PARD NIGHTWARRIOR4K Digital Night Vision Camera Instruction Manual

PARD NIGHTWARRIOR4K Digital Night Vision Camera

FAQ

• Q: How can I update the firmware of my Night Warrior 4K?
  • A: To update the firmware, visit PARD’s official website for the latest information and follow the provided instructions for firmware upgrade.
• Q: What should I do if my device encounters operational issues?
  • A: If you face any problems with your device, contact our after-sales team and report the issues on our official website to maintain warranty service validity.

To Users

Thank you for your continued support and for choosing PARD Night Warrior 4K night vision device. Please read this manual carefully before using the device for the first time.
Please follow the instructions in this manual to avoid any damage caused by improper use and to ensure that your device operates properly.

After reading, please keep this manual in a safe place, for future reference. This manual provides step-by-step instructions on how to use your night vision device and is intended for your reference only.
Some variations may inevitably occur due to upgrades in the firmware, we recommend you visiting PARD’s official website for the most up-to-date information. PARD reserves the final right of interpretation of this manual.

Precautions

• Please remove the insulating tape before using the battery for the first time. It is recommended to use a fully charged lithium-ion battery with a rated voltage of 3.7V.
• When not in use, always turn off the device. If you are not going to use the device for more than 10 days, please remove the battery and store it in a safe place.
• Use extreme caution and care when using or transporting the device. It is recommended that original packaging be used during transportation.
• To avoid eye damage, avoid staring directly into the infrared fill light from a close distance!
• When this product’s IR infrared light is turned on, it will use a large amount of energy. Aiming at flammable objects up close is absolutely prohibited because doing so could start a fire. Please go into sleep mode or turn off the IR infrared fill light when not in use.
• The device should be stored in a cool, dry, ventilated environment free of strong electromagnetic fields, with temperatures no lower than -25℃/-13℉and no higher than 40℃/104℉.
• Do not disassemble the device without authorization. If you encounter any problems, please contact our after-sales team and report them on our official website. Failure to do so will render the warranty service null and void.

Description & Key Features

The Night Warrior 4K is back mounted digital night vision the latest addition to the Night Warrior 4K series, featuring a high sensitivity 2K CMOS sensor and advanced technology. Convert your standard Day Scope into a high- performance night vision system quickly and easily. The Night Warrior 4K， is designed for a variety of uses, including hunting and sport shooting.

Key features:

• Quick attach and detach
• Shorter body Length,
• Extremely sensitive 2560*1440 CMOS sensor
• 1200yds Rangefinder
• Direction IR light
• Self-activated recording
• Stealth mode
• WiFi
• Firmware upgrade
• IP67 Waterproof
• 6000J Recoil resistance

Components & Controls

1. Key 1
2. Key 2
3. Key 3
4. Key 4
5. Objective lens
6. IR light
7. Ranger
8. Battery cap
9. Diopter

1. Type-C charging port
2. HDMI port T
3. TF card slot

Unboxing

Installation

Before using this device, please do the following:

1. Open the box and remove the device.
2. Check to ensure that the package contents listed above are all included in the box.
3. Check the device for any damage to the display, body, lens, buttons, etc.
4. Make sure that the objective lens and eyepiece are clean & functioning properly.

Note: If any accessories are missing or damaged, please contact our after sales service at once.

Battery Installation And Startup

The battery installation steps are as follows:

1. Unscrew the battery cap counterclockwise and remove the battery.
2. Remove the insulating tape.
3. Insert the battery, ensuring that the positive (+) side goes in first and tighten the battery cap clockwise.
4. To turn on the device, press and hold the power button for about 3 seconds. (When the power light illuminates and the PARD Logo appears on the screen, the device is ready for use.)

Note

• Please use a single 18650 rechargeable lithium-ion battery rated 3.7V voltage.
• Do not put battery into fire.
• Do not put device into water when the battery cap is open.
• Do not disassemble the device without authorization.
• Do not pierce the device with sharp objects.
• Battery should be kept out of reach of children, and the positive and negative terminals of the battery should be installed correctly.

Diopter And Objective lens focusing

Diopter Focusing

Diopter focusing is used to adjust users with different levels of corrected vision to clearly see the content displayed on the screen.

1. After powering the device, rotate the diopter focusing wheel so that you can see the screen clearly.
2. As long as you can clearly see the crosshair and text on the display, the diopter focusing setting has been completed.

Note

• The image may not seem clear after diopter adjustment, as the objective lens still needs to be focused.

Objective lens focusing

1. Before you focus the objective lens, ensure that the diopter focusing has been completed.
2. Aim at the target and adjust the objective focusing knob until you can see the crosshair in the optic scope clearly from the eyepiece.

Operation Instruction

Shortcut Mode

Explanation

Key 1

• Single press：

1. Home screen mode: press [Key 1] to open a menu;
2. Menu mode: press [Key 1] in the menu mode to return to preview mode.

• Press and hold：
  • Long press [Key 1] in preview mode to turn on/off the red dot laser;

Key 2

• Single press：
  • Home screen mode: press [Key 2] to Representing the downward function
• Press and hold：
  • Home screen mode: press and hold [Key 2] to photograph.

Key 3

• Single press：

1. Click [Key 3] in preview mode to turn on the distance measurement function;
2. Click [Key 3] in menu mode to confirm;

• Press and hold：
  • Long press [Key 3] in preview mode to activate the recording function, and long press [Key 3] again to save the recording and exit;

Key 4

• Single press：
  • Click [Key 4] in menu mode to move up;
  • Click [Key 4] in menu mode to turn on/off the picture in picture mode;

Key 5

• Press and hold：
  • Power switch

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement.
This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co- located or conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>