PARD NV007V Rear Mounted Night Vision Add On User Manual

: June 17, 2024
: PARD

Table of Contents

PARD NV007V Rear Mounted Night Vision Add On
Product Usage Instructions
Components and Controls
Installation
Key Features
Precautions
Speciﬁcations
Statement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PARD NV007V Rear Mounted Night Vision Add On

PARD-NV007V-Rear-Mounted-Night Vision-Add-On-PRODUCT-
IMAGE

Specifications:

Model: NV007V
Magnifying Power: 4-14x
IR Power: 5W
Photo Resolution: 2608 x 1944 pixels
Battery Life: 8 hours
Battery Type: Li-ion 18650
Battery Quantity: 1
Weight: 250g
Eyepiece Resolution: 1024 x 768 pixels
Output Type: .mp4
IR Wavelength: 850/940nm
Dimension: 106 x 97 x 47 mm
Storage Type: TF card
Video Resolution: 1920 x 1080 pixels
IR Illuminate Distance: 300m
Frame Rate: 30fps
Voltage: 3.7V

Product Usage Instructions

Battery Installation:
The unit comes with a 3.7V 18650 Lithium rechargeable flat battery.

To install the battery:

Remove the battery compartment cap.
Slide the battery (positive end first) into the compartment.
Replace the cap and tighten it firmly to ensure proper contact with the terminals.

Eye Piece Adjustment:
The dioptric adjustment is essential for clear vision.

Follow these steps:

Turn the eyepiece dioptric until the menu is in sharp focus.

Objective Lens Focusing:
To focus on an object:

Turn the objective lens ring until the object is in clear focus.
Ensure the eyepiece dioptric adjustment is done before focusing the objective lens.

FAQ:

Q: What is the battery life of the NV007V?
A: The NV007V has a battery life of approximately 8 hours.
Q: What is the IR wavelength of the device?
A: The IR wavelength of the device is 850/940nm.
Q: What is the video resolution supported by the NV007V?
A: The NV007V supports a video resolution of 1920 x 1080 pixels.

Scan To Enjoy Privilege

$PARD-NV007V-Rear-Mounted-Night Vision-Add-On-$1$$

Scan The QR Code To Join Our Membership

Extend warranty
Enjoy 1 on 1 expert service
Get the product experience officer opportunity

Package Contents

Contents	Quantity
Pard 007V	1
Hexagon wrenches	1
USB Data Cable	1
Hexagon wrenche	1

Components and Controls

$PARD-NV007V-Rear-Mounted-Night Vision-Add-On-$2$$

Installation

Battery Installation
The unit is supplied with 3.7V 18650 Lithium re-chargeable ﬂat batteries. To Load the battery remove the battery compartment cap, slide the battery (positive + polar end ﬁrst) into the battery compartment. Replace the cap and tighten ﬁrmly to ensure the battery is fully contained and both ends of the battery are in contact with the battery terminals. Failure to do so may result in intermittent fault.

Eye piece adjustment
The dioptric adjustment is designed to ensure a clear visual image through the unit for people with varying levels of focused vision. Turn the eyepiece dioptric to bring the menu into sharp focus as you require. The unit once set up is set to your personal needs and no further adjustment should be need.

The objective lens focusing
Focus the unit on the intended object and turn the objective lens ring accordingly until you have the object in clear focus. (Please ensure that you have adjusted the dioptric eyepiece before focusing the Objective lens adjustment.)

Key Features

Quick mount and release
Newly upgraded image sensor 350m
Stretchable ﬁll light
All-glass multi-coated lens
Larger rubber eye cup
Photo and video recording
Optical and digital magniﬁcation
WiFi connection
6000J recoil resistance
Eyepiece adjustment
18650 Lithium battery and USB Type-C

Precautions

Please remove the insulating tape from the battery before ﬁrst use. It is recommended to use a fully charged lithium-ion battery with a voltage rating of 3.7V.
Please turn oﬀ the device and remove the battery when it’s not in use for more than 10 days and store the device & battery in a dry and safe place.
Be extra cautious and handle the device with care during use or transportation. It is recommended to use the original packaging during transportation.
Do not use the device to focus directly on strong sources of light such as the sun or electric welding. The detector may be damaged, and it will void the warranty.
Avoid lens scratches and damage caused by oil or chemical contamination of the lens. Keep the lens cap on when not in use.
Do not disassemble the device without authorization. If you encounter any problems, please contact our after-sales and report any issues. Failure to do so will render the warranty service null and void.
Attention : All PARD night-vision and thermal imaging devices require a license to be exported outside the country.

Speciﬁcations

Model	NV007V
Magnifying power (x)	4-14
IR power (w)	5
Photo resolution (pixel)	2608*1944
Battery life (h)	＞8
Focusing	3cm-∞
Battery	Li-ion18650*1
Weight (g)	250
Eyepiece resolution	1024*768
Output type	.mp4

Statement

FCC WARNING
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.
this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modiﬁcations not expressly approved by the party responsible for compliance. such modiﬁcations could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.