PARD NV008S Infrared Digital Night Instruction Manual

June 9, 2024
PARD

PARD NV008S Infrared Digital Night

PARD-NV008S-Infrared-Digital-Night-PRODUCT

Product Information

NV008S-LRF
This is a digital night vision device with a rangefinder version. It is designed to provide clear images and videos in low light conditions. It comes with an IR infrared light, HDMI, TF Type-C, and support for 18650 3.7V batteries. It has a maximum range of 1200m and a resolution of 1920×1080 at 30fps.

NV008S
This is a digital night vision device with a standard version. It is designed to provide clear images and videos in low light conditions. It comes with an IR infrared light, HDMI, TF Type-C, and support for 18650 3.7V batteries. It has a maximum range of 350m and a resolution of 1024×768 at 30fps. Both versions come with a warning not to look at the IR infrared light directly as it can damage your eyes. They also come with a warning that massive power will be gathered when the infrared light is turned on, so they should not be aimed at flammable items at a close range.

Product Usage Instructions

  1. Ensure that you use a rechargeable battery with a rated voltage of 3.7V.
  2. Do not look at the IR infrared light directly to prevent eye damage.
  3. Do not aim the device at flammable items at a close range when the infrared light is turned on, as it can cause fire.
  4. After use, turn off the infrared light or enter sleep mode.
  5. Do not attempt to disassemble or repair the device without authorization as it will void the warranty. Contact the maintenance point in case of any issues.
  6. Use the IR infrared light to enhance visibility in low light conditions.
  7. Use the HDMI and TF Type-C to connect to other devices and transfer data.
  8. Use the buttons labeled +/- OK to adjust settings and navigate through the menu.
  9. The device comes with support for 18650 3.7V batteries which should be inserted as per the instructions provided in the manual.
  10. For the NV008S-LRF version, use the rangefinder feature to measure distance accurately.

Notes

  1. Don’t look at the IR infrared light directly, or it will damage your eyes!
  2. Massive power will be gathered when the infrared light is turned on. Daim at flammable items at a close range, otherwise it may cause fire. Please turn the infrared light off or enter sleep mode after use. on’t
  3. Please use a rechargeable battery with a rated voltage of 3.7V!
  4. Attempts to disassemble or repair the device without authorization will void the warranty. Please contact with the maintenance point in time if there’s any needs.

OVERVIEW

PARD-NV008S-Infrared-Digital-Night-FIG-1

Package Contents

The packaging contains night vision optics with the following:

  • NV008S/NV008S-LRF; Type-C cable;
  • Hex-nut wrenches; Mount;
  • 18650 3.7V Li-ion battery carrying box

Storage card is not included. Please prepare a TF card (128g maximum) for data storage.

Installation

Battery installation
Remove battery compartment cap and insert a 18650 3.7V Li-ion battery with its positive polar towards to the direction inward. Then put the cap back and screw it tightly. ( Fail to do so may result in restarting!)

Adjustments

Rotate and adjust the eyepiece dioptre adjustment ring until you can see the four-character icon on the screen ( there’s no need to see a clear image ), then rotate the Objective lens adjustment ring until you can see the target clearly. Next, switch to different modes, test IR, Red dot and Rangefinder to check the function of the device.

Mount Installation
There are five mounting holes in the base of the device. Attach the mount to the base of the device by using a hex-nut wrench and screws. The mount can be installed in multiple rails. a long press of the Power button. The power indicator will keep light when the device is turned on.

Sleep Mode:
Enter sleep mode with a short press of the Power/Sleep button when the device is on. Power indicator will keep light when the device enters sleep mode.

The Eyepiece D . dioptre Adjustment

The purpose of dioptre adjustment is to get a clear image for users with a different vision. Rotate and adjust the dioptre adjustment ring until you get a clear view of the four-character icon on the screen. One adjustment only for each eye. (Please note that the image is not clear normally without the adjustment of objective lens.)

The Objective Lens Adjustment
Make sure the eyepiece dioptre adjustment is finished. Aiming at your target, rotate and adjust the objective lens ring until you get a clear and well-focused image.

IR Fill Light Control

  • Turn on the device, enter black and white mode with a long press of IR button. Switch to IR level 1-3 or off with a short press of IR button. The part of fill light is stretchable which can be twisted out or back to make an quick adjustment.

Red Dot Adjustment

  • Turn on the device, then turn the laser on/off with a long press of Laser/Menu button. The position of laser can be adjusted on the laser adjustment holes by a hex-nut wrench.

Menu operation

  • Enter the menu with a short press of Menu button. Press +/- button to select options. Enter a submenu with a short press of OK button. Exit the menu with a short press of Menu button.

1 >BC Setting (Ballistic Calculation)

Enter the BC Setting by a press of OK button, then press “+” or “-” button to switch among ballistic calculation Parameters/ON/Off options. Confirm your selection with a short press of OK button

After entering the ballistic calculation parameter setting, press the menu/ok button to move up and down to select sub-options and +/- button to adjust the value of them. (support to save 5 groups of ballistic data in this devices. After selecting A-E bullet data, adjust the values of Target Vely, Bullet weight, Bullet BC, Altitude, Temperature, Scope Ht and Zero Range accordingly). To save and return to the observation interface by a long press of the menu button.

2 >Range Unit Selection
Enter the submenu range unit selection with a short press of OK button. Select “Meter” or “ Yard” with a short press of +/- button. Confirm your selection with a short press of OK button.

3 >PIP (Picture-in-Picture)
Enter the submenu PIP mode with a short press of OK button. Select “off, on, shortcut key off or shortcut key on” with +/- button. Confirm your selection with a short press of OK button. Once the shortcut key of PIP is turned on, enter or exit PIP mode with a long press of Menu button. (Laser function can not work in this situation)

4 >Reticle Adjustment
Enter the submenu reticle adjustment with a short press of OK button. Select options with a short press of OK button and adjust value with short press of +/- button. To confirm your setting by enter “Save” with a short press of + button or cancel with a short press of – button, then press OK button to confirm and exit.

5 >Gyroscope
Enter the submenu Gyroscope with a short press of OK button. Select “Display” or “Calibration” with a short press of +/- button. Select “On” or “Off” to turn on/off the gyroscope after entering “Display”. Turn on the gyroscope before you select “Calibration”. Enter “Calibration” by a short press of OK button. Keep the
machine level and stand still for about 8 seconds to complete the calibration.

6 >Default Magnification
Enter the submenu Default Magnification with a short press of OK button. Select “6.5x” or “13x” as default magnification and confirm your selection with a short press of OK button.

7 >Default Color

Enter the submenu Default Color with a short press of OK button. Select “Color” or “Black & White” mode with a short press of +/- button, then confirm your selection with a short press of OK button.

8 >Brightness Of IR
Enter the submenu Brightness of IR with a short press of OK button. Select “Off” ,“1”, “2”, or “3” with a short press of +/- button. Confirm your selection with a short press of OK button. Please note this setting is for the default brightness of IR. Pressing IR button under Black & White mode for instant setting of IR brightness.

9 >Brightness
Enter the submenu Brightness with a short press of OK button. Select “LEVEL 0”, “LEVEL 1”, “LEVEL 2”, “LEVEL 3” or “LEVEL 4” , LEVEL 5”,“LEVEL 6” with a short press of +/- button. Confirm your selection with a short press of OK button.

10 >Auto Recording

Enter the submenu Auto Recording with a short press of OK button. Select “Off” or “ On” with a short press of +/- button. Confirm your selection with a short press of OK button.

11 >Loop Recording

Enter the submenu Loop Recording with a short press of OK button. Select “Off” , “3 minutes”, “5 minutes” or “10 minutes” with a short press of +/- button. Confirm your selection with a short press of OK button.

12 >Self-activated Recording

Self-activated Recording means device will keep recording at background, every 20 seconds as an interval. Once it “sensed” a rifle shooting, the 20 seconds video where the moment of shooting happens will be automatically saved in TF card.Enter the submenu Self-activated Recording with a short press of OK button. Select On/Off with a short press of +/- button and confirm your selection with a short press of OK button.

13 >Date Stamp
Enter the submenu Date Stamp with a short press of OK button. Select “Off” or “ On” with a short press of +/- button. Confirm your selection with a short press of OK button.

14 >Record Audio
Enter the submenu record audio with a short press of OK button. Select “Off” or “ On” with a short press of +/- button. Confirm your selection with a short press of OK button. This setting is to realize an audio or a silent video.

15 >Beep sound
Enter the submenu beep sound with a short press of OK button. Select “Off” or “ On” with a short press of +/- button. Confirm your selection with a short press of OK button. This setting is to choose whether the keyboard press sound will be recorded into the video or not.

16 >WiFi
Enter the submenu WiFi with a short press of OK button. Select”Off” or ” On” with a short press of +/- button. Confirm your selection with a short press of OK button. Exit WiFi with a long press of Menu button. ( ) The Menu page can not be opened while WiFi is turned on The default user name and password of WiFi are PARD and 12345678. The corresponding APP is available on PARD official website(www.pard.com).

17 >Exposure
Enter the submenu exposure with a short press of OK button. Select one of the options with a short press of +/- button. Confirm your selection with a short press of OK button.

18 >Language
Enter the submenu Language with a short press of OK button. Select one of the options with a short press of +/- button. Confirm your selection with a short press of OK button.

19 >Date/ Time
Enter the submenu “Date/Time” with a short press of OK button. Select one of the options with OK button. Set value for year, month and date with a short press of+/- button. Select “YY /MM/DD”, “MM/DD/YY”or “DD/MM/YY”as your date format with a short press of +/- button. Save selected date and exit the submenu with a short press of Menu button.

20 >Format

Enter the submenu “Format” with a short press of OK button. Select “Cancel” or “ OK” with a short press of +/- button. Confirm your selection with a short press of OK button. Please be careful, the data can not be recovered after the device is formatted.

21 >Default Setting
Enter the submenu “Default Setting” with a short press of OK button. Select “Cancel” or “ OK” with a short press of +/- button. Confirm your selection with a short press of OK button.

22 >Version

  • Press “OK” after the “Version” option is selected by the cursor to check the current version number of the device.

Shortcuts

  • Power/Sleep button Turn on the device with a short press of power button, turn off the device with a long press of power button. Enter or exit sleep mode with a short press of sleep button.

Specifications

Model

| NV008S|

Ranging range

| /|

Dimension (mm)

| 1827053.5
---|---|---|---|---|---
NV008S-LRF| 3.5-1200m| 18271.553.5
Magnifying power|

6.5x-13x

| IR wave length|

850nm

|

Weight

| 415g
445g
Output type| AVI| Storage type| T F Card| Battery life| 8h(max)
Voltage| 3.7V| Focusing| 3cm-∞| Transmission method| WiFi
Video resolution| 19201080| IR power| 5w| IR illuminate distance| 350m
Eyepiece resolution| 1024
768| Frame rate| 30fps| Battery| 18650×1

Warranty Card

  • Product model:
  • Product code:
  • Date of purchase:
  • Warranty period:
  • User Name:
  • User’s phone:
  • User address:
  • Warranty records:

REMARK :

PARD has an original mount included in the NV008S/NV008S-LRF standard package. In order to have the best usage experience, we highly recommended users make use of PARD original mount when apply the device to your rifles.  If users want to use their own mount, there may be some variance when zeroing the machine normally. PARD provides 2 pieces of small metal plates in the product package, for users put at the rail to adjust the horizontal level when mounting SU/SU-LRF on. PLEASE CONSULT OUR ONLINE CUSTOMER SERVICE IF YOUR HAVE ANY PROBLEM WHEN MOUNTING OUR DEVICES AT YOUR ORIGINAL RIFLE RAIL.

Warranty

Notice::
This product is warranted against defects in materials and workmanship for a period of three years from the date of purchase. Attempts to disassemble or repair the device without authorization will void the warranty. Please contact with the factory in time if there is anything wrong. The warranty does not cover damage caused by human factors, accident, misuse of the product including use in abnormal working conditions, failure to follow instructions. No warranty is offered for products which have gone beyond the period of warranty. All rights reserved.

  • E-mail:support@pard-tech.com
  • Telephone:+86-0755-29484438
  • Website:www.pard-tech.com
  • Address: Building A Hengxingchang Industrial Park, Baoshi East Road, Shiyan, Bao’an, Shenzhen, 518000, China

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals