™, start by weaving the MOLLE straps through the top row of laser-cut MOLLE on The Hangboard™. The orientation of The Hangboard™ can be swapped to either side. Take a second to verify which direction it should face before weaving the MOLLE.
2. Once top row is complete, weave the MOLLE straps through the bottom row of laser-cut MOLLE on The Hangboard™.
3. Continue weaving the MOLLE straps through the MOLLE equipt item to secure The Hangboard™.
4. Finish weaving MOLLE straps on MOLLE equipt item. Insert tuck tabs if applicable.
5. To install on a carrier, remove the armor plate and securely fasten the hook of The Hangboard™ to the loop inside the plate pocket.
6. Re-insert the armor plate.
7. Re-insert the plate flap into the plate bag. Attach the hook of the plate flap closure to the loop on the front of The Hangboard™.
8. Alternatively, The Hangboard™ can be mounted between the carrier and front flap for a quick DON/DOFF solution.

Shock Cord Routing

• Tubular Nylon on The Hangboard™ with Shock Cord Retention
• Slap Charges on The Hangboard™ with Shock Cord Retention

1. Loop the shock cord through the top two laser-cut MOLLE slots, then the two slots beneath it. This creates two loops.
2. Test fit the item you’re trying to secure to The Hangboard™. With the item through the loops, push the shock cord through the cord lock. Cinch it down to where you want it.
3. Tie the shock cord in an overhand knot. We suggest not tying the knot at the cord lock. Instead, leave yourself some room for further adjustments later.
4. Cut the shock cord and burn the ends.
5. Repeat steps 1-4 to finish.
6. The method outlined above isn’t the only way to secure items to The Hangboard™ with shock cord. There are all sorts of ways to do it!

FAQs

Q: Can The HangboardTM be used with any carrier?
A: The HangboardTM is designed to be compatible with carriers that support MOLLE attachments. Ensure your carrier has the necessary loops for installation.

Q: What is the maximum weight capacity of The HangboardTM?
A: The HangboardTM is designed to securely hold various items within the recommended weight limits of your carrier. Avoid overloading to maintain product integrity.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>